E01

Antiflood device in base has been activated

Issue:

Check for leak. Check float switch in washing machine base

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E04

Washer dryer wash NTC (temperature sensor) shorted or open circuit

Issue:

Check wiring. Check wash NTC

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E05

Water inlet valve error detected

Issue:

Check water supply to the washing machine is on. Check fill hose is not kinked. Check inlet valve filter. Check water inlet valve

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E06

Drain error detected

Issue:

Check drain pump filter. Check drain pump for blockage or restriction. Check outlet hose for blockage or obstruction. Check drain pump operation. Check drain pump wiring

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E10

Motor fault detected

Issue:

Check motor connector block. Check wiring. Check motor carbon brushes. Check tacho connections. Check motor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E14

Dryer NTC detected open or shorted

Issue:

Check wiring to dryer temperature sensor. Check NTC

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Washer Dryer Repairs in London.

E0

No fault codes are recorded

Issue:

No component problems were detected. When you enter the diagnostic test mode and retrieve saved fault codes from the control memory, this E0 code is displayed when no fault code is recorded.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E1

Heating problem

Issue:

Check the water fill level. If water level is too low, the heater won’t turn on. If the water level is okay, the flow switch or the heater could be defective. A service technician usually needs to diagnose and repair a heating failure because accessing the heater requires removing the dishwasher tub.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E2

Temperature sensor defective

Issue:

A service technician usually needs to diagnose and repair a temperature sensor problem because accessing the sensor requires removing the dishwasher tub.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E3

Not filling

Issue:

If the water supply cut-off valve for the dishwasher is fully open and the dishwasher still won’t fill, shut off the water supply, unplug the dishwasher, disconnect the fill line and check whether the screen in the water inlet valve is clogged. If it’s clogged, replace the water valve—don’t just clean the screen, because debris could fall into the valve body, prevent the valve from closing, and cause flooding. If the dishwasher still won’t fill, have a service technician diagnose and repair the dishwasher.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E4

Water switch defective

Issue:

A service technician usually needs to diagnose and repair a water switch problem because accessing the sensor requires removing the dishwasher tub.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E5

Overfilled

Issue:

Unplug the dishwasher or shut off the house circuit breaker to disconnect electrical power. If the dishwasher continues to fill, replace the water inlet valve assembly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E6

Aqua sensor defective

Issue:

The aqua sensor detects how dirty the water in the dishwasher is. A service technician usually needs to diagnose and repair an aqua sensor problem because accessing the sensor requires removing the dishwasher tub.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E01, E02, E03, E04, E05

Power module failure

Issue:

The E01, E02, E03, E04, E05 faults codes mean that the dishwasher has suffered a power module failure. The programming of replacement power modules has been locked down by Bosch so in the event of an error code of this type it’s recommended that you contact a Bosch approved dishwasher engineer

Advice:

To gain access to the power module you will either need to remove the top and side panels or on some models the outer door skin and control panel. Remove the screws and slide the top off, then remove the screws from the side panels and lift off (note on some models you may have to remove the front ‘kick plate' to reach these). The power module is usually on the right side of the base near the back. Check for any signs of visible damage and replace if required.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E06

Door Lock - Door mechanism problem

Issue:

Bosch Dishwasher Error Code E06 - The sensor/switch that detects whether the door is locked before starting a cycle is damaged or faulty.

Advice:

Assure the door can close correctly against the latch. Check for obstructions and replace part if necessary.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E07

Dryer Fan - Dishes not drying due to faulty fan

Issue:

If your dishwasher is flashing with an E07 error code it is likely to be a problem with the dryer fan.

Advice:

The fan is usually found at the base of the machine, so be sure to disconnect any water pipes to avoid any mishaps. Begin by removing the lid and the left-hand side panel. With the panels off - reach under the cavity where you should be able to access the fan. Once you’ve removed the fan check it turns freely and the motor shows resistance when checked with a multimeter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E08

Solenoid Inlet Valve - Water is not filling above level of heating element

Issue:

If your Bosch dishwasher is flashing an E08 error code at you, it is usually related to a low water level inside the heater of the dishwasher. Most likely a problem with the heating element, or filling issue

Advice:

Check the solenoid valve flow meter for any signs of damage. Remove the fill hose. Carefully remove the small filter from the inside of the valve or the hose seal filter if fitted and inspect for blockages. If the filter is clear, the solenoid valve is likely to need replacing. Prior to replacing check the water valve for faults using a multimeter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E09

Water heating problem. Most likely related to heating element

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E10

Heating element problem - Heating Element

Issue:

Bosch Dishwasher E10 Error Code - The E10 fault is associated with the heating element being blocked with limescale.

