E50

My Dryer shows the error code E50

Issue:

The error E50 is related to a motor or a software problem.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E60

Now the Dryer turns off at ventilate and shows error-code E60 and stays cold

Issue:

The error E60 is related to a heating problem. This problem can be caused by insufficient ventilation in the room.

Advice:

Ensure that there is sufficient fresh air in the room is, and that the device is not built in. This problem can also be caused by a dirty condenser or dirty fluff filters. Ensure that they are clean. If the error code still appears, then the problem can be solved by a service engineer. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E20

There is the error message "E20" in the display of my dryer.

Issue:

E20 (or 2 beeps as an acoustic alarm in some models) indicates a water drainage or pump problem.

Advice:

Please check correct installation to external drainage if applicable. You can connect an external water hose to a condensation dryer with a water reservoir at the top, to drain the water away straight in the drain. There is a red hose at the top on the rear of the tumble dryer. This hose needs to be disconnected at the top and extended to hang in the drain. The water then no longer gets in the water reservoir but runs straight off via the drain. Please check that the hose does not have any kinks or blockages in it. Try to avoid any loops in the hose, shorten the length of the hose so the nozzle is at bottom of the appliance, otherwise, leakage can occur. If the fault persists, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Dryer is not starting and the start-/pause-key is blinking.

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

The Start - Pause LED is flashing at my dryer.

Issue:

The Start - Paude LED indicates the End of a selected program. At the End of a Dryer program first all LED's will illuminate. This indicates the anti-crease phase (30 min.); Afterwards the Start - Pause will turn Off and Filter-, Condensor- and End- LED's will illuminate (10 min.); Finally all LED's will turn Off and the Start - Pause starts flashing.

Advice:

This is normal, no remedy required.

ERR

The error message "ERR" flashes 2 times in the display of my dryer (Iron Aid).

Issue:

Fill the steam reservoir to MAX. If the icons are still it up, there is a problem and this has to be checked and repaired by a Service Engineer.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E50

There is the error message "E50" in the display of my dryer.

Issue:

There is a problem with the motor or a software problem.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

C0

There is the error message "C0" in the display of my Dryer.

Issue:

There is no problem with the appliance.

Advice:

This is normal, no remedy required.

E20

My Dryer shows the error-code E20

Issue:

The error E20 is related to a draining or a software problem.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E40

My Dryer shows the error-code E40

Issue:

If an error message E40 appears on the display of your dryer, maybe you forgot to close the door of your dryer, after pressing the start button. If the door is closed and the error message still appears it could be a software problem.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E60

There is the error message "E60" in the display of my dryer.

Issue:

It’s possible that the programme has been interrupted and the system needs time to cool down. Try again after 30 min.

Advice:

If the fault persists, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

The condenser LED is lit at my dryer.

Issue:

This is an indication that the condenser has to be cleaned regularly. If the appliance does not dry properly, clean the condenser, filters and air channels.

Advice:

If cleaning does not help, this has to be checked and repaired by a Service Engineer. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

The reservoir LED is lit or flashing at my dryer.

Issue:

The water reservoir LED is always lit at the end of the drying programme, to remind you to empty the water reservoir after every drying cycle. It is normal if the water reservoir LED is lit after the first drying cycle and there is no water in the water reservoir. The water is first collected in a big reservoir before it is drained off to the water reservoir. If the LED is still lit after switching the appliance off and back on again, or if it lights up early on in the programme, there is water in the overflow reservoir. It’s possible that the condenser has to be cleaned (see user manual). If the tumble dryer is connected to the drain via a hose, it has possibly not been done properly if there is a loop in the hose or if the drainage hose has not been shortened.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

C2

My Dryer shows the error-code C2

Issue:

The error C2 is related to a draining or a software problem.

