Code 01

Check water dispenser

Issue:

Water dispenser not working - Check the water fill valve connections then the water valve itself and if both are okay it's probably the main control board that's at fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 02

Check damper and triac for damper

Issue:

Air damper stuck or doesn't connect - The air damper is a motorised baffle unit that allows cold air to be drawn from the freezer into the fridge. It will either be this one or look very similar but there are a few of these used across the range of Whirlpool US fridge freezers so it may be worth checking with the 12NC number to make sure you get the correct one. If the connections are okay and the damper tests fine it will likely be the main control board that is faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 03

Check condenser fan

Issue:

Evaporator or condenser fan not working or detected - Check all connections to the fan motors and check the fans, if faulty, replace. If the connections and fans are okay it will likely again be a control board faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 04

Check condenser fan

Issue:

Evaporator or condenser fan not working or detected

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 05

Check freezer sensor

Issue:

Temperature sensors cannot be read - Check all connections and sensors are operating correctly. The sensor that does give trouble, often along with the main control PCB at the same time, is this one, the freezer defrost thermostat. Again, please do check that this fits to your particular model as there are a few different ones used but that's the most popular one by a long way. If all connections are good and sensors are okay then the main control board is possibly faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 06

Check fridge sensor

Issue:

Temperature sensors in fridge section cannot be read

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 07

Check defrost heater

Issue:

Defrost heater not working or detected - This can be the defrost heater itself, the wiring or the main board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Code 08

Main control board is faulty.

Issue:

Main control board is faulty. Triac Q3 on main control PCB damaged, damper running continuously

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

d

Air damper stuck or doesn't connect

Issue:

The air damper is a motorised baffle unit that allows cold air to be drawn from the freezer into the fridge. It will either be this one or look very similar but there are a few of these used across the range of Whirlpool US fridge freezers so it may be worth checking with the 12NC number to make sure you get the correct one.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

C

Fridge sensor failure

Issue:

The fridge sensor rarely gives trouble in these models and, to date, we've not had to use one.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

C

Freezer sensor failure

Issue:

This is slightly different. The sensor that does give trouble, often along with the main control PCB at the same time, is this one, the freezer defrost thermostat. Again, please do check that this fits to your particular model as there are a few different ones used but that's the most popular one by a long way.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

CF

Communication error between main control board and user board

Issue:

This can be the wiring but, usually, it's one of the two PCBs that have failed, usually the main rear one.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

--

Temperature inside the freezer is greater than -11˚C

Issue:

Multiple causes for this error code. Usually however it will be a fault with the evaporator fan, compressor fan or the compressor itself.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

- 7

Black out over temperature - alarm engaged

Issue:

Over voltage warning, a problem with the electrical supply. Pressing the alarm reset will clear it usually.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

d

Air damper is stuck

Issue:

Unplug the refrigerator and examine the air damper that controls air flow from the freezer compartment to the refrigerator compartment for damage. If the air damper is broken, replace it.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

C

C on the refrigerator display / Refrigerator compartment thermistor (temperature sensor) failure

Issue:

Unplug the refrigerator and reconnect the refrigerator thermistor wire harness if loose. Replace the wire harness if damaged. If the wire harness is okay, replace the refrigerator compartment thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

C

C on the freezer display / Freezer compartment thermistor failure

Issue:

Unplug the refrigerator and reconnect the freezer thermistor wire harness if loose. Replace the wire harness if damaged. If the wire harness is okay, replace the freezer compartment thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

CF

Communication failure between main control board and user interface control

Issue:

Unplug the refrigerator and check the wire harness connections on the user interface control and the main control board. Reconnect any loose wires. If the wire harness connections are okay, replace the user interface control. If the problem persists, replace the main control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

-8

18 degrees F (or -8 degrees C) temperature reading on the freezer display / Over-temperature condition

Issue:

Make sure that the refrigerator power cord is plugged into the electrical outlet securely. The over-temperature condition is often caused by a power failure . Press the freezer temperature keypad to reset the freezer temperature display once the freezer cools to its normal temperature.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

AL01

Not working temperature sensor

Issue:

Not working temperature sensor in the refrigerating chamber;

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

AL02

Faulty NTC temperature sensor

Issue:

Faulty NTC temperature sensor

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

AL03

Breakage sensor the temperature in the freezer

Issue:

Breakage sensor the temperature in the freezer

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

CF

No communication between control Board and display

Issue:

No communication between control Board and display.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Fridge Freezer Repairs in London.