Advice:

Check for blockages/build-up/limescale that could be stopping water from interacting with the element properly. If you have run the cleaning solution through your dishwasher and the error code persists, the excessive limescale may have caused damage to the heating element and will need to be changed.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E11

Thermostat or temperature sensor faulty - NTC Thermistor

Issue:

The Bosch dishwasher E11 error code is usually associated to a faulty NTC/thermistor.

Advice:

Replace faulty part if necessary. To access the NTC thermistor remove the base panel if possible to find the sump. Look for visible signs of corrosion or damage to the plug or wires and replace the sensor if needed.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E13

Water temperature exceeding 75C

Issue:

Have you connected your dishwasher to a hot water supply? If so switch to cold

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E14

Flow Meter - Reed switch flow sensor fault

Issue:

If your Bosch dishwasher is flashing with an E14 error code, it is usually associated with a faulty flow meter.

Advice:

Check contacts on the reed switch connection are clean. To access the flow switch, remove the top lid and the left side outer panel. Depending on your model the flow sensor may be in the pipe after the water inlet valve or the plastic chamber on the side. Inspect the flow switch for any signs of corrosion that may have caused damage.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E15

Water Leak - Water leaking through to dishwasher base

Issue:

If your Bosch dishwasher is displaying an E15 error code as you switch your machine on, it’s an indication that there is water sitting in the base of the dishwasher.

Advice:

Empty the base of water. If error occurs again then your dishwasher has a leak. Build up of water in the base that may be causing an overflow - check this by tipping the machine slightly to one side, allowing excess water to flow away onto the floor. Ensure there is no holes or damage to any of the internal parts causing the leak into the base. A combination of error codes may be displayed or by a resounding tone, which will indicate the anti-flood switch being turned on due to leaks.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E16

Solenoid Inlet Valve - Water inlet valve fault

Issue:

If your dishwasher is displaying an E16 error code, it is most likely related to a faulty water inlet valve.

Advice:

Check inlet valve and water supply. Check the solenoid valve flow meter for any signs of damage. Remove the fill hose.Carefully remove the small filter from the inside of the valve or the hose seal filter if fitted and inspect for blockages. If the filter is clear, the solenoid valve is likely to need replacing.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E17

Water level too high (overfill)

Issue:

If your dishwasher is displaying an E17 error code, it is most likely related to a problem with the water level in the dishwasher being too high. Possible flow sensor fault, or drainage problem.

Advice:

Inspect the tube for obstructions as it may cause the dishwasher to overfill with water. Remove any gunk and run a test wash. If the problem still persists, check the float and switch are operating correctly and replace the float switch if required to solve your worries.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E18

Water level too low (underfill)

Issue:

The E18 error code is usually related to a low water level inside the dishwasher. Can be due to a problematic water valve.

Advice:

Make sure the drain hose rises above the water level at the back of the machine to prevent water running out. Check the water inlet valve is not restricted and check for faults using a multimeter. Ensure the water supply flowing into the machine is not restricted.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E20

Electrical short or break - Low Resistance on Dishwasher Motor

Issue:

Short or break causing incorrect resistance in winding of the circulation pump or the motor

Advice:

Remove any water in the sump of the machine. Gain access to the wash motor and check the resistance using a multimeter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E21

Circulation Pump Blocked

Issue:

If your dishwasher is flashing with an E21 error code, it is indicating a problem with the wash motor.A blockage between the motor or the pump resulting in insufficient water flow.

Advice:

Remove any excess water before removing the base of the machine to release the pump. Check and remove any blockages preventing the circulation pump from turning and Replace if any damage is found.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E23

As error code E20, but this time the electrical problem is with the drain pump

Issue:

Replace drain pump if necessary

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E24

Filter - Dishwasher not draining properly

Issue:

Drain filters blocked - If your dishwasher is flashing with a E24 error code on the display panel, then most likely you may have an issue with the filters in the base of the dishwasher being blocked.