Advice:

Before booking an engineer it is recommended to reset your appliance. Reset can be done by unplugging the appliance from the socket, wait 30 seconds and plug it back again. If you do not have access to the socket, you may also achieve the same result via the circuit breaker of your home. After plugging in the appliance to the socket, start the appliance and select a programme. If this fault indicator occurs again, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

I cannot turn off the warning light(s) on my Dryer

Issue:

Most of the dryers have three warning LEDs on the control panel. The filter LED: This LED is always lit at the end of the drying programme, to remind you that the filter has to be cleaned after every drying cycle. The indication disappears when the appliance is switched off and back on again. The water reservoir LED (only for condenser and heat pump dryers): This LED is always lit at the end of the drying programme, to remind you to empty the water reservoir after every drying cycle. It is normal if the water reservoir LED is lit after the first drying cycle and there is no water in the water reservoir. The water is first collected in a big reservoir before it is drained off to the water reservoir. If the LED is still lit after switching the appliance off and back on again, or if it lights up early on in the programme, there is water in the overflow reservoir. It’s possible that the condenser has to be cleaned.If the dryer is connected to the drain via a hose, it has possibly not been done properly if there is a loop in the hose or if the drainage hose has not been shortened. The condenser LED (only for condenser and heat pump dryers): This LED is an indication that the condenser has to be cleaned regularly. If the appliance does not dry properly, clean the condenser, filters and air channels.

Advice:

The indication disappears when the appliance is switched off and back on again. If this fault indicator occurs again, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

My Dryer is making an alarm noise

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

There is a LED lit or a LED flashing on my Dryer

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

C6

There is the error message "C6" in the display of my Dryer.

Issue:

There is a problem with the moisture sensor. The programme has taken longer than normal, longer than 4.5 hours. Check that the appliance is connected to a mains socket with safety earth.

Advice:

If this is not the case, there is a problem with the moisture measurement and this can be resolved by a Service Engineer. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

C7

There is the error message "C7" in the display of my Dryer.

Issue:

Reaching the right temperature takes too long. It’s possible there is a problem with the heating element.

Advice:

Check that the filters and the condenser (if applicable) are clean. If the fault persists, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

C8

There is the error message "C8" in the display of my Dryer.

Issue:

There is a problem with the temperature sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

CD

There is the error message "CD" in the display of my dryer.

Issue:

There is a problem with the door lock.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

CE, CF

There is the error message "CE" or "CF" in the display of my dryer.

Issue:

There is a problem with the electronics.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

There a padlock shown in the display of my dryer.

Issue:

The child safety lock has been activated This means the programme cannot be started or (unintentionally) changed. De-activation varies per appliance, so please consult the user manual of your model for details.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

The filter LED is lit at my dryer.

Issue:

The filter LED is always lit at the end of the drying programme, to remind you that the filter has to be cleaned after every drying cycle.

Advice:

The indication disappears when the appliance is switched off and back on again. If the problem persists, please arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E21

Canister fill pump triac faulty.

Issue:

Wiring faulty; Electronic board faulty. Cycle interrupted. OFF

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E22

Triac “sensing” circuit for the canister fill pump faulty

Issue:

Electronic board faulty. Cycle interrupted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E51

Motor power triac short-circuited.

Issue:

Motor faulty; Wiring faulty; Electronic board faulty. Machine Status/Action Cycle interrupted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E52

Intervention of motor overheating safety cut-out.

Issue:

Motor faulty; Intervention of motor overheating cutout; Wiring faulty; Electronic board faulty. Machine Status/Action: Power to the heater unit and reversal of the direction of rotation are interrupted. If the problem does not re-occur, the alarm is memorised and the cycle continues. If the fault persists after several attempts to supply power (about 35 min.), alarm E51 is generated.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E53

Motor triac “sensing” circuit faulty.

Issue:

Electronic board faulty. Machine Status/Action Cycle interrupted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E54

Motor in-operational.

Issue:

Excessive wash load; Voltage too low; Motor/transmission system inoperative. Machine Status/Action: Cycle paused after several attempts at powering the motor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E61

Insufficient heating (maximum time exceeded).

Issue:

Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty. Machine Status/Action: Cycle paused.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E62

Power relay to heater unit faulty.

Issue:

Heater unit faulty; Wiring faulty; Electronic board faulty. Machine Status/Action: Forced cooling cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E63

Intervention of auto-reset thermostat on the heater unit.

Issue:

Thermostat faulty (replace heater unit); Heater unit faulty; Wiring faulty; Electronic board faulty. Machine Status/Action: Disconnects the power supply to the heater unit. If the problem does not re-occur, the alarm is memorised and the cycle continues. If, after several attempts to restore power, the fault persists, alarm E62 is generated.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E64

Heater thermostat.

Issue:

Heater thermostat faulty: Wiring faulty; Electronic board faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E65

Fan motor triac faulty.