Fault Code 1

Door open after program has been started

Issue:

This error code may well not show up for a minute or so after you actually go to start the washing machine but the door can be closed and the program restarted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 2

Water intake has failed

Issue:

Error after more than 10 minutes. Generally speaking this will be a failure of the water inlet valve or the water supply itself has been cut off somehow. This can be due to the water valve or supply as stated but it may also be worth checking the filters in the fill valves to ensure that they are clear.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 3

Heating time exceeds 105 minutes

Issue:

This would ordinarily indicate a fault with the water heating element or, certainly, the water heating circuit as the washing machine is indicating that it has failed to reach temperature.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 4

Takes longer than 6 minutes to drain.

Issue:

Very often you will see this error if the filter is blocked or obstructed or the drain pump is jammed or faulty. This error code can also be caused by the pressure sensor being blocked, a much discussed topic in the forums, by overfoaming from overdosing detergent or using a poor quality detergent as well as a pressure switch or sensor failure.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 5

Fault detected in motor or drive circuit

Issue:

Very often you will see this error if the carbon brushes or the motor fails. This error code can be generated by no tacho reading from the motor (the electronics cannot see the tach generator of the motor), a triac fault or short circuit or a faulty reversing relay on the control board. The washing machine will try to start the motor but after several attempts the program will be aborted with this error code which is again consider to be a "fatal error"

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 6

Unexpected heating

Issue:

This is a bit of an odd error code and not a common one to see, it indicates that the washing machine has attempted to heat at a stage in the program where it should not.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

Fault Code 7

NTC thermistor open circuit or short circuit

Issue:

Self explanatory really, either a faulty NTC or wiring. The washing machine will complete the program but will not heat.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Washing Machine Repairs in London.

F09

Fault in the heating circuit

Issue:

On the Siemens dryer, F09 indicates a fault in the heating circuit.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

F11

Fault in the control board

Issue:

Turn the machine off. Turn the dial to 6 o'clock position. Wait 2 seconds. Press and hold the low heat button. While holding, turn the dial to 7 o'clock. Wait 2 seconds. Release the button. Turn to off. Do this several times. It should erase the stored errors. Once erased, try the machine again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Siemens Tumble Dryer Repairs in London.

...

...

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Lamona Dishwasher Repairs in London.

...

...

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Lamona Washing Machine Repairs in London.

U11

The washing machine cannot drain

Issue:

The washing machine cannot drain

Advice:

• Check that filter is not blocked or obstructed
• Check drain hose is clear of any blockage or obstruction
• Check wiring to drain pump
• Check drain pump is not defective
• Check level sensor or switch
• Check wiring to level sensor

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

U12

The door is being read as being open

Issue:

The door is being read as being open

Advice:

• Check door is closed
• Check doorlatch etc.
• Check door lock
• Check wiring
• Check electronic controller

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

U13

An unbalanced load is detected in the washing machine

Issue:

An unbalanced load is detected in the washing machine

Advice:

• Check load, sort and restart spin
• Check belt if fault persists
• Check motor if fault persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

U14

Washing machine fails to fill in twenty minutes

Issue:

Washing machine fails to fill in twenty minutes

Advice:

• Check mains water pressure
• Check inlet hoses for kinks
• Check inlet filter
• Check water inlet valve
• Pressure switch fault
• Wiring fault

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

U18

Pump or drain filter detected as being not secure

Issue:

Pump or drain filter detected as being not secure

Advice:

• Check that filter is secure
• Check wiring if fault persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H01

Pressure sensor or level switch detected as out of range

Issue:

