North London Appliance Repairs Domestic Appliance Repairs & Sales London 
North London Appliances
Book a Repair
0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
How are suction tests performed?
Section tests are done by checking the outflow of air in the upper part of the hood by simply removing the tube, leaving the vent open, and turning on the hood. If air comes out, the hood works, so a decline in performance has to be found by investigating any problems with the installation.
Arrange a visit from a Cooker Hood engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
What should I do if my hood has no suction?
The first thing you need to know is whether your hood is ducted or recirculating. If it is recirculating, the hood scrubs out the odors that are produced by cooking, while most of the vapors are returned to the room. If the hood is ducted, both odors and vapors are expelled outside your home.
The following conditions are required for the hood to function correctly:
- The diameter of the outlet duct should never neck down more than 20% from the original diameter.
- The ducts must have the fewest possible curves.
- Avoid reduced - length ducting if possible.
- If the conduit terminates in the wall and not the roof, a mesh screen must be positioned over its outlet. Avoid using a decorative grill with fixed slats, which can reduce performance by up to 50%.
Arrange a visit from a Cooker Hood engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
A light is flashing. Do I need to call support?
Most Elica products feature a system that alerts users when the filters are saturated (40 hours of use for grease filters, and 160 hours of use for carbon filters). When the alert is on (the LED is flashing), the filters need to be cleaned and reset as described in the instruction manual. If you clean the filters but don't reset the alert, the button panel will continue to flash the LED. When this happens, check the instruction booklet to perform the reset.
Arrange a visit from a Cooker Hood engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
This set of fault codes for some ranges of Siemens built in ovens and may also cover some cooker models.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
Er1
Temperature sensor failure
- Issue:
- Check temperature sensor wiring
Check temperature sensor
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Oven Repairs in London.
Er2
Faulty mains connecction
- Issue:
- Check connection to mains supply
Check mains supply is good and within normal operating range
Check mains terminal connection block
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Oven Repairs in London.
Er4
Temperature sensor failure
- Issue:
- See Er1
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Oven Repairs in London.
Er6
Door lock defective
- Issue:
- Check door lock (generally only fitrted in pyrolitic oven models)
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Oven Repairs in London.
Er7
Door release mechanism faulty
- Issue:
- See Er6
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Bosch Oven Error codes
These error code explanations can help you diagnose a problem with your Bosch Oven.
This set of fault codes for some ranges of Bosch built in ovens and may also cover some cooker models.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
Er1
Temperature sensor failure
- Issue:
- Check temperature sensor wiring
Check temperature sensor
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Oven Repairs in London.
Er2
Faulty mains connecction
- Issue:
- Check connection to mains supply
Check mains supply is good and within normal operating range
Check mains terminal connection block
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Oven Repairs in London.
Er4
Temperature sensor failure
- Issue:
- See Er1
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Oven Repairs in London.
Er6
Door lock defective
- Issue:
- Check door lock (generally only fitrted in pyrolitic oven models)
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Oven Repairs in London.
Er7
Door release mechanism faulty
- Issue:
- See Er6
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Oven Repairs in London.
F32
Temperature sensor failure
- Issue:
- Lower oven temperature sensor failure; An open or short circuit in the lower oven sensor wiring
- Advice:
- Check all connections, especially P24 on the power board.
- Unplug the sensor connector and check sensor resistance (approximately 1080 ohms at room temperature with connector remove). Remember to reconnect it.
- Check that neither sensor wire is open or pinched to the appliance chassis.
- Check that the solder joints in header P24 on the power board are not broken.
- If sensor is OK, replace power board.
F41
Defective latch motor or its wiring
- Issue:
- Upper (or single) oven motorised latch will not lock; defective or jammed upper (or single) oven door or latch switches; Defective latch motor or its wiring.
- Advice:
- Check P24 connector on the power board.
- Ensure door latch switches are operating properly.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
- Check that the solder joints in header P24 on the power board are not broken.
- Check P10 connector and check if latch motor wire is pinched to the appliance chassis.
F42
Defective or jammed lower oven door or latch switches
- Issue:
- Lower motorised latch will not lock; Defective or jammed lower oven door or latch switches; Defective latch motor or its wiring.