Issue:

Fan motor wiring not connected; Motor faulty; Triac interrupted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E66

Fan motor thermal protection.

Issue:

Fan motor wiring not connected; Motor faulty; Triac interrupted.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E67

Triac control faulty.

Issue:

Fan motor wiring not connected; CRM board faulty.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Tumble Dryer Repairs in London.

E00

No alarm

Issue:

No alarm

Advice:

E3A

Faulty sensing by heating resistance relay

Issue:

Faulty sensing by heating resistance relay. Main board defective. Cycle stops with door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E10, C1

My Washing Machine shows the error code "E10" or C1

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E10/E11/E12

Inlet Valve

Issue:

If your washing machine is displaying either an E10, E11 or E12 error code, it is likely that there is a problem with the water filling the drum.

Advice:

If the water supply is turned on and the hose pipe is not kinked the problem may be due to a faulty inlet valve. Check the inlet valve with a multimeter to confirm continuity - typically 2000 to 4000 Ohms.

E11

Filling error

Issue:

Poor fill before wash cycle. Tap off or water pressure too low. Drain hose improperly positioned. Fill valve is defective. Leaks on pressure switch. Pressure switch failed. Wiring fault. Main board defective. Cycle is paused with door locked Start

Advice:

This is usually your basic filling error so the usual should be checked, that the water supply is switched on and then onto the water fill valves. If this fault indicator occurs again, , please arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E12

Difficulty in fill during drying

Issue:

Difficulty in fill during drying (maximum time 3 min. fill in drying during the wash load phase). Tap off or water pressure too low Valve failed. Pressure switch water circuit. Pressure switches. Wiring. Main PCB. Cycle is paused

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E13

Pressure switch faulty

Issue:

Water leaks Drain hose improperly positioned. Water pressure too low. Fill valve is defective. Water circuit on pressure switch is leaking or blocked. Pressure switch faulty. Cycle is paused with door locked

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E20

My washing machine shows error "E20"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E21/E22/E23/E24

Blocked Filter

Issue:

If your washing machine is beaming at you with either an E21, E22, E23 or E24 error code, then most likely there is a problem with draining the water

Advice:

• Drain the water from the machine by lowering the drain hose below the water level to a bowl or your machine may have a drain hose near the filter
• Place a towel under the filter and pull the filter out to remove any debris that may have gathered.
• Check the pump impeller inside the housing turns freely and is not obstructed.

E21

Poor draining

Issue:

Poor draining. Drain hose kinked/clogged/improperly positioned. Drain filter clogged/dirty. Drain pump faulty. Pressure switch faulty. Wiring faulty. Main board faulty. Current leak between heating element and ground. Cycle is paused Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E22

Difficulty in fill during drying or drying condenser blocked

Issue:

Difficulty in fill during drying or drying condenser blocked (pressure switch closed on “FULL”). Drain hose kinked. Filter blocked. Drying condenser blocked. Drain pump faulty. Pressure switches faulty. Wiring. Main circuit board faulty. Current leakage between heater and ground. Cycle is paused Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E23

Defective triac for drain pump

Issue:

Defective triac for drain pump. Drain pump faulty. Wiring faulty. Main board faulty. Emergency drain procedure - Cycle stops with door unlocked OFF/reset

Advice:

This refers to the triac that controls the pump function on the main controller. If the fault persists, please arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E24

Malfunction in sensing circuit on triac for drain pump

Issue:

Malfunction in sensing circuit on triac for drain pump. Main board faulty. Emergency drain procedure - Cycle stops with door unlocked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E30

Door Lock

Issue:

If the digital display on your washing machine is showing either E30 error code, the most likely cause for this could be a faulty door lock.

Advice:

Check the door - you need to confirm that the lock does engage correctly. If there is power to the washing machine and the lock does not engage you will need to replace the lock.