Pressure sensor or level switch detected as out of range

Advice:

• Check wiring to level sensor
• Check pressure switch is not defective
• Replace pressure sensor
• Replace main power PCB

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H04

Short circuit detected on the power relay of the main electronic control board

Issue:

Short circuit detected on the power relay of the main electronic control board

Advice:

• Check wiring
• Replace electronic control PCB

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H05

Data not being saved to the electronic controller

Issue:

Data not being saved to the electronic controller

Advice:

• Check wiring
• Replace electronic control PCB
• Check mode B in service mode

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H07

Tacho generator signal from motor irregular or out of range

Issue:

Tacho generator signal from motor irregular or out of range

Advice:

• Check wiring to motor tacho
• Check motor wiring
• Replace motor
• Replace electronic control PCB

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H09

Communication error between power and display electronic cards

Issue:

Communication error between power and display electronic cards

Advice:

• Check wiring between the electronic cards
• Check electronic controllers

After this there is no option but to replace either or both cards as it is not possible to acertain which one is faulty on these washing machines.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H17

Wash thermistor or temperature sensor detected abnormal signal or out of range

Issue:

Wash thermistor or temperature sensor detected abnormal signal or out of range

Advice:

• Check wiring to temperature sensor 
• Check temperature sensor
• Replace temperature sensor

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H18

Motor thermistor sensor detected abnormal signal or out of range

Issue:

Motor thermistor sensor detected abnormal signal or out of range

Advice:

• Check motor connections
• Replace motor

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H21

Pressure sensor detects water level increasing from water supply

Issue:

Pressure sensor detects water level increasing from water supply

Advice:

• Clean the diaphram of water inlet valve
• Check inlet valve operation
• Repalce water inlet valve

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H23

Heater relay on main control PCB detected abnormal or out of range

Issue:

Heater relay on main control PCB detected abnormal or out of range

Advice:

• Check electronic controller
• Replace main power electronic card

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H25

Motor error detected

Issue:

Motor error detected

Advice:

• Check wiring to main motor
• Replace motor
• Replace power electronic card if problem persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H27

Door lock on the washing machine will not engage with latch in place

Issue:

Door lock on the washing machine will not engage with latch in place

Advice:

• Check wiring to door lock
• Check door lock
• Replace door lock
• Replace main electronic controller if problem persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H29

Cooling fan detected as running slow, abnormal, short or open circuit

Issue:

Cooling fan detected as running slow, abnormal, short or open circuit

Advice:

• Check wiring and connector to the cooling fan
• Replace cooling fan
• Replace main electronic controller if problem persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H41

During spoin data cannot be obtained from 3D sensor

Issue:

During spoin data cannot be obtained from 3D sensor

Advice:

• Check wiring to 3D sensor
• Replace 3D sensor
• Replace main electronic controller if problem persists

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H43

Leak detected to base of the washing machine

Issue:

Leak detected to base of the washing machine

Advice:

• Check for source of the leak

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H46

Abnormal signal from leak detector in base of the washing machin

Issue:

Abnormal signal from leak detector in base of the washing machine

Advice:

• Check wiring to sensor
• Check sensor
• Replace main electronic controller is advice from Panasonic

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H51

Overloaded motor detected

Issue:

Overloaded motor detected

The washing machine has detected that the main drive motor is under stress for some reason.

Advice:

• Check main drive motor
• Check main control board

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H52

Too high input voltage detected

Issue:

Too high input voltage detected

Advice:

• Check mains electricity supply as this is caused by abnormal mains

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H53

Too low voltage input detected

Issue:

Too low voltage input detected

Advice:

• Check mains electricity supply as this is caused by abnormal mains

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

H55

Abnormal current detected while the main motor is rotating

Issue:

Abnormal current detected while the main motor is rotating

Advice:

• Replace main drive motor

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Panasonic Washing Machine Repairs in London.

...

The oven, grill or hotplate will not light.

