F8

F8 is a problem concerning the water level.

Issue:

• Check your filters arent blocked and that you arent using 3 or 4 in 1 tablets in conjunction with rinse aid as this will result in excess foaming.
• A faulty recirculation pump or blockage within is a possibility.
• Faulty water indicator also a factor.

Advice:

F8 code means that dishwasher has not emptied out fully. Open the door, empty water manually, clear the filters and the drains. Close the door and then hold the start button, until it will restart. We offer fixed price Bauknecht Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

…

My Bauknecht dishwasher will not switch on.

Issue:

First of all check that the door is properly closed. Be ensure that the cable is correctly plugged into the mains. Fuse?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Dishwasher Repairs in London.

FA

The Water is leaking from the device.

Issue:

A possible reason is that in the base pan of water is. It does not matter why there is water. The error appears because there is water, without giving information on the exact cause. The error can also occur when the switch is jammed for some reason or because it is stored in the electronics, although the reason is eliminated long ago. For a possible cause of research, it is good if you are aware of other messages. F2 means that the water stop was triggered, which indicates an error in the inlet hose, F4 indicates a problem down the sewer.

Advice:

• In the event that the error is only accidentally created and saved, you should press the START button until the display goes out. Close the door of Bauknecht freshener. Now the machine drains and is ready for the restart. When the error was triggered accidentally, it may be sufficient to allow the dishwasher goes again.
• If this is not enough, you can try to remove by tilting the device, the water from the bottom tray. Sometimes you need to remove them in order to empty it. Thereafter, the Bauknecht dishwasher would start up again without re-display FA. If it was just a one-time event, which has led to the accumulation of water, the device is now in order.
• If you find that the well is dry, but the display still appears, then it means either the Styrofoam under the switch or the switch is stuck. Maybe it has to be replaced.
• Quite often, the problem is a clogged drain. The pump can not squeeze out the water against the resistance. Test whether the dishwasher is running properly when the water is collected in a trough. If so, it is at the issue.
• Make sure when the next wash cycles on whether there are indications regarding the water stops or that the indicator of problems appear when pumping. Possible causes of water in the bottom pan may arise or when it is bent by leaks in the drain hose. Look out for these signs. If the display FA appears again, there must be a trigger that causes repeatedly accumulated water in the bottom pan. It could even be that the machine itself is leaking. If you no simple trigger, such as finding a dripping drain hose, you must consult a professional.

F6

F6 is listed as a filling fault.

Issue:

• Water tap closed
• Water inlet hose blocked
• Water inlet valve defective
• Flow meter defective

Advice:

The flow meter is a part within the metering tank on the left side of the appliance. (Large plastic tank). If the machine is taking in water, try unplugging the 2 wire connection on the tank and plugging it back on a few times to clean the connection up. If it's not taking in water, test that water actually comes through the hose. If it does, test the inlet valve is ok and that it's being supplied with power. The only other parts involved are wiring and the control. If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F4

F4 points at at a drain problem

Issue:

F4 points at at a drain problem, often the problem is caused by a dirty or defective pressure switch. Before replacing the pressure switch it is necessary to test the drain system.

Advice:

First try turning power off from circuit breaker for few minutes and see if that is enough to clear the error code. Turn power off from circuit breaker (or disconnect power cord) and clean the drain well inside the tub. Remove any water present in the tum. Check also the drain hose at the back of the appliance and make sure it is not kinked or blocked. If that does not work remove the kick panel at the base of the dishwasher, locate the pressure switch and clean the hose connected to the pressure switch. The pressure switch is the device that detects water level, determining when to start and stop the drain pump. The pressure switch is a small plastic switch connected to a long rubber hose. If the hose gets blocked with detergent or if the switch is defective you get F4.
Resuming:

• Try resetting the appliance to clear the error code.
• If that does not work clean and check the drain system.
• If still no luck check the pressure switch.
• Disconnect power before doing any maintenance.

If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

...

The appliance is not working

Issue:

• Is there an electricity supply?
• Is the plug properly inserted in the mainssocket?
• Is the appliance switched on?
• Has the fuse blown?
• Is the power cord in perfect condition?

