E1

Defective temperature sensor.

Issue:

Defective temperature sensor. It will have to be replaced.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Fridge Freezer Repairss in London.

E2

Fail sensor of the evaporator

Issue:

Fail sensor of the evaporator of the refrigerating chamber;

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Fridge Freezer Repairss in London.

E3

Faulty sensor freezer

Issue:

Faulty sensor freezer

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Fridge Freezer Repairss in London.

E4

Defective temperature sensor

Issue:

Defective temperature sensor of the freezer condenser. Likely need a replacement temperature sensor;

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Fridge Freezer Repairss in London.

E01

Infringement of a temperature mode

Issue:

Infringement of a temperature mode. In the worst case when issuing such a code may need to replace the motor-compressor, as it sets the energy to maintain the necessary degree;

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Candy Fridge Freezer Repairs in London.

E02

E02 - Malfunction of the thermostat

Issue:

Malfunction of the thermostat. It is installed as a connecting link between the compressor and the sensors, sends signals about the need to reduce or increase the temperature. If the damage mode is broken

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Candy Fridge Freezer Repairs in London.

E03

E03 - Malfunction of the thermostat

Issue:

Malfunction of the thermostat. It is installed as a connecting link between the compressor and the sensors, sends signals about the need to reduce or increase the temperature. If the damage mode is broken

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Candy Fridge Freezer Repairs in London.

E04

E04 - Failed temperature sensor.

Issue:

Failed temperature sensor. This failure is very common, as this component works continuously. Replacement temperature sensor – required repairs. One of the codes (E04) points to the work of the refrigerant, the second refrigeration departments. In the second case often requires replacement of the TENA evaporator.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Candy Fridge Freezer Repairs in London.

E05

E05 - Failed temperature sensor.

Issue:

Failed temperature sensor. This failure is very common, as this component works continuously. Replacement temperature sensor – required repairs. One of the codes points to the work of the refrigerant, the second refrigeration departments. In the second case (E05) often requires replacement of the TENA evaporator.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Candy Fridge Freezer Repairs in London.

-

Knob error

Issue:

Knob continuously working or broken cable

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er03

Continuous use of the buttons; the control unit switches off after 10s

Issue:

Water or pots on the glas of the hob, on the control unit

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er20

Flash Error

Issue:

uC- faulty

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er22

the control unit switches off after 3,5 - 7,5 sec

Issue:

Short circut or key recognistion disconnected

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er31

Wrong configuration - Faulty connection between controls and induction board

Issue:

induction system not configured. It has been fitted a wrong control board. Faulty filter board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er47

Connection error between the controls and the inductor

Issue:

Faulty controls - Faulty or disconnected control board connection cable. Faulty filter board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

E / 2

The tempreture probe notices an overheating of the induction plate

Issue:

The cooking zone has been excessively overheated

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

E / 5

Error filter board

Issue:

Faulty filter board

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

E / 6

Supply voltage problem - Power board

Issue:

Lack of the L2 phase - Power board faulty (PCB)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

E / 7

Error of inner connection

Issue:

Error of inner connection

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

E / 9

Faulty tempreture probe

Issue:

Mechanic defect or ohmic variation of the heating element

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

U400

Overvoltage

Issue:

Appliance wrongly connected at 400V

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er00

No Errors

Issue:

Only internal

Advice:

This is normal, no remedy required.

Er01

Main switch does not drop off

Issue:

After expiry of a period of time, the control system normally switches off the main switch. The relay has not dropped off within 30s.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er02

Test RAM not correct

Issue:

Unauthorised change of constants in RAM - On diagnosis: RAM write / read error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er03

Key Time Out (not indicated)

Issue:

Unauthoriesd auction of key for longer than x seconds.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er04

SCI

Issue:

Incorrect call-up of internal test routine.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er05

Program counter in invalid range

Issue:

Program counter of the control module is outside the program triggering a reset.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er06

Heat indication limit reached

Issue:

External heat detection contacts fail to reopen after a period of time

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er07

Time Out EEPROM

Issue:

Reading operation with EEPROM took too long

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er08

Wrong cooking power level

Issue:

Cooking power level not '0' for switched off cooking zone or cooking power level was not between '1' and '9'