Issue:

If you cannot hear any sparking or the sparking is slow when youpress the ignition button it may not be enough to light the cooker. You will probably need to replace the battery. You can light the burners with a match until you have time to change the battery. Check that there is not a problem with your gas supply. You can dothis by making sure that other gas appliances such as your central heating or gas fire are working. If only the hotplate burners will not light, make sure that the burnerparts have been replaced properly.

Advice:

…

…

Food is cooking too quickly or too slowly.

Issue:

Check that you are using the recommended gas marks and shelfpositions. Be prepared to adjust the gas mark up ordown to achieve the results you want.

Advice:

…

…

The oven is not cooking evenly.

Issue:

Check that the cooker is installed properly and is level. Check that you are using the recommended temperatures and shelf positions. If you are using a tin or tray which is larger than the one we recommend, be prepared to turn it round during cooking. If you are cooking a large item be prepared to turn it round during cooking.

Advice:

…

...

Why Is The Oven Not Coming On?

Issue:

Check that there is power going into the cooker by seeing if the oven light is coming on. Then check if the clock is illuminated. If the clock is flashing 'auto' or is not illuminated this will be the reason why the oven is not coming on. Refer to your User Guide for instructions on how to re-set the clock on your model. If there is no power to the clock but there is power to other areas of the appliance (the top of the cooker and oven light should be working) there may be a fault with the clock.

Advice:

...

…

What Do I Do If I Smell Gas?

Issue:

1. Do not turn electric switches on or off 2. Do not smoke 3. Do not use naked flames 4. Do turn off the gas at the meter or cylinder 5. Do open doors and windows to get rid of the gas 6. Do keep people away from the area affected

Advice:

Call your gas supplier or National Grid on 0800 111 999

…

Why Are My Hotplate Burners Not Lighting Up On My Dual Fuel/All Gas Cooker?

Issue:

Make sure that the burner parts have been replaced correctly after wiping or removing for cleaning. Check that there is not a problem with your gas supply. You can do this by making sure that other gas appliances you may have are working. Do the burners spark when you push the button? If not, verify that the power is on by checking that the clock is illuminated.

Advice:

…

…

No electricity going into my rangemaster classic 110 duel fuel

Issue:

Check your breaker panel or fuse box to see if something is tripped. If you have a breaker panel, try flipping the stove breaker off all the way even if it looks like it is still on and then turn it back on and check stove.

Advice:

If you still have no power then please arrange an engineer visit. We offer fixed price Rangemaster Range Cookers Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

…

Cooker makes popping noise when off

Issue:

It's possible you have a slow leak through one of the rail cocks ( gas taps) lift off the top and spray lightly some soapy water on the end of each of the rail cocks if it bubbles you have found the leak.

Advice:

…

…

Flame on main hob of range master 110 is yellow and smelly also black sooty deposit left on jets

Issue:

Ream out all the orifices and air venturi holes on the burner, adjust the air-shutter, the air-shutter is usually nearer the valve/knob than to the burner. Yellow flame is an imbalance of fuel to oxygen and is creating Carbon Monoxide and not burning cleanly... this is the same problem that can make a furnace deadly. Blue flame = neutral flame.

Advice:

…

…

Rangemaster 110 main oven does not work

Issue:

That looks like a problem with the control panel assembly. Try first unplugging power cord for ten minutes, then plug back. Press the selector wheel for 5 seconds and see if this reset it. If that does not work , then you need to replace the control assembly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rangemaster Range Cookers Repairs in London.

0 0. 0

Clock timer is on auto and flashing 0 0. 0

Issue:

Try turning the power off and leaving it off to the oven for 15 minutes or so. Turn the power back on and see if you can reset the clock.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rangemaster Range Cookers Repairs in London.

…

Stop gas burner on rangemaster from cutting out

Issue:

Try removing the burners and soaking in hot soapy water. If this doesnt work, an old trick is to burn the dirt out. Put the burner in the oven and bake it. The heat will soften any dirt and then washing the burner in hot soapy water usually removes the build up. Try poking a needle into the holes to clear them.