E31

Malfunction in pressure switch circuit

Issue:

Malfunction in pressure switch circuit (frequency of signal from pressure switch out of limits). Pressure switch faulty. Wiring. Main PCB faulty. Cycle stops with door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E32

Electronic pressure switch improperly calibrated

Issue:

Electronic pressure switch improperly calibrated (level on electronic pressure switch differs from 0-66 mm after initial calibration drain and when anti-boiling pressure switch is on “empty”). Tap is off or water pressure is too low. Fill valve faulty. Water circuit on pressure switches. Pressure switches. Wiring. PCB faulty. Cycle is paused Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E33

Inconsistency between level on electronic pressure switch and level on anti-boiling pressure switch 1-2

Issue:

Inconsistency between level on electronic pressure switch and level on anti-boiling pressure switch 1-2 (fault persists for at least 60 sec.). Pressure switch defective. Current leak between heating element and ground. Heating element. Wiring faulty. Main board faulty. Water circuit. Emergency drain procedure - Cycle stops with door unlocked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E34

Inconsistency between level on electronic pressure switch and level on anti-boiling pressure switch 2

Issue:

Inconsistency between level on electronic pressure switch and level on anti-boiling pressure switch 2 (fault persists for at least 60 sec.). Pressure switch faulty. Electrical current leak between heating element and ground. Heating element faulty. Wiring faulty. Main board faulty. Water circuit. Emergency drain procedure - Cycle stops with door unlocked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E35

Overflow error

Issue:

Overflow error. Fill valve is faulty. Leaks from water circuit on pressure switch. Pressure switch defective. Wiring defective. Main board defective. Cycle stops - Emergency drain procedure - Drain pump continues to operate (5 min. on, then 5 min. off, etc.). OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E36

Sensing circuit on anti-boiling pressure switch 1 defective

Issue:

Sensing circuit on anti-boiling pressure switch 1 defective. Main board faulty. Cycle stops with door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E37

Sensing circuit on anti-boiling pressure switch 2 defective

Issue:

Sensing circuit on anti-boiling pressure switch 2 defective. Main board faulty. Cycle stops with door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E38

Internal pressure takeoff is blocked

Issue:

Internal pressure takeoff is blocked (water level does not change for at least 30 sec of drum rotation). Water circuit on pressure switches. Pressure switches. Motor belt broken. Heating phase is skipped

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E39

Defective HV sensing on anti-overflow system

Issue:

Defective HV sensing on anti-overflow system. Main board faulty. Cycle stops with door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E40

My Washing Machine shows the error-code "E40"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E41

Door lock faulty

Issue:

Door unlocked. Door lock faulty. Wiring faulty. Main board faulty. Cycle is paused Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E42

Problem closing the door

Issue:

Problem closing the door. Door lock faulty. Wiring faulty. Main board faulty. Cycle is paused Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E43

Defective triac supplying power to door delay system

Issue:

Defective triac supplying power to door delay system. Door lock unit faulty. Wiring faulty. Main board faulty. Emergency drain procedure - Cycle stops OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E44

Defective sensing by door delay system

Issue:

Defective sensing by door delay system. Main board faulty. Emergency drain procedure - Cycle stops OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E45

Defective sensing by triac on door delay system

Issue:

Defective sensing by triac on door delay system. Main board faulty. Emergency drain procedure - Cycle stops OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E50

My Washing Machine Shows the error code "E50"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E51

Motor power supply triac short-circuited

Issue:

Motor power supply triac short-circuited. PCB faulty. Current leakage from motor or from wiring loom. Cycle blocked, door locked (after 5 attempts) OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E52

No signal from motor tachometric generator

Issue:

No signal from motor tachometric generator. Motor faulty. Wiring faulty. PCB faulty. Cycle blocked, door locked (after 5 attempts) OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E53

Motor triac sensing circuit faulty

Issue:

Motor triac sensing circuit faulty. PCB faulty. Cycle blocked, door locked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E54

Motor relay contacts sticking

Issue:

Motor relay contacts sticking. PCB faulty. Current leakage from motor or from wiring. Cycle blocked, door locked (after 5 attempts) OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E56

Carbon Brushes

Issue:

If the digital display on your washer showing any of the following error codes E56, the likely cause for this would be a defective motor.

Advice:

Once you have access remove the motor. Check for wear on the carbon brushes and replace if required.

E57

Carbon Brushes

Issue:

If the digital display on your washer showing any of the following error codes E57, the likely cause for this would be a defective motor.

Advice:

Once you have access remove the motor. Check for wear on the carbon brushes and replace if required.

E58

Carbon Brushes

Issue:

If the digital display on your washer showing any of the following error codes E58, the likely cause for this would be a defective motor.

Advice:

Once you have access remove the motor. Check for wear on the carbon brushes and replace if required.

E59

Carbon Brushes

Issue:

If the digital display on your washer showing any of the following error codes E59, the likely cause for this would be a defective motor.