Advice:

If the problem persists, please arrange an engineer visit. We offer fixed price Bauknecht Fridge Freezer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

…

Temperature inside the compartments isnot low enough

Issue:

• Are the doors closed properly?
• Is the appliance installed next to a heatsource?
• Are the air circulation vents blocked?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Fridge Freezer Repairs in London.

…

Water collects at bottom of refrigerator compartment.

Issue:

Is the defrost water drain blocked?

Advice:

…

…

Excessive frost build-up in the freezer compartment.

Issue:

• Is the door shut properly?
• Is food obstructing proper door closure?

Advice:

…

…

The appliance is excessively noisy

Issue:

• Has the appliance been installed correctly?
• Are the pipes at the back touching or vibrating?

Advice:

…

…

Excessive frost build-up in the low temperature compartment.

Issue:

• Is the door closed properly?
• Does the food stored inside obstruct proper closing of the door?

Advice:

…

…

Temperature is not low enough

Issue:

• Are the doors closed properly?
• Is the appliance installed next to a heatsource?
• Is the thermostat setting correct?
• Are the air circulation grilles blocked?

Advice:

…

…

Temperature is too low

Issue:

Is the thermostat setting correct?

Advice:

…

Red LED

Red LED on freezer control panel remainslit / acoustic alarm sounds.

Issue:

• Have you just loaded a large quantity offresh food?
• Freezer door properly closed?

Advice:

…

…

Drying takes too long /laundry is not dry enough

Issue:

• Was the correct programme selected?
• Was the inserted laundry toowet (Washing machine spinspeed less than 800 rpm)?
• Is the lint filter dirty (filterindicator lamp on)?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Tumble Dryer Repairs in London.

…

The dryer does not operate

Issue:

• Is the plug properly insertedinto the mains electricity socket?
• Is there a power failure?
• Has the fuse blown?
• Is the door well closed?
• Has the programme beenselected?
• Has the start delay optionbeen selected?
• Has the Start/Pause buttonbeen pressed?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Tumble Dryer Repairs in London.

…

Lint filter indicator lamp on

Issue:

• Is the lint filter clean?
• Is the vent hose blocked?

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Tumble Dryer Repairs in London.

F6

Drive Motor Tachometer Error

Issue:

The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes. Potential Causes

• Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU)
• Check the Drive Motor
• Check the MCU
• Check the Wire Harness

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

F11

F11 this is a motor fault..

Issue:

Check the carbon brushes and replace if need be. Clean the copper contacts where the carbon has built up.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

F7

Drain Filter Problem

Issue:

The F7 on our model means that you have something in the Drain Filter or your water pressure is Low. So check the Bottom Front R/H Filter and check also the Inlet Filters which are at the back of the machine. One is with the water Tap & the other is in the water Valve.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

F07

Motor Fault

Issue:

Motor brushes defective.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

F06

F 06

Issue:

The fault is caused by a defective motor system.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

F13

The fault F13 is displayed if there is an error in the Wassereinspülung or in the water distribution.

Issue:

By this is meant that the machine does not detect in which of the detergent chambers is flushed the water. So you can not ensure that the water is directed into the chamber are filled in according to the program detergent or fabric softener. For this reason, the machine stops the cycle.

Advice:

In general, the Bauknecht on when errors F13 into a position in which the door of the washing machine is locked. You therefore can not get your laundry. In most cases, you can trick the washing machine to remove at least the laundry.

• Resetting the machine if necessary. Now set the "Drain" program a. Since in this program do not Wassereinspülung occurs, the machine stops in the middle of the case, not the program. Do you also then "pumped" if only dry laundry in the machine.
• Now the Bauknecht will begin to pump water out of the machine. You measure the water level. If after this measurement is no water in the machine, it will stop the pump. In the case that only dry laundry is in it, it will pump very short.
• Now you have to wait a little until the safety circuit will release the door lock. This circuit is designed to prevent one engages in a trailing drum. It is a time delay before you can open the door. This delay always takes place when the door was locked times, even if the machine is not used.