Advice:

Locate the filter, usually located on the floor of the dishwasher. See your user manual on how to safely remove the filter. Check to see if the filter has any damage - such as holes. While the filter is removed also check to see if any food has become trapped, and clean if required.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E25

Blocked Drain Pump - Dishwasher not draining properl

Issue:

Bosch Dishwasher Error Code E25 - Possibly blocked filters, as above. Otherwise this fault code could indicate a blocked drain pump

Advice:

Glassware can break during the wash - if this has happened the shards may have fallen and gathered within the pump. Using a multimeter, test the terminals and if you don’t get a reading of between 100 and 300 Ohms - or a reading of zero or excessively over - then the pump has failed and you will require a new replacement pump.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E26

Water switch/regulator problem

Issue:

Check water switch and replace if required

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E28

Turbidity Sensor - Fault detected with turbidity sensor

Issue:

If your dishwasher display is showing an E28 error code it is likely to be a problem with the turbidity sensor - which is located at the bottom of the machine. Dishes not getting clean. Dirty water in the tub

Advice:

You’ll first need to remove the base of the dishwasher and find the turbidity sensor - located either in the sump or hoses in the base of the machine. Inspect the sensor for a buildup of debris and blockages and replace if required.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

A or B

Fault with the water sensor

Issue:

Inspect dishwasher for evidence of leaks. Ascertain whether anti-flood protection has been activated

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

С

Motor tacho fault

Issue:

Check motor and motor tacho wiring for problems

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

D

Wiring/electrical fault related to motor triac

Issue:

Check wiring on/to PCB and motor. Check the triac (on the PCB)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E

Diverter valve fault

Issue:

Inspect diverter valve and its wiring for problems

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

F

Fill timeout.

Issue:

The required water level is not sufficient within six minutes of the start of the programme

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

G

Diverter triac fault

Issue:

Check diverter triac (on PCB) and its wiring

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

H

Dishwasher not heating

Issue:

Possible problem with heating element or thermostat, or wiring issue

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

K

Faulty thermostat sensor (NTC)

Issue:

Inspect the NTC and thermostat, and their wiring

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

0

Pressure sensor fault

Issue:

Check the pressure sensor and its wiring

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Dishwasher Repairs in London.

E01

Refrigerator compartment temperature sensor is defective

Issue:

Unplug the refrigerator and reconnect any loose connections on the wire harness on the temperature sensor for the refrigerator compartment, which is in the upper right corner of the refrigerator.

Advice:

Replace the wire harness if damaged. If the wire harness connection is okay, replace the refrigerator compartment temperature sensor. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E02

Freezer compartment temperature sensor is defective

Issue:

Unplug the refrigerator and reconnect any loose connections on the wire harness on the temperature sensor for the freezer.

Advice:

Replace the wire harness if damaged. If the wire harness connection is okay, replace the freezer compartment temperature sensor. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E03

Temperature-controlled drawer temperature sensor is defective

Issue:

Unplug the refrigerator and remove the temperature-controlled refrigerator drawer. The temperature sensor is on the right side of the refrigerator compartment liner. Remove the sensor cover reconnect any loose connections on the wire harness on the temperature sensor for the drawer. Reconnect the wire harness if loose. Replace the wire harness if damaged. If the wire harness is okay, replace the temperature controlled drawer temperature sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E15

Ambient temperature sensor is defective

Issue:

The ambient temperature sensor is an internal component of the display control module. Unplug the refrigerator for 3 minutes to reset the display control module. If the E15 code returns you restore power, replace the display control module.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E10

Main control board module is defective

Issue:

Unplug the refrigerator for 3 minutes to reset the main control board module. If the E10 code returns after you restore electrical power, replace the main control board module.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E11

Display control module is defective

Issue:

Unplug the refrigerator for 3 minutes to reset the display control module. If the E11 code returns after you restore electrical power, replace the display control module.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E20

Communication error between the main control board module and the display control module

Issue:

Unplug the refrigerator and reconnect any loose connections on the wire harness for the main control board module and the display control module. Replace the wire harness if damaged. Check the main control board module and display control module for burnt spots on the circuit boards or visible damage. Replace the main control board module or display control module if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E21

Communication error between display control module and the ice and water dispenser control module

Issue:

Unplug the refrigerator and reconnect any loose connections on the wire harness on the display control module and the ice and water dispenser control module. Replace the wire harness if damaged. Check the display control module and ice and water dispenser control module for burnt spots on the circuit boards or visible damage. Replace the display control module or ice and water dispenser control module if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Temperature differs greatly from the set value.

Issue:

In some cases it is adequate to switch off the appliance for 5 minutes. If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Displays do not illuminate.

Issue:

Power failure; the fuse has been switched off; the mains plug has not been inserted properly.

Advice:

• Connect mains plug.
• Check whether the power is on, check the fuses.

E..

Display indicates “E..”.

