1-1

The electronic control board detects a stuck relay on its circuit board

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

1-2

Failed or incompatible electronic control board

Issue:

The code appears if you install the wrong electronic control board. Order and install the correct electronic control board for your model of dishwasher. If the code appears and you didn't just replace the electronic control board, shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

2-1

The electronic control board detected a stuck key on the control panel.

Issue:

See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-1

Either there's a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-2

The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-3

OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water)

Issue:

Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

4-3

The electronic control board does not detect motor operation

Issue:

Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is okay, replace the wash pump. If the problem continues, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

5-1

Door won't latch shut

Issue:

Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

5-2

Door won't open

Issue:

Check the wiring in the door switch. If the wiring is undamaged, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-1

The electronic control board doesn't detect water entering the dishwasher tub.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-2

Water inlet valve has an electrical problem.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-3

Suds or air are in the water pump

Issue:

Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there's excessive sudsing, check the detergent dispenser and replace if it's damaged

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-4

The float switch is open

Issue:

Check the overfill float switch to see if it's stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-6

Incoming water is too cold

Issue:

Use an accurate thermometer to check the water temperature. If it's lower than 110 degrees F, check your water heater. water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-7

Disconnected or damaged flow meter

Issue:

Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-8

Water softener regeneration valve electrical problem (Water Softener Models Only)

Issue:

Shut off power to the dishwasher. Check the wiring for the regeneration valve. Reconnect any loose wires. Replace the wire harness if damaged. Replace the regeneration valve if the wiring is okay. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

7-1

Heating element doesn't work

Issue:

Shut off power to the dishwasher. Inspect the heating element and replace it if it's visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

7-2

Heating element won't shut off

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

8-1

Slow drain

Issue:

Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

8-2

Drain pump electrical problem

Issue:

Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

8-3

Drain pump stuck on

Issue:

Shut off power to the dishwasher and check the drain pump wiring. Replace the wire harness if damaged. If the wiring is okay, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

9-1

Electronic control board can't detect the position of the diverter

Issue:

The diverter directs the water through the lower spray arm or the upper spray arm. Turn off power to the dishwasher and then check the wiring going to the diverter motor. If the wiring is intact, replace the diverter.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

9-2

Diverter is stuck on

Issue:

Remove the lower dishrack and the lower spray arm. Disassemble the sump. Check the diverter disk and replace if visibly damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

9-3

Diverter disk is missing

Issue:

Remove the lower dishrack and the lower spray arm. Disassemble the sump. Check to see if the diverter disk is missing. If the disc is missing, install a new disk.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-1

Dispenser electrical problem

Issue:

Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, it could have a defective detergent dispenser or electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-2

Vent wax motor electrical problem

Issue:

Shut off power to the dishwasher. Check the wiring in the vent wax motor circuit. If the wiring is intact, it could have a defective vent wax motor or electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-3

Drying fan problem

Issue:

Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, could have a defective drying fan or electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

1-1

The electronic control board detects a stuck relay on its circuit board.

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

1-2

Damaged or corrupted memory on control board. Incompatible software components inside microprocessor.

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

2-1

The electronic control board detected a stuck key on the control panel.

Issue:

See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

2-2

The electronic control board detects no communication from the control panel.

Issue:

See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-1

Either there's a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-2

The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

3-3

OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water)

Issue:

Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

4-1

No communication between the electronic control board and the wash pump motor

Issue:

Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

4-2

Communication error between the electronic control board and the wash pump motor

Issue:

Shut off power to the dishwasher and then check the wiring from the control board to the wash pump motor. If the wiring is undamaged, replace the wash pump. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

5-1

Door won't latch shut

Issue:

Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

5-2

Door won't open

Issue:

Check the wiring in the door switch. If the wiring is undamaged, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-1

The electronic control board doesn't detect water entering the dishwasher tub.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-2

Water inlet valve has an electrical problem.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-3

Suds or air are in the water pump

Issue:

Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there's excessive sudsing, check the detergent dispenser and replace if it's damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-4

The float switch is open

Issue:

Check the overfill float switch to see if it's stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-6

Incoming water is too cold

Issue:

Use an accurate thermometer to check the water temperature. If it's lower than 110 degrees F, check your water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-7