Advice:

…

…

The hot warning light on my rangemaster110 warming plate has stopped working but the warming plate still works fine

Issue:

Two possibilities, either the bulb has failed, or the temperature sensor in the top has failed. Neither is likely to be an easy or cheap replacement.

Advice:

…

…

Flame keeps going out on ring

Issue:

Clean all of the holes the flames come ut f with a small brush t culd be clogged also lift range hod and look under it by the lines see that nothing is loose or obstructing the gas line.

Advice:

…

…

No power to main oven or either oven light - Rangemaster Professional 90 SS (electric) Kitchen Range

Issue:

Check your main panel for 240volts and again at plug in on unit,unless you have some power i.e. 120volts, you need 240volts to operate oven, also check neutral on supply line into oven/lights,thats open nothing will operate

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rangemaster Range Cookers Repairs in London.

…

Rangemaster 110 oven heats by itself

Issue:

That happens either because the timer control is faulty, or because there is a contact on the element wires or connectors, and the element is grounded. Control board and wiring harness are tested using a multimeter.

Advice:

…

…

The temperature inside the freezer is too low, with the fresh food temperatures ne.

Issue:

The temperature inside the freezer section is set too low.

Advice:

Set the temperature in the freezer slightly higher then wait 24 hours for new balance to be achieved

…

The temperature inside the fresh food compartment is too cold, while the freezer sections are ne.

Issue:

The temperature inside the fresh food area is set too low.

Advice:

Set the temperature inside the fresh food section slightly warmer. The temperatures will reach new balance within 24 hours.

…

The foods stored in the full width pantry are frozen

Issue:

The control setting in the fresh food area is set too cold.

Advice:

Set the fresh food control setting slightly higher. The new set point temperature will reach a balance within 24 hours

…

The foods stored in the crisper are frozen

Issue:

The settings for the fresh food compartment are too cold.

Advice:

Raising the fresh food control settings to a slightly higher temperature and/or lowering the humidity control setting will prevent frost or ice forming.

…

Readings on the dispenser display are showing error codes

Issue:

An electronic operating problem has been encountered.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rangemaster Fridge Freezer Repairs in London.

…

The freezer drawer sections or fresh food compartment temperatures are too high.

Issue:

The doors or drawers are open frequently or for too long each time. The doors or drawers are left open. The condenser is dirty.

Advice:

Try to reduce frequency of opening doors and drawers. Take extra care to keep gaskets sealing well around the perimeter of the doors. Keep gaskets clean and dirt free. Periodically clean the condenser coil with a vacuum cleaner attachment. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rangemaster Fridge Freezer Repairs in London.

…

The temperature is too warm in the freezer but okay in the fresh food section

Issue:

The temperature setting in the freezer is set too warm.

Advice:

Set the temperature colder for the freezer section. Then allow it to balance within 24 hours at new colder temperature.

…

The temperature is too warm in the fresh food section but okay in the freezer.

Issue:

The temperature setting in the fresh food section is set too warm.

Advice:

Set the food temperature control slightly colder. The new colder temperature can be achieved within 24 hours.

…

The temperature inside the crisper is too warm.

Issue:

The fresh food set temperature is too warm.

Advice:

Set the fresh food temperature colder and the balance to colder temperature will be achieved within 24 hours

…

Moisture formation on the inside of the fridge.

Issue:

It is in a hot or humid environment. The door or drawer is left open. The door or drawer is opened too frequently or for too long each time. Food containers or liquids are left open.

Advice:

Try raising the temperature slightly in the aected compartment. Check to make sure the door gaskets are clean and sealing well against the metal cabinet frame. Reduce the frequency of door openings. Let hot foods cool to room temperature and cover foods and liquids.

…

Water droplets collect in the lower crisper drawer areas.

Issue:

Humidity settings are set too high.

Advice:

It is normal for some wet air to collect inside the enclosed crisper. To reduce the accumulation of moisture, lower the humidity setting and/or raise the fresh food compartment temperature.

…

Water forms at underside of the crisper glass covers.