Issue:

Electronics have detected a fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Warning signal sounds and the temperature display on the freezer compartment flashes. The freezer compartment is too warm! Frozen food is at risk!

Issue:

…

Advice:

To switch off the warning signal, press the “alarm/lock” button. The display stops flashing. The warmest temperature reached in the freezer compartment is indicated on the temperature display for 10 seconds. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

The light does not work.

Issue:

The light is defective.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Appliance has no refrigeration capacity. The light does not work. The display does not illuminate.

Issue:

Power failure. The fuse has been switched off. The mains plug has not been inserted properly.

Advice:

• Check whether the power is on.
• Check the fuse.
• Check whether the mains plug is secure.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

The refrigerating unit is switching on more frequently and for longer.

Issue:

Appliance opened frequently. The ventilation openings have been covered. Large quantities of fresh food are being frozen.

Advice:

Do not open the appliance unnecessarily. Remove obstacles. Do not exceed max. freezing capacity. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Despite prolonged operating time, ice cubes are not being dispensed.

Issue:

Tap turned off. Water supply is interrupted. Water pressure too low. Ice and water dispenser is switched off. “IWD off” is lit on the display panel. Freezer compartment too warm.

Advice:

Turn on tap. Inform plumber. Switch on ice and water dispenser (see chapter “Special functions”, section “Switching off [IWD off]”). Lower temperature in the freezer compartment (see chapter “Setting the temperature”). We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Ice cubes are in the ice cube container but are not being dispensed.

Issue:

Ice cubes are frozen together.

Advice:

Remove and empty the ice cube container. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Ice cubes are jammed in the outlet of the ice cube container or in the ice crusher.

Issue:

Advice:

Remove the ice cube container and rotate the screw conveyor by hand. Loosen any jammed chunks of ice with a wooden chopstick. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Ice cubes are watery. Ice cubes have melted.

Issue:

Freezer compartment door is open. Power failure.

Advice:

Remove the ice cube maker, empty and rub dry. Close the door. Check whether the power is on. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Water dispenser is not functioning.

Issue:

Tap turned off. Water supply is interrupted. Water pressure too low.

Advice:

Turn on tap. Inform plumber. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

The ice maker does not make enough ice or the ice is deformed.

Issue:

The appliance or ice maker has only just been switched on. A lot of ice has been taken. Low water pressure. The water filter is bunged up or used. Temperature in the freezer compartment is too warm.

Advice:

Approx. 24 hours is needed until ice production starts. Approx. 24 hours is needed until the ice cube container is filled again. Connect the appliance to the stipulated water pressure only (see chapter Connecting the appliance, section Water connection). Change the water filter. Set temperature slightly colder in the freezer compartment. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

…

Bubbling, gurgling noises in the water line.

Issue:

Water supply is interrupted or water line is blocked.

Advice:

• 1. Check water supply.
• 2. Check whether the water line is blocked.
• 3. In certain cases, briefly switching off the ice and water dispenser is sufficient (see [IWD off] in section 'Special functions').

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Freezer Repairs in London.

E1

Flashes on fridge display - Temperature sensor malfunction

Issue:

The fridge will operate on ten minutes on, ten minutes off is this error code is displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Repairs in London.

E2

Flashes on the freezer display - Temperature sensor malfunction

Issue:

If this error code is displayed the compressor will run continuously and the error relates to the freezer air sensor. The Freezer evaporator sensor controls the fridge freezer defrost cycle which runs for eighteen minutes once in every twenty four hour period.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Repairs in London.

…

Temperature differs greatly from the set value.

Issue:

…

Advice:

In some cases it is adequate to switch off the appliance for 5 minutes. If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day.

…

Displays do not illuminate.

Issue:

Power failure; the fuse has been switched off; the mains plug has not been inserted properly.

Advice:

Connect mains plug. Check whether the power is on, check the fuses.

…

The light does not function.

Issue:

The LED light is defective. / Appliance was open too long. Light is switched off after approx. 10 min.

Advice:

When the appliance is closed and opened, the light is on again. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Fridge Repairs in London.

…

Bottom of the refrigerator compartment is wet.

Issue:

The condensation channel or drainage hole are blocked.

Advice:

Clean the condensation channel and the drainage hole.

…

The temperature in the refrigerator compartment is too cold.

Issue:

Temperature has been set too low.

Advice:

Increase the temperature.

…

The refrigerating unit is switching on more frequently and for longer.

Issue:

Appliance opened frequently. The ventilation openings have been covered.

Advice:

Do not open the appliance unnecessarily. Remove obstacles.