The actual error you can only fix if you are familiar with the repair of washing machines. You must remove the cover and first check that all cables are in place. In general, the water distributor must be replaced.

...

The washing machine will not start, no indicator lamps are on.

Issue:

Check whether:

• the mains plug is inserted into the socket;
• the wall socket is functioning correctly (use a table lamp or similar appliance to test it).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

"Start/Pause"

The washing machine will not start... and the "Start/Pause" indicator lamp flashes.

Issue:

Check whether:

• the door is properly closed (child safety);
• the "Start/Pause" button has been pressed;
• the "Water tap closed" indication lights up. Open the water tap and press the "Start/Pause" button.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

…

The appliance stops during the programme

Issue:

(varies depending on model) Check whether:

• the "Anticrease" lamp lights up; terminate this option by pressing the "Start/Pause" button or by choosing and starting the "Drain" programme;
• another programme has been selected and the "Start/Pause" indicator lamp is flashing. Reselect the desired programme and press the "Start/Pause" button.
• the door has been opened and the "Start/Pause" indicator lamp is flashing. Close the door and press the "Start/Pause" button again.
• the washing machineís safety system has been activated (see "Fault description table").

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

…

Residue from detergent and additives left in the detergent drawer at end of wash.

Issue:

Check whether:

• the cover grid of the softener chamber and the separator of the main wash chamber are correctly installed in the detergent dispenser and all parts are clean (see "Care And Maintenance");
• sufficient water is entering. The mesh filters of the water supply could be blocked (see "Care And Maintenance");
• the position of the separator in the main wash chamber is adapted to the use of powder or liquid detergent (see "Detergents And Additives").

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

…

Machine vibrates during spin cycle.

Issue:

Check whether:

• the washing machine is level and standing firmly on all four feet;
• the transport bolts have been removed. Before using the machine, it is imperative that the transport bolts are removed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

…

Final spin results are poor.

Issue:

The washing machine has an imbalance detection and correction system. If individual heavy items are loaded (e.g. bathrobes), this system may reduce the spin speed automatically or even interrupt the spin completely if it detects too great an imbalance even after several spin starts, in order to protect the washing machine.

• If the laundry is still too wet at the end of the cycle, add smaller articles of laundry and repeat the spin cycle.
• Excessive foam formation may prevent spinning. Use the correct amount of detergent.
• Check that the spin speed selector has not been set to "0".

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

…

If your washing machine has a time display: the programme time initially displayed is lengthened / shortened by a period of time:

Issue:

This is a normal capacity of the washing machine to adapt to factors that can have an effect on the wash programme time, e.g.:

• excess foam formation;
• load imbalance due to heavy items of laundry;
• prolonged heating time due to reduced inlet water temperature;

Because of influences like these, the time remaining in the programme run is recalculated, and updated if necessary. In addition, during the filling phase, the washing machine determines the load and if necessary adjusts the initial programme time displayed accordingly. During such update periods, an animation appears on the time display.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

FH

Water supply fault - "Water tap closed" indication lights up

Issue:

The appliance has no or insufficient water supply. For models with remaining time display, "FH" appears on that display. The "Start/Pause" indicator flashes.

Advice:

Check whether:

• the water tap is fully open and there is sufficient water supply pressure.
• kinks are present in water hose.
• the mesh filters of the water supply are blocked (see "Care And Maintenance"/"Cleaning the mesh filter in the water supply hose(s)").
• the water hose is frozen up.
• if your washing machine has an inlet hose as shown on picture "B": the safety valve inspection window is red. Replace the hose by a new one available through our After-Sales Service or your specialist dealer. After the problem has been removed, restart the programme by pressing "Start/Pause" again.

If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

FP

Draining fault - "Clean pump" indication lights up

Issue:

Waste water is not pumped out. The "Clean pump" indication lights up.For models with a remaining time display, "FP" appears on that display.