Issue:

Moisture given o from wet foods. Door seal leaks or frequent door openings in humid environment.

Advice:

When placing foods in the fridge rst pat them with a dry cloth to remove excess moisture. Check the door gaskets and reduce door openings. Possibly raise fresh food temperature.

…

Wet air forms droplets of water on the outside edges of the fridge.

Issue:

Warm, humid air in the environment mixes with cooler air at the door gasket areas of the fresh food and freezer compartments causing condensation.

Advice:

A small amount of dew or water moisture is normal. It is best to wipe it down with a dry cloth to improve performance. A slight increase in the compartment temperatures can reduce this moisture formation. Check door gasket for proper seal and clean.

…

The ice maker has stopped making ice

Issue:

The ice cube height sensor arm has detected a full tray condition. The water supply valve is closed. The freezer section is not cold enough. The water source saddle valve is somehow blocked.

Advice:

To make more ice cubes you may distribute your ice to the center drawer right side (or lower drawer) to increase ice cube harvest. Turn on the water supply valve. Adjust the setting to the freezer to colder setting and allow it to balance within 24 hours. Check the water supply saddle valve for obstruction and replace it if damaged.

…

The ice making capacity is low.

Issue:

The freezer drawer area is not cold enough. The water supply valve is not at a high enough pressure or not open all the way. The ice maker sensor arm is restricted or out of position.

Advice:

Set the freezer drawer to a colder setting. 1.7–8.4 bar (25–121 psi) and add water booster if too low. Make sure the water valve supply is open all the way. Make sure the water lter is distributing enough water and is not clogged. Make sure the drawer gaskets are sealing and kept clean from dirt or debris.

…

The ice maker runs continuously.

Issue:

The ice maker level sensor is stuck in the down position.

Advice:

Check the movement of the ice maker sensor arm so it rests in the ‘up’ position. Make sure that no frozen packs or objects are obstructing the ice maker sensor arm.

…

The ice cubes have a bad odour

Issue:

Uncovered, unwrapped, foods are stored near the ice cube container. The water lter has approached the end of its useful life. The ice cubes have been set for too long a period of time.

Advice:

Cover, wrap, and position frozen foods away from the ice cube container. Check and replace the water lter. Dump out the stale ice cubes.

…

Cold water not dispensing.

Issue:

The water supply pipe is not open. The water lter is blocked. The water line is blocked.

Advice:

Open the water supply line all the way. Replace the water lter. Check that the water tubes are not kinked or restricted.

…

The water has a strange odour

Issue:

The water has been stored too long without use. The local potable water source is suspect.

Advice:

Remove 10–12 cups of water and throw away. Check if the odour improves. Contact your local water supply company to check quality of the water.

…

The water supply pressure is too low.

Issue:

Water pressure level is below specication minimum of 25 psi (1.7 bar).

Advice:

Contact local plumbing supply dealer to install a water booster to obtain 1.7–8.4 bar (25–121 psi) water pressure rating

…

The inside of the fridge is dirty

Issue:

The inside walls, shelves, and door bins need cleaning. The foods in the fridge have been stored beyond their useful life.

Advice:

Clean all inside surfaces with warm water and a clean soft damp cloth then wipe dry. Wrap and cover foods to extend useful food life.

…

The door has a closing problem.

Issue:

The door may have food articles or packages that are obstructing closure. The level of the refrigerator is causing the door to shift out of position. The door could be hitting against adjacent cabinets or appliances. The door hinge alignment may require adjustment.

Advice:

Reposition the shelves, door bins, or internal containers to allow the door to close. Ensure the oor is level using sturdy materials that are also non ammable. Provide a good 25 mm (1”) clearance on all 3 sides and on top of the cabinet so doors can open and close freely. Adjust hinges and add spacer clips supplied.

…

The drawers are hard to move in or out, or will not close.

Issue:

The stored foods are interfering with the slide mechanism. The drawer slides are dirty from food particles.

Advice:

Position the foods away from the drawer sides and spread out the foods evenly within the drawers. Clean the drawer and wipe down the slides periodically so the slide ball bearings move freely

…

The compressor does not work.