…

Appliance is not cooling, temperature display and light are lit.

Issue:

Showroom mode is switched on.

Advice:

Hold down alarm button, for 10 seconds until an acknowledgement signal sounds. After a short time check whether your appliance is cooling.

E...

Display indicates "E...".

Issue:

Electronics have detected a fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Bosch Freezer Repairs in London.

…

Displays do not illuminate.

Issue:

• The mains plug has not been inserted properly.
• The fuse has tripped.
• The power has failed.

Advice:

• Connect the mains plug.
• Check the fuses.
• Check whether the power is on.

…

Temperature differs greatly from the set value.

Issue:

…

Advice:

Switch off appliance for 5 minutes. If the temperature is too warm, check temperature again after a couple of hours. If the temperature is too cold, check temperature again on the following day.

…

A warning signal sounds and button alarm is lit

Issue:

• Appliance door is open.
• Ventilation openings have been covered.
• Large quantities of fresh food were placed in the appliance.

Advice:

• Press the alarm button.
• Alarm is switched off.
• Close the appliance door.
• Clear ventilation openings.
• Do not exceed max. freezing capacity.

…

Display flashes, warning signal sounds and button alarm is lit.

Issue:

• Appliance door is open.
• Ventilation openings have been covered.
• Large quantities of fresh food were placed in the appliance.

Advice:

• Press the alarm button.
• Alarm is switched off.
• Close the appliance door.
• Clear ventilation openings.
• Do not exceed max. freezing capacity.

…

Display flashes.

Issue:

The temperature in the freezer compartment was too warm.

Advice:

When button alarm has been pressed, the warmest temperature reached in the freezer compartment is displayed for 5 seconds. Press the alarm button. The display stops flashing.

…

Appliance is not cooling, display and light are lit.

Issue:

Demo mode switched on.

Advice:

Hold down button alarm for 10 seconds until an acknowledgement signal sounds. Wait and check whether the appliance is cooling.

…

Appliance is notcooling, temperature display and lightare lit.

Issue:

Showroom mode is switched on.

Advice:

Hold down temperature selection button 2/4 for 10 seconds until an acknowledgement signal sounds. After a short time check whether your appliance is cooling.

…

The light does notwork.

Issue:

• The bulb is defective.
• Light switch is jammed.

Advice:

• Switch the appliance off.
• Pull out mains plug or switch off fuse.
• Remove bulb cover from the rear.
• Change the bulb.
• Check whether it can be moved.

…

The frozen foodis frozen solid.

Issue:

…

Advice:

Loosen frozen food with a blunt object. Do not use a knife or pointed object. You could damage the refrigerant tubing or the plastic surface.

…

There is a thick layerof frost in the freezer compartment.

Issue:

…

Advice:

• Defrosting the freezer compartment.
• Always ensure that the freezer compartment door is closed properly.
• Freezer compartment door must click" shut.

E5

There is an electrical problem with the ice maker system

Issue:

There is an electrical problem with the ice maker system

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.

E2

The problem is related to a blocked ice path.

Issue:

The problem is related to a blocked ice path.

Advice:

Clean the ice bin and check that lid in front of bin, can open and close properly. Clean and check also the ice lid placed in the door. If the problem persists, please arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E1

Water supply or the appliance Ice bin

Issue:

The problem is related to your water supply or the appliance Ice bin is not in the correct position.

Advice:

Water supply: Disconnect the appliance from the power supply. Close the water tap and disconnect the filling tube. Place a bucket under the tap and then open the tap and check the supply water flow. If water flow is ok, clean the filter in the filling hose. Connect the filling hose again and make sure the hose is not jammed or twisted. Open the water tap and connect the power supply.
Ice bin: Adjust the ice bin position and make sure it is fully inserted.
If the problem persists, please arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E3

There is an electrical problem with the ice maker system

Issue:

There is an electrical problem with the ice maker system

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.

Flashing light

Internal light bulb is loose or defective. Fasten or replace the bulb as described in the user instructions.

Issue:

Flashing light bulb or led lights can also indicate that the ambient temperature is too warm or too cold. Check the temperature classification as indicated on the rating plate.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.

...

The green and red Led lights of my freezer are flashing

Issue:

It is possibly a problem with cooling system.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.

O

There is o flashing in display of my freezer

Issue:

It is possibly a faulty temperature sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.

...

The green and yellow Led lights of my freezer are flashing

Issue:

It is possibly a problem with cooling system.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Freezer Repairs in London.