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er09

Dual circut wrong

Issue:

Dual circut switched on although the cooking zone was off

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er10

Programme items check

Issue:

Too many, or too few, programme parts per programme run were worked off

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er11

Stack overflow

Issue:

Maximum stack size exceeded

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er12

Relay port not idential with copy

Issue:

The signals for the relay not identical with a backup copy in RAM

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er13

EEPROM does not contain any valid data

Issue:

Data loss in EEPROM

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er14

EEPROM not recordable

Issue:

EEPROM defective

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er15

Reset by software watchdog

Issue:

Reset by software watchdog

Advice:

…

Er16

PSD: Oscillator frequency

Issue:

During diagnosis, not all oscillators of the electronic pan detection oscillate with the pre-set frequency.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er17

Periphery: interruption

Issue:

During diagnosis, a level was detected at a port which, beause of its terminating resistance, should not be present

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er18

Periphery: short circut

Issue:

During diagnosis, a connection to an adjucent port pin entdeckt.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er19

Heat detection contacts interrupted

Issue:

External detection contacts are open after a period of time

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er20

ROM check sum incorrect

Issue:

ROM check sum incorrect

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er21

Over tempreture

Issue:

During diagnosis an overtempreture was detected

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er22

Key not recognised

Issue:

During diagnosis, a (requested) key was not recognised during a given period of time, or a hardware fault was recognised.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er23

PWM

Issue:

PWM frequency for relay not within valid limits

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er24

…

Issue:

…

Advice:

…

Er25

Secondary voltage of mains supply circut ti high (primary>300V)

Issue:

Secondary voltage of mains supply circut ti high (primary>300V)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er26

Relay voltage too high when switched off (set value: 0V)

Issue:

Relay voltage too high when switched off (set value: 0V)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er27

Heat sink sensor

Issue:

Short circut or broken

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er28

Electronic pan detection parameter

Issue:

Transfer to ASIC not OK

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er29

Cooking zone assignment

Issue:

Assignment of TC keys to cooking zone not OK

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er30

EEPROM

Issue:

Data not plausible ( see also Er13 and Er14)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er31

Invalid variant recognition

Issue:

Invalid variant recognition

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er32

2-/4-x-induction

Issue:

Wrong induction module connected

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Er33

Synchronising pulse (mains zero voltage) absent

Issue:

Synchronising pulse (mains zero voltage) absent

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.

Error 0

Error 0 – Faulty Wiring or Control Module

Issue:

Faulty Wiring or Control Module. Check all control boards and the wiring and connections around your machine to find the fault causing this error code to display.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 1

Error 1 – Door Lock Error

Issue:

This fault code indicates a problem with the door lock.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 2

Error 2 – Filling Problems

Issue:

Check the tap that lets the water supply into your appliance is fully open and that the inlet hose is not squashed. Check the valve that lets water into your machine too.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 3

Error 3 – Draining Problems or Pressure Switch Issue

Issue:

This error code could be caused by a blocked filter or a blocked or faulty drain pump. Drainage problems

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 4

Error 4 – Faulty Inlet Valve

Issue:

This error code indicated there is a problem with the valve that lets water into the washing machine.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 5

Error 5 – Temperature Sensor Fault

Issue:

The temperature sensor monitors the temperature of the water in your washing machine. If it has developed a fault it will need to be replaced.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 6

Error 6 - Faulty Wiring or Control Module

Issue:

As with Error 0 this fault could relate to any area in your washing machine so you’ll need to observe the machine and check the control boards and wiring to get to the bottom of the fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 7

Error 7 – Faulty motor

Issue:

Faulty motor (Worn carbon brushes). Error 7 indicates that the washing machine motor isn’t working as it should.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 8

Error 8 – Faulty Motor Tacho

Issue:

Faulty Motor Tacho. (The motor tacho is the part of the washing machine motor which monitors spinning speed.)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 9

Error 9 – Faulty Motor Triac

Issue:

The triac is the part on your washing machine control board that communicates with the motor to control the spinning speed of the washing machine. A control module may need replacing if the triac is displaying as faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 10

Error 10 – Programme Selector Fault

Issue:

Your main washing machine control module may either need replacing or reprogramming.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 12

Error 12 – Communication Error Between Control Boards

Issue:

Error 12 indicate problem with the control boards or wiring.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

Error 13

Error 13– Communication Error Between Control Boards

Issue:

Error 13 indicate problem with the control boards or wiring.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Washing Machine Repairs in London.