Issue:

The refrigerator is in deep freeze cooling. The refrigerator is not powered on.

Advice:

This is normal for a refrigerator that goes into deep freeze automatically. The period of deep freeze cooling lasts about 30 minutes. Make sure the plug is inserted all the way into the power outlet. Has the circuit breaker tripped? Check and change to a new 13 A fuse and/or reset the circuit breaker. Check the electrical supply to the room. Call the local electricity company.

…

The fridge operates frequently or operates for a long time.

Issue:

The room temperature or ambient temperature is high. The ice maker is in operation. The doors or drawers are frequently opened and closed. The control settings in the freezer and fresh food compartments are set to cold level. Door and/or drawer gasket seals may be dirty, frayed or cracked. The condenser is dirty.

Advice:

It is normal for the fridge to operate continuously. This is normal – the ice maker adds extra work load in the refrigerator. Try to reduce frequency of door or drawer openings. Raise up the compartment temperatures slightly and allow 24 hours to reach new balance. Clean o the gaskets and/or heat slightly with hair dryer so gasket takes contour of metal frame. Clean the condenser

…

The compressor frequently cycles on and off.

Issue:

The compartment temperature sensors keep the fridge at the set points causing the compressor to cycle.

Advice:

This is normal. The fridge compressor will provide the required cooling level.

…

A beeping noise from inside the fridge.

Issue:

One door or drawer of the fridge is open for over 60 seconds.

Advice:

This is normal and will repeat every 1 minute until the door or drawer is closed.

...

If the oven is not working

Issue:

You should check that the oven is properly plugged into the power supply.

Advice:

…

…

Gas input is abnormal

Issue:

Check the following: Are the holes of the burner clogged? Is the pressure regulator working properly? If you are using a pipe, is there any gas in the pipe? Is the valve open?

Advice:

If you detect something abnormal with the gas valves, contact a qualified electrician or an authorised service centre for assistance.

…

There is a smell of gas where the appliance is placed

Issue:

Please check the following: Has a gas valve been left open? Is the gas pipe in the correct position and in good condition?

Advice:

…

…

The oven does not heat up

Issue:

Are the oven control knobs at the correct position?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rosières Range Cooker Repairs in London.

…

The cooking time is too long

Issue:

Has the correct temperature been selected?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Rosières Range Cooker Repairs in London.

…

Smoke comes from the oven

Issue:

It is advisable to clean the oven after each use. If fat which splashes during the cooking of meat is not cleaned, it will cause an unpleasant smell and smoke the next time you use the oven.

Advice:

…

…

The oven light does not come on

Issue:

The light might be faulty.

Advice:

…

…

The display is not showing!

Issue:

Check if: The time indication has been switched off.

Advice:

…

…

Nothing happens when I press the keys!

Issue:

Check if: The Safety Block is active.

Advice:

…

…

The oven does not work!

Issue:

Check if: The plug is correctly fitted in the socket.- The oven‟s power is switched on.

Advice:

…

…

When the oven is operating I can hear somestrange noises!

Issue:

This is not a problem. It has to do with the operating noises that canoccur during the cooking process, e.g, by thewater pumps in the steam generator. The steam inside the cavity produces apressure build-up and sometimes the cavitywalls may produce noise when they react to thepressure. This noises are normal, there is no problem.

Advice:

…

…

The food doesn't heat up or heats very slowly!

Issue:

Check if: You have selected the correct operating timesand temperature setting. The food you have put inside the oven is alarger amount or colder than you usually put in.

Advice:

If the message "Err_" appears in thedisplay, please contact the Customer Care.

…

The appliance still makes a noise after thecooking process is finished!

Issue:

This is not aproblem. The cooling fan keeps on working for sometime. When the temperature has dropped sufficiently, the fan will switch itself of.

Advice:

…

…

The oven switches on but the interior lightdoes not go on!

Issue:

If all the functions work properly it is probablethat the lamp has blown. You can keep onusing the oven.

Advice:

…