Advice:

Once you have access remove the motor. Check for wear on the carbon brushes and replace if required.

E60

My Washing Machine shows the error code "E60"

Issue:

The Error code E60 or any other code beginning with E6 generally refers to the fact that there is a heating problem with your machine. This type of error can only be resolved by booking a service engineer.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E61

Insufficient heating during washing

Issue:

Insufficient heating during washing. NTC sensor faulty. Heating element faulty. Wiring faulty. PCB faulty. The heating phase is skipped

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E62

Overheating during washing

Issue:

Overheating during washing. NTC sensor faulty. Heating element faulty. Wiring faulty. PCB faulty. Safety drain cycle - Cycle stopped with door open OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E66

Heating element power relay faulty

Issue:

Heating element power relay faulty. PCB faulty. Current leakage from heating element to ground. Safety drain cycle - Cycle stopped with door open OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E71

NTC sensor for wash cycle defective

Issue:

NTC sensor for wash cycle defective. Faulty NTC sensor. Wiring faulty. Main board faulty. Heating is skipped revert to Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E72

Fault in NTC sensor on drying condenser

Issue:

Fault in NTC sensor on drying condenser (voltage out of range = short-circuit, open circuit). Drying NTC sensor (condenser) faulty. Wiring faulty. Main circuit board faulty. Heating is skipped revert to Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E73

Fault in NTC sensor on drying duct

Issue:

Fault in NTC sensor on drying duct (voltage out of range = short-circuit, open circuit). Drying NTC sensor (duct) faulty. Wiring faulty. Main circuit board faulty. Heating is skipped revert to Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E74

NTC sensor for wash cycle improperly positioned

Issue:

NTC sensor for wash cycle improperly positioned. NTC sensor incorrectly positioned. Faulty NTC sensor. Wiring defective. Main board faulty. Heating is skipped revert to Start

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E82

Error in selector reset position

Issue:

Error in selector reset position. PCB faulty (Wrong configuration data). Selector, wiring faulty. OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E83

Error in reading selector

Issue:

Error in reading selector. PCB faulty (Wrong configuration data). Selector, wiring. Cycle cancelled

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E84

"Sensing" circuit on circulation pump triac faulty

Issue:

"Sensing" circuit on circulation pump triac faulty (input signal to processor always 0V or 5V). PCB Drain. Cycle blocked (door open). OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E85

Circulation pump faulty

Issue:

Circulation pump faulty (incongruency between status of "sensing" circuit on circulation pump and status of TRIAC). Circulation pump. Wiring. Main PCB. Drain, cycle blocked (door open). OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E90, E91, E92, E93, E94

My washing machine shows error message E90, E91, E92, E93 or E94

Issue:

The Error codes E91, E92, E93 and E94 or any other code beginning with E9 are related to electronic configuration/communication problems on the appliances. Please make a reset at the washing machine by unplugging it, waiting 30 seconds and plugging it again.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E91

Communication incongruence between main PCB- display board

Issue:

Communication incongruence between main PCB- display board (versions not compatible). Wiring faulty. Faulty control/display board. Main PCB faulty. Cycle interrupted

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E92

Communication incongruence between main PCB- display board

Issue:

Communication incongruence between main PCB- display board (versions not compatible). Wrong control/display board. Wrong PCB (do not correspond to the model). Cycle interrupted

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E93

Incorrect configuration of appliance

Issue:

Incorrect configuration of appliance. Incorrect configuration data. PCB faulty. Cycle interrupted OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E94

Incorrect configuration of washing cycle

Issue:

Incorrect configuration of washing cycle. Incorrect configuration data. PCB faulty. Cycle interrupted OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E95

Communication error between microprocessor and EEPROM

Issue:

Communication error between microprocessor and EEPROM. PCB faulty. Cycle interrupted OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

E97

Incongruence between programme selector and cycle configuration

Issue:

Incongruence between programme selector and cycle configuration. Faulty PCB (Wrong configuration data). Cycle interrupted OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EB1

Frequency of appliance incorrect

Issue:

Frequency of appliance incorrect. Power supply problems (incorrect / disturbance). PCB faulty. Cycle interrupted

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EB2

Voltage too high Power supply problems

Issue:

Voltage too high Power supply problems (incorrect / disturbance). PCB faulty. Cycle interrupted