- Advice:
- Check P24 connector on the power board.
- Ensure door latch switches are operating properly.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
- Check P10 connector and check if latch motor wire pinched to the appliance chassis.
- If F42 persists, replace power board.
F43
Defective latch motor or its wiring
- Issue:
- Upper (or single) oven motorised latch will not unlock; Defective or jammed upper oven door or latch switches; Defective latch motor or its wiring.
- Advice:
- Check P24 connector on the power board.
- Ensure door latch switches are operating properly.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
- Check P10 connector and check if latch motor wire is pinched to the appliance chassis.
- If F43 persists, replace power board
F44
Defective latch motor or its wiring
- Issue:
- Lower motorised latch will not unlock; Defective or jammed lower oven door or latch switches; Defective latch motor or its wiring.
- Advice:
- Check P24 connector on the power board.
- Ensure door latch switches are operating properly.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
- Check P10 connector and check if latch motor wire is pinched to the appliance chassis.
F45
Defective or jammed upper oven door or latch switches
- Issue:
- Upper (or single) oven latch both locked and unlocked; Defective or jammed upper oven door or latch switches
- Advice:
- Check P4 connector on the power board.
- Ensure door latch switches are operating properly.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
- Check that neither latch switch nor common wires are pinched to the appliance chassis.
Arrange a visit from an Oven engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
This set of fault codes for some ranges of Neff built in ovens and may also cover some cooker models.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
Er1
Temperature sensor failure
- Issue:
- Check temperature sensor wiring
Check temperature sensor
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Neff Oven Repairs in London.
Er2
Faulty mains connecction
- Issue:
- Check connection to mains supply
Check mains supply is good and within normal operating range
Check mains terminal connection block
Check control module - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Neff Oven Repairs in London.
Er4
Temperature sensor failure
- Issue:
- See Er1
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Neff Oven Repairs in London.
Er6
Door lock defective
- Issue:
- Check door lock (generally only fitrted in pyrolitic oven models)
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Neff Oven Repairs in London.
Er7
Door release mechanism faulty
- Issue:
- See Er6
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Neff Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
F0
Stuck touch pad
- Issue:
- Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced
If this fault code cannot be cancelled, replace the oven control, touch pad, or both - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F1
Stuck touch pad
- Issue:
- Usually means that either the touch pad or the oven control is defective and needs to be replaced
If this fault code cannot be cancelled, replace the oven control, touch pad, or both - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F2
Overheating detected during baking
- Issue:
- If actual over temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace oven control
If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit
Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective
Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature. - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F2
Overheating detected during cleaning cycle
- Issue:
- If actual over temperature condition occurred: Look for welded relay contacts. If this happens, replace oven control
If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit
Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.
Check door lock switches
Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature. - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F3
Shorted or open circuit oven temperature sensor
- Issue:
- Check sensor harness and harness connection between oven sensor and oven control
Replace oven temperature sensor if wiring is ok - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F4
Shorted or open circuit oven temperature sensor
- Issue:
- Check sensor harness and harness connection between oven sensor and oven control
Replace oven temperature sensor if wiring is ok - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F7
Stuck touch pad or faulty clock
- Issue:
- Usually means that either the touch pad or the oven control is defective and needs to be replaced
If this fault code cannot be cancelled, replace the oven control, touch pad, or both. - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
F9
Lock switch fault detected
- Issue:
- Check wiring to door lock switch; the wire harness may be connected wrong
Check for stuck lock switch - Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
ER01
Faulty communications between the electronic control modules
- Issue:
- Check connections between the control modules - Check connector blocks for visible damage, arcing or burning
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER02
Faulty program selector switch
- Issue:
- Check oven function switch - Replace if damaged
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER03
Faulty program selector switch
- Issue:
- Check oven function switch - Replace if damaged
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER04
NTC sensor on the main control board registers as open circuit
- Issue:
- Check wiring to NTC - Check NTC
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER05
NTC sensor on the main control board registers as short circuit
- Issue:
- Check wiring to NTC - Check NTC
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER06
Main motherboard temperature exceeds 85˚C
- Issue:
- Check reason for overheat detection
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER07
Food probe temperature NTC detected as open circuit
- Issue:
- Check food probe - Check connector - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER08
Food probe temperature NTC detected as short circuit
- Issue:
- Check food probe - Check connector - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER09
Food probe temperature NTC detected as exceeded 85˚C
- Issue:
- Check food probe - Check connector - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER10
Oven temperature probe NTC detected as open circuit
- Issue:
- Check oven NTC - Check connectors - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER11
Oven temperature probe NTC detected as short circuit
- Issue:
- Check oven NTC - Check connectors - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER12
Oven case temperature exceeded 300˚C
- Issue:
- Check reason for overheat
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER13
Set temperature not reached in 105 minutes
- Issue:
- Check oven for heating function - Check heating elements
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER14
Mechanical oven timer reads as open circuit
- Issue:
- Check oven timer
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER15
Door sensor reads as open circuit
- Issue:
- Check oven door closure and operation - Check oven door switches - Check connectors - Check wiring
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER16
Display board temperature probe NTC detected as open circuit
- Issue:
- Check oven display board NTC - Check connectors - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER17
Display board temperature probe NTC detected as short circuit
- Issue:
- Check oven display board NTC - Check connectors - Check wiring to main control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER18
Display board temperature exceeds 75˚C
- Issue:
- Check reason for overheat detection
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER19
Malfunction of EEPROM on main control board
- Issue:
- Replace control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
ER20
Software error on cooking recipe
- Issue:
- Restart oven - Check control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hoover Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
F1
Ambient temperature exceeds 85˚C
- Issue:
- Ambient temperature exceeds 85˚C
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F2
Oven cavity temperature too high during pyrolytic cleaning cycle
- Issue:
- Oven cavity temperature too high during pyrolytic cleaning cycle
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F3
Oven cavity temperature has exceeded 305˚C
- Issue:
- Oven cavity temperature has exceeded 305˚C
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F4
Power module failure
- Issue:
- Power module failure
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F5
Communications error between oven clock and oven power module
- Issue:
- Communications error between oven clock and oven power module
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F7
Oven door lock fault detected
- Issue:
- Oven door lock fault detected
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
A1
CCU did not reset
- Issue:
- CCU did not reset
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
C1
Oven temperature exceeds 305˚C
- Issue:
- Oven temperature exceeds 305˚C
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F1
Ambient (room) temperature exceeds 85˚C
- Issue:
- Ambient (room) temperature exceeds 85˚C
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F2
Meat probe temperature has exceeded 110˚C
- Issue:
- Meat probe temperature has exceeded 110˚C
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F4
Shorted or open circuit ambient temperature sensor
- Issue:
- Shorted or open circuit ambient temperature sensor
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F5
Short circuit oven temperature sensor
- Issue:
- Short circuit oven temperature sensor
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
F7
Meat probe sensor is short circuited
- Issue:
- Meat probe sensor is short circuited
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Electrolux Built In Oven Error codes
These error code explanations can help you diagnose a problem with your Electrolux Built In Oven.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
F0
No alarm signal
- Issue:
- Replace main electronic controller
- Advice:
F1
Door will not lock
- Issue:
- Check door lock
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
F2
Door will not unlock
- Issue:
- Check door lock mechanism
- Check control thermostat
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
F3
Self test error
- Issue:
- Disconnect oven from mains power
- Wait five minutes with no mains connected
- Reconnect oven and restart
- Advice:
- If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.
F4
Shorted or open circuit oven temperature sensor
- Issue:
- Check sensor harness and harness connection between oven sensor and oven control
- Replace oven temperature sensor if wiring is ok
- Advice:
- If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.
F5
Relay contacts detected as sticking
- Issue:
- Replace main electronic control board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
F7
Incorrect mains supply polarity
- Issue:
- Check mains connection is correct
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
F8
Power supply problem to interface
- Issue:
- Check wiring and connectors
- Replace main electronic control PCB
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
F9
Processor is auto resetting
- Issue:
- Disconnect oven from mains power
- Wait five minutes with no mains connected
- Reconnect oven and restart
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Oven Repairs in London.
Arrange a visit from an Oven engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.