Advice:

The washing machine stops in the appropriate programme step. Unplug the appliance. Check whether:

• kinks are present in the drain hose;
• the pump or the filter is blocked (see "Removing The Filter/Draining Residual Water").IMPORTANT: make sure the water has cooled before draining the appliance.
• the drain hose is frozen up.

Plug in the appliance again. Select and start the "Drain" programme or push the "Reset" button for at least 3 seconds and restart the desired programme. If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F02 to F35

Electrical module fault - "Service" indication lights up

Issue:

The appliance stops during the programme. For models with a remaining time display: A failure code between "F02" and "F35", "FA" or "Fod" appears on that display.

Advice:

If a failure code between "F02" and "F35" appears on the display: Select and start the ìDrainî programme or push the "Reset" button for at least 3 seconds. Then select and start the desired programme again. If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

FA

If failure code "FA" appears on the display:

Issue:

If failure code "FA" appears on the display

Advice:

If failure code "FA" appears on the display: Switch the appliance off, pull out the mains plug and turn the water tap off. Tilt the appliance forward carefully to allow the collected water to flow out from the bottom of the appliance. Then:

• connect the appliance to the electrical supply;
• turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a failure. Turn off the tap and notify the After Sales Service);
• select and start the desired programme again. If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Fod

f failure code ìFodî appears on the display:

Issue:

If failure code ìFodî appears on the display: Too much foam interrupted the washing programme. Avoid excessive detergent dosing.

Advice:

• Select and start the "Rinse & Spin" programme.
• Afterwards, select and start the desired programme again, using less detergent. If the fault persists, please arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E1

Water-inlet error

Issue:

Water-inlet error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E2

Aquastop / Overflow

Issue:

Aquastop / Overflow

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E3

Pumping error

Issue:

Pumping error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E4

Heating error

Issue:

Heating error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E5

NTC - Error

Issue:

NTC - Error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E6

Motor klixon failure - Tacho error

Issue:

Motor klixon failure - Tacho error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E7

Hybrid timer error

Issue:

Hybrid timer error

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E8

Input error via T4.1-T4.4

Issue:

Input error via T4.1-T4.4

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

E9

Triacnhort circuit

Issue:

Triacnhort circuit

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bauknecht Washing Machine Repairs in London.

...

...

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Oven Repairs in London.

E1

No fill. Longer than expected fill time.

Issue:

No fill. Longer than expected fill time.

Advice:

• Check the water pressure of your mains water supply.
• Clean the mesh filter that sits in the inlet hose.
• Ensure that the inlet hose is not kinked or crushed.
• Make sure the water tap that the machine is connected to is turned on fully.

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E2

No drain. Longer or extended drain time.

Issue:

Longer or extended drain time. The drain pipe may be placed in too high a position or incorrectly.

Advice:

• Check the installation instructions and ensure that the installation is correct.
• Check that the outlet hose is not kinked or crushed. beyond its original length.

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E3

NTC/Element fault

Issue:

Longer heating time- not reaching the required temperature. Malfunction of the temperature sensor or heating element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

E4

Overfilling

Issue:

The machine has sensed water in the base.

Advice:

• Check that the outlet hose is not kinked or crushed.
• Check that there are no blockages in the drain hose or the drainage system that the appliance is connected to. The drain pipe may be placed in too high a position or incorrectly.
• Check the installation instructions and ensure that the installation is correct. Oversudsing being caused by a 3 in 1 detergent tablet being used with separate salt and/or rinse aid.

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E5

Cannot switch off automatically- programme not finishing (not for BDW 13, 14 or 15)

Issue:

Switch cannot shut off automatically- program not finishing its cycle. Low voltage or power switch failure.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

E6

OC Thermistor

Issue:

Open circuit. Thermistor

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

E7

SC Thermistor

Issue:

Short circuit. Thermistor

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

Err1

Longer Fill Time

Issue:

Faucet Is Not Opened

Advice:

Ensure that inlet hose is not kinked or crushed. If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Err2

Longer Or Extended Draining Time

Issue:

The Drain Pipe Was Placed Too High When It Was Installed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

Err3

Longer Heating Time – Not Reaching Required Temperature

Issue:

Malfunction Of Temperature Sensor Or Of Heating Element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

Err4

Overfilled

Issue:

Too Much Inlet Water. *Note * - There Are Numerous Causes Of An ‘Err4’ Message. Refer To Appliance Usage Section Of This Manual For Guidelines On How To Prevent An Overfill.