E003

The appliance is too hot

Issue:

If E003 flashes on the display the appliance is too hot. Switch off the applianceand let it cool down.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

E303

The appliance is too hot

Issue:

If E303 flashes on the display the appliance is too hot. Switch off the applianceand let it cool down.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

E115

The appliance is too hot

Issue:

If E115 flashes on the display the appliance is too hot. Switch off the applianceand let it cool down.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

E215

The appliance is too hot

Issue:

If E215 flashes on the display the appliance is too hot. Switch off the applianceand let it cool down.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

x

Exhibition Mode

Issue:

If the x symbol appears on the standby screen,exhibition mode is activated. The appliance doesnot heat up.

Advice:

Disconnect the appliance from the electricity for afew seconds (switch off the household fuse or thecircuit breaker in the fuse box). Within 3 minutesafter reconnecting the appliance, go to the basicsettings menu and deactivate exhibition mode.

…

Power Cut

Issue:

The appliance bridges a power cut of up to5 minutes. The operation continues.

Advice:

After a longer power cut the appliance will switch off the operation. The J symbol appears on the display and three dashes instead of the temperature. Switch off the temperature knob and switch theappliance back on. The "first settings" menu reappears if the applianceis without electricity for several days. You have toreset the clock.

©

© appears on the display. The steamer doesn't heat up.

Issue:

The child lock is activated.

Advice:

Turn off child lock.

…

Appliance turns off. Hyphens are blinking on the display.

Issue:

Safety lock

Advice:

Turn off appliance. Then you can turn it on again as usual.

…

Display indicates error message (e.g. F01, F02, etc.).

Issue:

Electronic malfunction

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

©

© lights up on display. The steamerdoesn't heat up.

Issue:

Overheating protection: No fluid incooking basin. Overheating protection: Appliancewas run for too long at steam cooking ¥ levelwithout glass cover. Overheating protection: The cookingbasin was filled with very hot water. Overheating protection: Cookingbasin is heavily calcified. The outline ofthe heating element begins to show onthe bottom of the cooking basin as awhite residue. If the © symbol lights up after turning the appliance back on, although the appliance is completely cooled down, notify the Gaggenau customer service.

Advice:

Turn off appliance. Fill with cold water atleast to the minimum mark. Let appliance completely cool down. Turn off appliance and let it completely cool down. At steam cooking level, put onglass cover. Turn off appliance and let it completely cool down. Fill cooking basin with coldwater. Turn off appliance and let it completely cool down. Wipe out cooking basin with amixture of vinegar and water or a food-safe decalcifier. Rinse out afterwards with clear water.

¤

¤ blinks on the display.

Issue:

Drain valve is not properly opened orclosed.

Advice:

Close the drain valve. If it is blocked by residues open the drain valve again. Then remove the residues with a suitable tool (e.g. handle of a wooden spoon).

Appliance is not working. Both illuminated rings flash alternately fast.

Issue:

Installation error

Advice:

Check correct fitting of the connecting cable tothe control panel.

The corners of the appliance curveupwards slightly during operation.

Issue:

The heat causes the cooktop's metal to expand.

Advice:

This is normal. No curving is visible after cooling down.

U400

The hob is connected incorrectly.

Issue:

Disconnect the appliance from the mains using thehousehold fuse or the circuit breaker in the fusebox.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

E

E flashes in a cooking zone display

Issue:

The control panel is very dirty, food has spilt over orthere is an object on the control panel. Wipe thecontrol panel thoroughly or remove the object.Touch the appropriate control panel. The flashingstops.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

E

E flashes in all the cooking zone indicators and asignal sounds

Issue:

The main switch was touched continuously for morethan 5 seconds or there is an object on the mainswitch. Wipe the control panel thoroughly orremove the object. Switch the hob back on.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

Er

Er display and numbers

Issue:

If an Er and numbers appear in the display, there isa fault with the electronics. Switch the hob off andon again using the household fuse or the circuitbreaker in the fuse box. Call the after-sales serviceif the display appears again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F0

An internal error was produced while the hob was working

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F1

F1 display

Issue:

A cooking zone has faulty electronics.Switch the cooktop off and, after a few minutes, onagain using the household fuse or the circuitbreaker in the fuse box (reset). Disconnect thecooktop from the electricity and call the after-salesservice if the display appears again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F2

F2 display

Issue:

The hob is too hot and has switched itself off.Remove the pans from the cooking zones. F2disappears from the display when the indicator isacknowledged (by touching any control panel) andwhen the cooking zones have cooled sufficiently.Wait a few minutes until the cooking zones havecooled down slightly. If F2 appears again after thecooking zones are switched back on, the hob is stilltoo hot. Switch off the cooking zones and allow tocool further.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F3

…

Issue:

…

Advice:

…

F4

F4 display

Issue:

The control panel is too hot and the hob hasswitched itself off. Check whether there is a hotpan on the control panel.Remove the pan from the control panel. Wait a fewminutes until the control panel has cooled downslightly. If F4 appears again after the cooking zonesare switched back on, call the after-sales service.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F5

…

Issue:

…

Advice:

…

F6

…

Issue:

…

Advice:

…

F7

F7 display

Issue:

Frying sensor faultyConfirm the error message by touching any key. Youcan continue cooking without the frying sensor function.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F8

F8 display

Issue:

A cooking zone has been in constant operation fortoo long. The holiday safeguard was activated.Switch off the cooking zone. It can be switched onagain immediately.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F9

…

Issue:

…

Advice:

…

K and 7

Alternating K and 7 display

Issue:

A cooking zone which is set on level 8 or 9 is toohot. This cooking zone is reduced to level 7. WhenK disappears you can select a higher setting again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

K

K display

Issue:

The cooktop is too hot and has switched itself off.Remove the pots from the cooking zones.K disappears from the display when the cookingzones have cooled sufficiently.Wait a few minutes until the cooking zones havecooled down slightly. If K appears again after thecooking zones are switched back on, the cooktop isstill too hot. Switch off the cooking zones and allowto cool further.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

…

The cooktop has switched itself off

Issue:

The main switch was touched accidentally. Switchthe cooktop back on.A cooking zone has been in constant operation fortoo long. The safety deactivation was activated.Switch off the cooking zone. It can be switched onagain immediately.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

o1

The power voltage is too low

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

o2 o3

The cooking zone has overheated

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

EÖ + number

Electronic system Electronic system

Issue:

Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

p + number

Electronic system Electronic system

Issue:

Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

F0 F9

There is an internal function error.

Issue:

Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

t

The electronic system has overheated and the corresponding hotplate has switched off.

Issue:

Wait until the electronic system has cooled down properly, then press any symbol on the hob. If the indication persists contact the Technical Assistance Service.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

{b

Incorrect input voltage, not within the normal working limits.

Issue:

Incorrect input voltage, not within the normal working limits. Contact the electricity distributor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

{c {d

The hotplate has overheated and switched off to protect the countertop.

Issue:

Wait until the electronic system has cooled down and then switch it on again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

"§ + number

Electronic system malfunction.

Issue:

Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

š + number

Electronic system malfunction.

Issue:

Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

¡ + number

Electronic system malfunction.

Issue:

Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

"‹ / "Š

There is an internal error in the operation.

Issue:

Unplug the hob from the mains. Wait about 30 seconds beforeplugging it in again. *

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

•

The electronic system has overheatedand the corresponding hotplate hasbeen switched off.

Issue:

Wait until the electronic system has cooled down completely.Then push any symbol on the hob.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

"...

The electronic system has overheatedand all hotplates have been switched off.

Issue:

Wait until the electronic system has cooled down completely.Then push any symbol on the hob.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.

—‚

Supply voltage outside normal operatinglimits.

Issue:

Please contact your local electricity company.

Advice:

—ƒ / —„

The hotplate has overheated and hasswitched off in order to protect its cooking surface.

Issue:

Wait until the electronic system has cooled down sufficientlybefore switching it back on

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.