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EB3

Voltage too low

Issue:

Voltage too low. Power supply problems (incorrect / disturbance). PCB faulty. Cycle interrupted

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EC1

Solenoid valve inoperative but flow meter operating

Issue:

Solenoid valve inoperative but flow meter operating. Main board faulty. Fill valve faulty. Cycle stops with door locked (after 5 attempts). OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EC2

Signal from turbidity sensor out of limits

Issue:

Signal from turbidity sensor out of limits. Turbidity sensor faulty. Main board faulty. Wiring faulty. Start/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EC3

Signal from weight sensor out of limits

Issue:

Signal from weight sensor out of limits. Weight sensor faulty. Main board faulty. Wiring faulty. Start/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EF0

My Washing Machine shows error "EF0"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EF1

Drain filter blocked

Issue:

Drain filter blocked (too long drain phase). Drain tube blocked/kinked/too high. Drain filter dirty/blocked. Warning displayed at the end of cycle (specific LED)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EF2

Overdosing of detergent

Issue:

Overdosing of detergent (too much foam during drain phases). Excessive detergent dosing. Drain tube kinked/blocked. Drain filter dirty/blocked

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EF3

Control water intervention

Issue:

Control water intervention. Water leakage on the base. Faulty water control device. Water drain and cycle blocked OFF/reset

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EF4

Low pressure of water fill

Issue:

Low pressure of water fill, no signal of flow meter and solenoid open. Tap closed, low water fill pressure - Reset

Advice:

Tap closed, low water fill pressure - Reset
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

EH0

My washing Machine is displaying the error message "EH0"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

C1

My Washing Machine shows the error code "C1"

Issue:

The difficulties you are facing may be due to different causes.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

C2

My washing machine shows error "C2"

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

My washing machine shows an error

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

My washing machine showed an error and did not pump off the water

Issue:

The difficulties you are facing may be due to different causes. Please use our troubleshooter for an appropriate investigation.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.

F01

Electronic circuit board fault

Issue:

Washing machine is not operating – some or all functions are not selectable.

Advice:

We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again. If the problem persists, please arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F02

Motor circuit fault

Issue:

Intermittent or no drum rotation during wash cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F03

Temperature sensing fault

Issue:

Washing machine not heating on wash or dry settings.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F05

Waste pipe blockage or pump issue

Issue:

Washing machine door will not open / the door can be opened but water remains inside the drum.

Advice:

Please check for blockages in your pump filter (if applicable to model – please see user handbook). Also check for any blockages in waste water hose and in any under-sink plumbing. If none of the above solutions work, it is likely you have a pump failure and will need further assistance. If the problem persists, please arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F06

Door lock fault

Issue:

Washing machine door cannot be opened or closed / when the door is closed the machine the programme will not start.

Advice:

If your washing machine door will not close, please check for any obstructions in the door lock. If the problem persists, please arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F07

Electronic circuit board fault / heating circuit fault

Issue:

During a wash cycle the programme pauses part way through / the machine is not heating and the pump runs continuously.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F08

Heater fault

Issue:

During a wash cycle the programme pauses part way through.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F09

Software fault

Issue:

Washing machine isn’t operating multiple flashing lights and/or display. Unable to select a programme.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F11

Pump circuit fault

Issue:

Water remains in washing machine / not pumping out.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F12

Electronic control fault

Issue:

Washing machine is not operating (turning on).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F13

Dryer temperature sensing fault (washer dryers only)

Issue:

Washer dryer is not drying clothes.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F15

Heater control fault (washing machines and washer dryers)

Issue:

Washing machine is not heating water or pauses during a wash cycle / not drying or pauses during drying cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F16

Drum lock position sensor fault (top loading machines only)

Issue:

Washing machine drum is stopping in the wrong position or is not locked in the correct position.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F18

Internal data error

Issue:

Some or all display / functions do not work on my washing machine.

Advice:

Please disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply, wait 30 seconds and try starting the machine again.
If the problem persists, please arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F19

Fan motor or heating fault (washer dryers only)

Issue:

Washing machine is not drying / stops during drying cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washing Machine Repairs in London.

F01

Motor circuit fault

Issue:

...