Disconnected or damaged flow meter

Issue:

Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

6-8

Problem with water softener regeneration valve

Issue:

Shut off power to the dishwasher. Check the wiring to the water softener regeneration valve. If the wiring is intact, replace the water softener regeneration valve.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

7-1

Heating element doesn't work

Issue:

Shut off power to the dishwasher. Inspect the heating element and replace it if it's visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

7-2

Heating element won't shut off

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

8-1

Slow drain

Issue:

Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

8-2

Drain pump electrical problem

Issue:

Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

9-1

Electronic control board can't detect the position of the diverter

Issue:

The diverter directs the water through the lower spray arm or the upper spray arm. Turn off power to the dishwasher and then check the wiring going to the diverter motor. If the wiring is intact, replace the diverter.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

9-2

Diverter is stuck on

Issue:

Remove the lower dishrack and the lower spray arm. Disassemble the sump. Check the diverter disk and replace if visibly damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-1

Dispenser electrical problem

Issue:

Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, replace the detergent dispenser.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-2

Vent wax motor electrical problem

Issue:

Shut off power to the dishwasher. Check the wiring in the vent wax motor circuit. If the wiring is intact, replace the vent wax motor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

10-3

Drying fan problem

Issue:

Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, replace the drying fan.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F1

NTC break

Issue:

Temperature out of the normal value (-3°C till +85°C) / 1 Flash - NTC or thermistor open circuit

Advice:

1. Temperature inside higher than +85°C. 2. NTC defective (the NTC is the most common cause of this error and can be obtained from this link). 3. Dishwasher is frozen, less than -3°C. If the temperature is less than -3°C, fill the appliance with a cup of warm water to warm it up before you start it. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F2

Water Leakage

Issue:

Water is in the bottom tray / 2 Flashes - Water leak detected

Advice:

Floater or float switch switches off the water valve and the electronic switches on the drain pump until pressure sensor reports that it is empty. There are numerous causes for this fault, but it all usually comes down to the fact that something, somewhere is leaking. To cure this you need to find the leak. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F3

Dishwasher Heating System Defective / 3 Flashes - Heating system defective

Issue:

Indicated after approximately 25 minutes of failure to reach operating temperature.

Advice:

1. Heats too slowly (less than 1,5 °C in 10 min). 2. Water heater or heating element is defective (this is the most common cause of this issue and the heating element is available from this link). 3. Relays (RE2) on control board (CB) is defective. 4. NTC - resistance fluctuation (the NTC or thermostat sensor, as noted above, can be found from this link). Check the heating element first if you get this error. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F4

Dishwasher Draining Failure / 4 Flashes - Failure to drain out

Issue:

Drain pump starts and after 4 min the machine detects that it is “not empty”

Advice:

1. Drain pump defective. 2. Siphon closed. 3. Control board defective (very rare!). 4. OWl/WI defective (Optical sensors, if fitted, but most don't have them). The most common cause of this is either a blocked or defective drain pump. On that front you have two choices, you can either go with the genuine dishwasher drain pump from this link or, you can opt for a much, much cheaper compatible drain pump from this link. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F5

5 Flashes - Rotor or spray arm blocked

Issue:

5 Flashes Rotor or spray arm blocked

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F6

Water Tap Closed

Issue:

Water valve is switched on but flow meter sends no impulses and the water indicator is off / 6 Flashes - No incoming water

Advice:

1. Water inlet tap closed. 2. Water inlet hose blocked. 3. Water inlet valve defective (common enough issue but also check the flow meter in the side chamber, the water valve is here if required). 4. Flow meter detective. It is a very common issue with these dishwashers and the common flow meter is built into the side chamber which can be accessed by removing the right hand side panel (looking from the front of the dishwasher) and the commonly used spare part can be found from this link. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F7

Flow Meter Failure

Issue:

Water inlet valve is switched on and the water indicator is on. / 7 Flashes - Flow meter failure

Advice:

1. Flow meter sends too few impulses (less than 10 imp. in 10 sec.). 2. Water tap closed during water inlet. 3. Water inlet hose blocked. 4. Water inlet valve defective. 5. Flow meter defective. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F8

Water Level Failure

Issue:

Failures are supervised over the whole program. Mechanical water indicator WI Spray pump works, the WI switches more than 20 times in 2 minutes back / 8 Flashes - Water level fault

Advice:

Optical Water Indicator. Always after the OWI - signal is missing the electrical components are turned off for 5 sec. If after the 5 sec. the OWl-Signal is still not present then it notes a failure F8. If, however, after the 5 sec the OWl-Signal is present, then the water-level is filled to 6 Ltr. and the electrical components are again turned on. After the OWl signal is missing for a second time note an F8 failure. 1. Water inlet defect? Should switch on after approximately a 1 litre intake of water. 2. Filter blocked. 3. Water foaming giving false reading. 4. Pot has turned off and is filled with spray water. 5. No stable spray pump working, main wash motor faulty. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F9

Continuous Water Inlet / 9 Flashes - ontinuous water inlet

Issue:

Water inlet valve is switched off, water indicator on, flow meter sends impulses (more than 10 imp. in 10 sec.)

Advice:

1. Water inlet valve mechanically not closed. 2. Triac on the control board permanently switched on. (short circuit). Reaction: interval 30 sec. drain pump on / 20 sec. drain pump off in interval. The main control boards are model specific, if you want to buy one please contact us with the model number and the 12NC number from the rating plate just inside the door of the dishwasher to ensure that you get the correct one. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

F0

Sensor failure, only displayed in test program

Issue:

10 Flashes - Sensor failure, only displayed in test program

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

FA

Optical water indicator (Turbidity Sensor)

Issue:

11 Flashes - Optical water indicator (Turbidity Sensor)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

FB

Motorised diverter valve

Issue:

12 Flashes - Motorised diverter valve

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

FC

Water hardness sensor failure

Issue:

13 Flashes - Water hardness sensor failure

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Clean light blinks 7 times

Heater circuit failure. Control didn't detect the expected rise in water temperature.

Issue:

Check the heating element and related components (wiring and control board) in that circuit.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Console light blinks rapidly

The control detects a stuck button on the control panel.

Issue:

A failed control panel or a malfunctioning electronic control board can cause this code. Check the buttons on the control panel using a volt/ohm meter. In most cases, the control panel must be replaced. If that doesn't solve the problem, the electronic control board might be at fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Start/Resume light blinks slowly

If the dishwasher door is opened or power is interrupted during the cycle, the dishwasher won't start again until the door is detected as closed and the Start/Resume button is pressed.

Issue:

Check the door latch and switch assembly. A failure in the Start/Resume button also can cause this problem.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Clean light stays on

The dishwasher won't start a new cycle unless it detects that the door opened after the previous cycle.

Issue:

Turn off power to the dishwasher by shutting off the breaker and restarting. If that does not work, the door switch assembly is stuck and must be replaced.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Control lock LED is on but not accepting key presses

Accidentally turned on or control detected keypad problem.

Issue:

Press the Heated Dry key for 5 seconds to turn off control lock feature. If that doesn't work, replace keypad.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

Sanitized LED blinks at end of cycle

Control couldn't confirm that the dishes were sanitized.

Issue:

Check voltage to the dishwasher and the temperature of incoming water. Check the diverter motor, the heater and the OWI/thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Dishwasher Repairs in London.

tE

Thermistor (water temperature sensor) is defective

Issue:

Unplug the dishwasher and reconnect any loose wires on the thermistor wire harness. Replace the wire harness if damaged. If the wire harness is okay, replace the thermistor. If the problem persists, replace the main power board assembly (PBA).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

HE

Heater failure

Issue:

Unplug the dishwasher and check the wiring connections on the heater. Replace the heater if it’s damaged. If the heater is okay, replace the main PBA.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

IE or 3E

Water entering the dishwasher is more than 176 degrees F

Issue:

If the temperature of the hot water at your kitchen faucet is more than 120 degrees, lower the setting on the water heater. If the water temperature in the tub is below 176 degrees, the thermistor (temperature sensor) is defective; replace the thermistor. If the problem persists, replace the main PBA.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

9E

Low water level

Issue:

Empty dishes that filled with water and restart the cycle. Adjust the leveling feet if the dishwasher isn’t level. Reconnect any loose wires on the wire harness for the water level sensor. Replace the wire harness if damaged. If the wire harness connections are okay, replace the water level sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

PE

Half-load component failure

Issue:

Unplug the dishwasher and reconnect any loose wires on the distributor plate motor and micro-switch. Replace the wire harness if damaged. If the wires are okay, replace the distributor motor assembly, which includes the distributor plate motor and the micro-switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

4E

No water detected in the tub for 6 minutes after starting the dishwasher

Issue:

Fully open the water supply cut-off valve for the dishwasher. If the valve is already open, unplug the dishwasher and shut off the water supply, and then disconnect the fill line and examine the water inlet valve. If the inlet screen is clogged, replace the water valve—don’t just clean the screen, because debris could enter the valve body, causing the valve to stay open, resulting in flooding. Check the wiring connections on the water inlet valve and secure any loose connections. If the water valve won't open when activated, replace it.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

5E

Not draining or not draining fast enough

Issue:

Clear clogs from the sink drain. Unplug the dishwasher and clear clogs from the dishwasher drain hose and drain pump. If the drain hose or the drain pump is damaged, replace it.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

oE

Water overflow detected

Issue:

Unplug the dishwasher or shut off the house circuit breaker for the dishwasher to disconnect electrical power. If water continues to fill the tub, replace the water inlet. If filling stops when you disconnect power, replace the main PBA.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

LE

Water leak detected

Issue:

Check for a water leak under the dishwasher. Examine the hoses, drain pump and tub. Replace any leaking components.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

6E

Stuck button

Issue:

Press all the buttons on the control panel to attempt to free the stuck key. If the key remains stuck, replace the control panel.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

dE

Door latch defective

Issue:

Check the door latch operation. Unplug the dishwasher or disconnect the power and reconnect any loose wires on the door latch. Replace the wire harness if damaged. Replace the door latch if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

CE

Communication failure

Issue:

Unplug the dishwasher and reconnect any loose wires on the main PBA and the control panel. Replace the main PBA or the control panel if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

tE

Thermistor (temperature sensor) defective

Issue:

Unplug the dishwasher and reconnect any loose wires on the on the thermistor wire harness. Replace the wire harness if damaged. If the wire harness is okay, replace the thermistor. If the problem persists, replace the main power board assembly (PBA).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

HE1

Heater failure

Issue:

Unplug the dishwasher and check the wiring connections on the heater. Replace the heater if it’s damaged. If the heater is okay, replace the main PBA.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

HE

Water temperature too high

Issue:

Unplug the dishwasher and reconnect any loose wires on the on the thermistor wire harness. Replace the wire harness if damaged. If the wire harness is okay, replace the thermistor. If the problem persists, replace the heater.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

bE2

Stuck button on the control panel

Issue:

Press all the buttons on the control panel to attempt to free the stuck key. If the key remains stuck, replace the control panel.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

bE3, AE, 3E or AE6

Communication failure

Issue:

Unplug the dishwasher and reconnect any loose wires on the main PBA and the control panel. Replace the main power board or the control panel if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

LE

Water leak detected

Issue:

Check for a water leak under the dishwasher. Examine the hoses, drain pump and tub. Replace any leaking components.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

OE

Water overflow detected

Issue:

Unplug the dishwasher or shut off the house circuit breaker for the dishwasher to disconnect electrical power. If water continues to fill the tub, replace the water inlet. If filling stops when you disconnect power, replace the main PBA.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

1E

Low water level

Issue:

Empty dishes that filled with water and restart the cycle. Adjust the leveling feet if the dishwasher isn’t level. Reconnect any loose wires on the wire harness for the water level sensor. Replace the wire harness if damaged. If the wire harness connections are okay, replace the water level sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

4E5

No water detected in the tub after starting the dishwasher

Issue:

Fully open the water supply cut-off valve for the dishwasher. If the valve is already open, unplug the dishwasher and shut off the water supply, and then disconnect the fill line and examine the water inlet valve. If the inlet screen is clogged, replace the water valve—don’t just clean the screen, because debris could enter the valve body, causing the valve to stay open, resulting in flooding. Check the wiring connections on the water inlet valve and secure any loose connections. If the water valve won't open when activated, replace it.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

9E1

High or low voltage supply

Issue:

Have an electrician check the voltage supply for the dishwasher and resolve any problems.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

7E

Water wall vane motor error

Issue:

Remove the packing tape on the water wall vane if not removed during installation. Reconnect any loose wires on the water wall vane motor and vane sensor. Replace the wire harness if damaged. Replace the water wall vane motor or vane sensor if defective.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Dishwasher Repairs in London.