Advice:

Overdosing. 3-in-1 put in with salt and/or rinse aid in the appliance = overdose. Could also be a Water Pressure problem. If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Err6

Open Circuit

Issue:

Thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

Err7

Short Circuit

Issue:

Thermistor

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Dishwasher Repairs in London.

...

...

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Fridge Freezer Repairs in London.

...

Unsatisfactory drying results

Issue:

• The filter is dirty.
• The venting hose has become blocked.
• Incorrect volume of laundry.

Advice:

• Clean the filter.
• Select a different program the next time you dry.
• Unblock the venting hose.
• Observe recommended loading volumes.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Your tumble dryer is not working at all.

Issue:

• There is no power supply.
• The door is not closed properly.
• Have you pressed the start/pause button?
• The mains cord is damaged.

Advice:

• Connect to a power supply.
• Close the door before trying to operate your appliance again.
• Pressing the start/pause button again will resume the cycle is it has been paused.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Drying cycle lasts an unusually long time.

Issue:

• Load volume is too big.
• Load is too wet.

Advice:

• Reduce load volume.
• Reduce the amount of water within the load by ensuring to wring-out or spin-dry the laundry before using the dryer.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Does not work on any programme

Issue:

• Plug not in socket.
• Not switched on.
• Power failure.
• Fuse blown.
• Door open.

Advice:

• Plug it in.
• Switch on.
• Check.
• Close door

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Does not fill with water

Issue:

• Tap turned off.
• Programme selector not correctly positioned.
• Fill hoses are kinked

Advice:

• Check.
• Turn on tap.
• Position programme selector correctly.
• Straighten fill hoses

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Water does not drain away

Issue:

Kink in discharge hose. House drain is blocked Odd material blocking filter.

Advice:

• Straighten discharge hose.
• Clean drain Check filter.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Water on floor around the washing machine

Issue:

• Leaking gasket between tap and water inlet hose.
• House drain is blocked.
• Soap drawer blocked with soap residues

Advice:

• Replace gasket and tighten hose and tap well.
• Clean drain.
• Clean soap drawer.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Does not spin

Issue:

• Water has not yet drained away.
• "No spin" selected (certain models only).

Advice:

• Wait a few minutes for machine to empty.
• Reset button or turn "no spin" knob.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Machine vibrates a lot during spin

Issue:

• Washing machine not completely level.
• Transit brackets not removed yet.
• Load not distributed evenly

Advice:

• Adjust the special adjustable feet.
• Remove transit brackets.
• Rearrange the laundry evenly

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Baumatic Tumble Dryer Repairs in London.

…

Door will not open

Issue:

Two minutes have not elapsed since the programme finished.

Advice:

Wait two minutes.

F1

Connection to temperature sensor either open or short circuit

Issue:

The fault code is displayed, if the connection to the temperature sensor is open or if there is a short circuit between the two terminals of the sensor.
The wash program will be cancelled without heating.
The failure will be displayed at the end of the wash program.

Advice:

• Check wiring to thermistor and connections on PCB
• Check thermistor

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F2

Water level not reached

Issue:

This faut code is displayed, if within an filling or heating step the water level is below level 1 for 4 minutes.
If the filling step is shorter than 4 minutes, the code will not be set.
If the failure occured the first time within a washing program, the current step will be started again. If the the failure occured the second time, the washing program is stopped, and the fault code will be displayed.
To continue the washing program, the owner has to press the Start button.
If the failure occured the third time, the washing program is stopped, the failure will be displayed, and it is not possible to start the washing machine again.