Advice:

We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.
If the fault still remains then please arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F02

Motor fault – open or short circuit

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F03

Front thermostat fault

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F04

Rear thermostat fault

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F08

Heater – open or closed circuit fault

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F09

Controller set-up file error

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F12

Control module communication error

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F13

Air Duct thermostat overheating

Issue:

...

Advice:

Please check the machine’s filter is clean and the air flow for blockages. Lastly check the machines plinth and air vents are not restricted or blocked.
If the fault does not clear, please arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F14

Rear thermostat over heating

Issue:

...

Advice:

Please check the machine’s filter is clean and the air flow for any blockages. Lastly, check the machines Plinth and air vents are not restricted or blocked. If you have a vent hose then please check for any blockage/damage or restriction.
If the fault does not clear, We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Tumble Dryer Repairs in London.

F01

Electronic circuit board fault

Issue:

Washer dryer is not operating – some or all functions are not selectable.

Advice:

We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.
If the fault still remains then please arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F02

Motor circuit fault

Issue:

Intermittent or no drum rotation during wash cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F03

Temperature sensing fault

Issue:

Washer dryer not heating on wash or dry settings.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F05

Waste pipe blockage or pump issue

Issue:

Washer dryer door will not open / the door can be opened but water remains inside the drum.

Advice:

Please check for blockages in your pump filter (if applicable to model – please see user handbook) Also check for any blockages in waste water hose and in any under-sink plumbing. If none of the above solutions work, it is likely you have a pump failure and will need further assistance.
If the fault still remains then please arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F06

Door lock fault

Issue:

Washer dryer door cannot be opened or closed / when the door is closed the machine the programme will not start.

Advice:

Please check for any obstructions in the door lock if door won’t close.
If the fault still remains then please arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F07

Electronic circuit board fault / heating circuit fault

Issue:

During a wash cycle the programme pauses part way through / the machine is not heating and the pump runs continuously.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F08

Heater fault

Issue:

During a wash cycle the programme pauses part way through.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F09

Software fault

Issue:

Washer dryer is not operating multiple flashing lights and/or display. Unable to select a programme.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F11

Pump circuit fault

Issue:

Water remains in washer dryer / not pumping out.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F12

Electronic control fault

Issue:

Washer dryer is not operating (turning on).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F13

Dryer temperature sensing fault (washer dryers only)

Issue:

Washer dryer is not drying clothes.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F15

Heater control fault (washing machines and washer dryers)

Issue:

Washer dryer is not heating water or pauses during a cycle programme / not drying – pauses during drying cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F16

Drum lock position sensor fault (top loading machines only)

Issue:

Washer dryer drum is stopping in the wrong position or is not locked in the correct position.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F18

Internal data error

Issue:

Some or all display or functions do not work on my washer dryer.

Advice:

Please disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply, wait 30 seconds and try starting the machine again.
If the fault still remains then please arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F19

Fan motor or heating fault (washer dryers only)

Issue:

Washer dryer is not drying / stops during drying cycle.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Washer Dryer Repairs in London.

F01

Anti-flooding overflow

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: OFF
• LED 3: OFF
• LED 4: OFF

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F02

Water fill solenoid valve failure

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: OFF
• LED 2: ON
• LED 3: OFF
• LED 4: OFF

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F03

Water drain failure/ timeout

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: ON
• LED 3: OFF
• LED 4: OFF

Advice:

We recommend you check that the drain pipe and under sink plumbing for any blockages. If the fault persists, please arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F04

Thermostat fault

Issue:

The LED lights on your dishwasher are displaying in the following sequence.

• LED 1: OFF
• LED 2: OFF
• LED 3: ON
• LED 4: OFF

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F06

Water fill timeout

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: OFF
• LED 2: ON
• LED 3: ON
• LED 4: OFF

Advice:

Please check that the water supply is present and of sufficient pressure, also that the tap is fully on and that the fill hose is not restricted. If the fault persists, please arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F07

Water turbine damaged

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: ON
• LED 3: ON
• LED 4: OFF

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F08

Temperature timeout fault

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: OFF
• LED 2: OFF
• LED 3: OFF
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F09

Software error

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: OFF
• LED 3: OFF
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F10

Heating element fault

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: OFF
• LED 2: ON
• LED 3: OFF
• LED 4: ON

Advice:

Please check to see if your door is closed properly. If the fault persists, please arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F11

Wash pump failure

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: ON
• LED 3: OFF
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F12

Main board & Display communication error

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: OFF
• LED 2: OFF
• LED 3: ON
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F13

Main board fault

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: OFF
• LED 3: ON
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

F15

Virtual sensor error

Issue:

The LED lights on your dishwasher are displaying in the following sequence

• LED 1: ON
• LED 2: ON
• LED 3: ON
• LED 4: ON

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Dishwasher Repairs in London..

E1

Refrigerator sensor fault

Issue:

Refrigerator sensor fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E2

Freezer sensor fault

Issue:

The compartment temperature in my Freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E3

Defrost sensor fault

Issue:

The compartment temperature in my Fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E4

Fridge defrost sensor fault

Issue:

The compartment temperature in my fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E5

Freezer defrost sensor fault

Issue:

The compartment temperature in my freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E6

Main control-board and display board fault

Issue:

The display or controls on my appliance are not operating correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E7

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E8

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E9

Freezer high temperature alarm

Issue:

The freezer door may have been left open which has resulted in the food in freezer defrosting.

Advice:

Please check to see if your door is closed properly. If this fault indicator occurs again, please arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E0

Ice maker fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

EE

Ice maker circuit fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Freezer Repairs in London..

E1

Refrigerator sensor fault

Issue:

...

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E2

Freezer sensor fault

Issue:

The compartment temperature in my Freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E3

Defrost sensor fault

Issue:

The compartment temperature in my Fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E4

Fridge defrost sensor fault

Issue:

The compartment temperature in my fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E5

Freezer defrost sensor fault

Issue:

The compartment temperature in my freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E6

Main control-board and display board fault

Issue:

The display or controls on my appliance are not operating correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E7

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E8

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E9

Freezer high temperature alarm

Issue:

The freezer door may have been left open which has resulted in the food in freezer defrosting.

Advice:

Please check to see if your door is closed properly.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E0

Ice maker fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

EE

Ice maker circuit fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Fridge Repairs in London.

E1

Refrigerator sensor fault

Issue:

Refrigerator sensor fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E2

Freezer sensor fault

Issue:

Freezer sensor fault. The compartment temperature in my Freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E3

Defrost sensor fault

Issue:

Defrost sensor fault. The compartment temperature in my Fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E4

Fridge defrost sensor fault

Issue:

Fridge defrost sensor fault. The compartment temperature in my fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E5

Freezer defrost sensor fault

Issue:

Freezer defrost sensor fault. The compartment temperature in my freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E6

Main control-board and display board fault

Issue:

Main control-board and display board fault. The display or controls on my appliance are not operating correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E7

Environmental temperature sensor fault

Issue:

Environmental temperature sensor fault. A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E8

Environmental temperature sensor fault

Issue:

Environmental temperature sensor fault. A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E9

Freezer high temperature alarm

Issue:

Freezer high temperature alarm. The freezer door may have been left open which has resulted in the food in freezer defrosting.

Advice:

Please check to see if your door is closed properly. If the fault persists, please arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit

E0

Ice maker fault (if fitted)

Issue:

Ice maker fault (if fitted). The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

EE

Ice maker circuit fault (if fitted)

Issue:

Ice maker circuit fault (if fitted). The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Indesit Freezer Repairs in London.

E1

Refrigerator sensor fault

Issue:

Refrigerator sensor fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E2

Freezer sensor fault

Issue:

The compartment temperature in my Freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E3

Defrost sensor fault

Issue:

The compartment temperature in my Fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E4

Fridge defrost sensor fault

Issue:

The compartment temperature in my fridge is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E5

Freezer defrost sensor fault

Issue:

The compartment temperature in my freezer is incorrect.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E6

Main control-board and display board fault

Issue:

The display or controls on my appliance are not operating correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E7

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E8

Environmental temperature sensor fault

Issue:

A number of things affecting the temperature in your appliance could be happening if you see this error code displayed.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

E9

Freezer high temperature alarm

Issue:

The freezer door may have been left open which has resulted in the food in freezer defrosting.

Advice:

Please check to see if your door is closed properly. If the fault still remains then we recommend you call our customer service centre to book a Hotpoint engineer on 0208 226 3633

E0

Ice maker fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.

EE

Ice maker circuit fault (if fitted)

Issue:

The ice maker in my appliance is not working correctly.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Hotpoint Freezer Repairs in London.