Advice:

• Check water supply
• Check for a leak in the machine
• Check water valve
• Check wiring
• Check connections to water valve and PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F31

Motor tacho detected open or short circuit

Issue:

A washing program is active and the motor control unit gets no signal from the tacho generator. The washing machine is stopped immediately and the failure is displayed.

Advice:

• Check motor tacho wiring
• Check motor connection block
• Check PCB connections
• Replace motor

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F32

Motor triac or IGBT short circuit

Issue:

The fault code is displayed, if the washing program is active and the motor is working without control of triac or IGBT. The washing machine is stopped immediately and the failure is displayed.

Advice:

• Check motor tacho wiring
• Check motor connection block
• Check PCB connections
• Replace PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F4

Water temperature not reached

Issue:

Error code displayed if after a heating step the temperature is more than 15°C lower than the rated or set temperature. The washing program will be ended normally. The error code is displayed at the end of the washing program.

Advice:

• Check heater connections
• Check PCB connections
• Check wash heater element for continuity
• Check thermostats or thermistors

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F41

Water overheat error

Issue:

Error code displayed if the washing program is active and the water temperature is 7°C higher than the maximum rated temperature of the washing program selected. The washing machine will be stopped immediately and the fault code will be displayed.

Advice:

• Check wiring to thermostat or thermistor
• Check wash thermostat or thermistor
• Check heater relay on PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F43

Water heating error

Issue:

• Fault code displayed if the temperature gradient within a heating step is higher than about 9°C in a minute.
• In a time of one minute, the temperature is measured and the corresponding gradient related to the last measurement is calculated.
• If the failure happens, the washing machine is stopped immediately and the failure will displayed.
• Ordinarily this would be caused by the washing machine attempting to heat with no water in it.

Advice:

• Check pressure sensor wiring and connections
• Check PCB connections for pressure sensor

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F5

Failure to drain water

Issue:

If after a drain section of the wash program the water level did not fall below level one then this fault code will be displayed.
If the failure to empty occured the first time within a program, the drain step will started again.
If the failure occurs a second time, the washing machine is stopped and the fault code is displayed.
To continue the wash program, the user has to press the Start button.
If the failure occurs for a third time, the wash program is stopped and the failure is displayed. At this point is not possible to start the washing program again until the problem is rectified.

Advice:

• Check drain filter for blockage
• Check drain pump for blockage
• Check drain pump wiring
• Check drian pump for continuity
• Check drain pump connections on PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F61

Motor field relay not switched

Issue:

This error code is displayed at the end of the spinning cycle or the test program if the spin is more than 100rpm lower than the rated speed. The error code is displayed after the end of the testing program.

Advice:

• Check the motor connections
• Check tacho coil and magnet for damage
• Check PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F63

Communications error

Issue:

No communication with the chopper unit for 10 transmissions. The washing machine is stopped immediately and the failure is displayed.

Advice:

• Check wiring between PCBs
• Replace faulty PCB

If the problem persists, please arrange an engineer visit. We offer fixed price Baumatic Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

H2

Dishwasher turbidity sensor error

Issue:

The turbidity sensor is the sensor in the sump that detects the presence of deterrgent.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.

H3

Dishwasher diverter valve position error

Issue:

The diverter valve is the valve that controls the water flow to the either the top or bottom spray arms or to both at the same time.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.

H4

NTC Error

Issue:

The dishwasher cannot read the temperature sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.

H5

Uninterruptable water inlet error

Issue:

The electronic controller of the dishwasher monitors the water counter pulses during every step of the wash program. If the pulses received from the counter at any stage except when the dishwasher is supposed to be filling, and if the received pulses exceed 0.6 lt. of water then this error will be displayed. When the fault detected, software drives the drain pump with 1 minute intervals (1 min ON, 1 min. OFF). During this interval if counter pulses stop (the dishwasher ceases to fill) then program will continue. Malfunction of Water-Inlet Valve (stuck as open). Malfunction of T7 triac on the electronic board

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.

H6

Water inlet fault

Issue:

No water is detected to teh dishwasher or, it fails to fill.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.

H7

Heating fault

Issue:

The dishwasher canot detect the heater or reach the correct temperature.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.