1-1

The electronic control board detects a stuck relay on its circuit board

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, have a service technician check the wiring and components. If the wiring and components are in working order, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

1-2

All the LED's are on because the user interface control is incompatible with the electronic control board

Issue:

The code appears when you install the wrong user interface control. Order and install the correct user interface control for your model of dishwasher.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

2-1

The electronic control board detected a stuck key on the control panel.

Issue:

See if any keys work. If no keys work or the control panel is damaged, replace the electronic control panel. If the control panel works, the problem might be with the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

2-2

User interface control can't communicate with electronic control board

Issue:

Shut off power to the dishwasher. Check the wiring between the user interface control and the electronic control board. If the wires and connections are okay, replace the user interface control board. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

3-1

Either there's a break in the wiring or the thermistor/OWI component failed. (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

3-2

The thermistor/OWI circuit is electrically shorted, (The thermistor is the water temperature sensor, the OWI is the Optical Water Indicator that detects the amount of debris in the water.)

Issue:

Shut off power to the dishwasher and then check the wiring for the thermistor/OWI circuit. If the circuit wiring is undamaged, replace the thermistor/OWI component.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

3-3

OWI fails (the OWI is the Optical Water Indicator that detects the amount of debris in the water)

Issue:

Shut off power to the dishwasher and clean the OWI. If the code resumes when you restore power, replace the OWI

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

4-3

No communication between the electronic control board and the wash pump motor

Issue:

Shut off power to the dishwasher and check the wiring from the control board to the wash pump motor. If the wiring is okay, replace the wash pump. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

5-1

Door won't latch shut

Issue:

Press the Start button and immediately close the door. If the code continues, shut off power to the dishwasher and check the door latch mechanism and the wiring attached to the door switch. If the latch mechanism and the wiring are intact, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

5-2

Door won't open

Issue:

Check the wiring in the door switch. If the wiring is undamaged, replace the door switch.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-1

The electronic control board doesn't detect water entering the dishwasher tub.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-2

Water inlet valve has an electrical problem.

Issue:

Shut off power and then water to the dishwasher. Check the water supply for proper flow and pressure. Check the wiring to the water inlet valve. If the wiring and the water supply are in working order, replace the water inlet valve. If the problem continues, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-3

Suds or air are in the water pump

Issue:

Check the water fill level and check for suds in the fill water at the bottom of the tub. if the fill level is too low, replace the water inlet valve. If there's excessive sudsing, check the detergent dispenser and replace if it's damaged

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-4

The float switch is open

Issue:

Check the overfill float switch to see if it's stuck or if an item is stuck under it. Check if the inlet water fill valve is properly shutting off the water supply when the dishwasher is off.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-6

Incoming water is too cold

Issue:

Use an accurate thermometer to check the water temperature. If it's lower than 110 degrees F, check your water heater. water heater. If the water temperature is normal (110 to 120 degrees F), replace the thermistor/OWI or the electronic control board. Refer to the tech sheet for your dishwasher for a diagnostic test for the thermistor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-7

Disconnected or damaged flow meter

Issue:

Shut off power to the dishwasher. Check the wiring to the flow meter. If the wiring is intact, replace the flow meter.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

6-8

Water softener regeneration valve electrical problem (Water Softener Models Only)

Issue:

Shut off power to the dishwasher. Check the wiring for the regeneration valve. Reconnect any loose wires. Replace the wire harness if damaged. Replace the regeneration valve if the wiring is okay. If the problem persists, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

7-1

Heating element doesn't work

Issue:

Shut off power to the dishwasher. Inspect the heating element and replace it if it's visibly damaged. If not, check the wiring to the heating element. If the wiring is intact, replace the heating element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

7-2

Heating element won't shut off

Issue:

Shut off power to the dishwasher for 5 minutes. If the code resumes when you restore power, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

8-1

Slow drain

Issue:

Shut off power to the dishwasher and then shut off water. Check the drain path for an obstruction. If the drain path is clear, check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

8-2

Drain pump electrical problem

Issue:

Shut off power to the dishwasher and then shut off water. Check the wiring on the drain pump. If the wiring is intact, replace the drain pump.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

8-3

Drain pump stuck on

Issue:

Shut off power to the dishwasher and check the drain pump wiring. Replace the wire harness if damaged. If the wiring is okay, replace the electronic control board.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

10-1

Dispenser electrical problem

Issue:

Shut off power to the dishwasher. Remove the outer door panel and check the wiring in the detergent dispenser circuit. If the wiring is intact, replace the detergent dispenser.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

10-3

Drying fan problem

Issue:

Shut off power to the dishwasher. Check the wiring in the drying fan circuit. If the wiring is intact, replace the drying fan.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Dishwasher Repairs in London.

F1

Water leak detected

Issue:

Shut off power to the dishwasher and remove the drawer(s). Check the lid seal, hoses and heater plate seal for leaks. Replace any leaking components.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel DishDrawer Repairs in London.

F2

Motor failure

Issue:

Check for an obstruction in the rotor. Remove any obstruction and check motor operation. Replace the motor if damaged. Shut off power to the dishwasher and check the motor wiring connections. Reconnect any loose wires. Replace the wire harness if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel DishDrawer Repairs in London.

F3

Water temperature too hot (above 185 F)

Issue:

Shut off power to the dishwasher and check the heating element. Replace the heating element if damaged. If the heating element is okay, then the electronic control heater relay likely is stuck. Replace the electronic control.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel DishDrawer Repairs in London.

F4

Water temperature not increasing

Issue:

Shut off power to the dishwasher and check the wiring connections on the heating element. If the wiring is ok, replace the heating element.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel DishDrawer Repairs in London.

F9

Electronic control failure

Issue:

Shut off power to the dishwasher for 30 seconds and then restore power. If the code returns after restore power, replace the electronic control.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel DishDrawer Repairs in London.

Er-01

Water leak detected

Issue:

A sensor under the dishwasher detected a leak. Shut off power to the dishwasher. Inspect all hoses, pumps and the tub to find the leak.

Advice:

Replace the leaking parts.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London..

Er-02

Thermistor/turbidity sensor failure

Issue:

Shut off power to the dishwasher and check the wiring for the thermistor/turbidity sensor circuit.

Advice:

If the wiring is okay, replace the thermistor/turbidity sensor.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-03

Wash motor failure

Issue:

Shut off power to the dishwasher and then check the wiring for the wash motor. If the wiring is okay, check for an obstruction in the pump.

Advice:

Replace the wash motor if the pump is clear and the wiring is okay.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-04 or Er-05

Upper fan/vent failure

Issue:

Shut off power to the dishwasher and check the wiring for the upper fan/vent.

Advice:

If the wiring is okay, replace the upper fan/vent.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-06

Lower fan failure

Issue:

Shut off power to the dishwasher and check the wiring for the lower fan.

Advice:

If the wiring is okay, replace the lower fan.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-07 or Er-11

Drain valve failure

Issue:

Shut off power to the dishwasher and check the wiring for the drain valve.

Advice:

If the wiring is okay, replace the drain valve.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-08

User interface control failure

Issue:

A switch on the user interface is defective.

Advice:

Replace the user interface.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-09

Communication failure between the user interface control and the electronic control board

Issue:

Shut off power to the dishwasher and check for loose wire connections between the user interface control and the electronic control board.

Advice:

If the wires and connections are intact, replace the user interface control. If the problem continues, replace the electronic control board.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-10

Electronic control board relay failure

Issue:

A relay on the electronic control board failed.

Advice:

Replace the electronic control board.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-12

Drain valve position error

Issue:

The drain valve activated when it should be off. Shut off power to the dishwasher.

Advice:

Check the drain valve wiring for a short. If the wiring is okay, replace the electronic control board because the drain valve relay likely is stuck. If the problem continues, replace the drain valve.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

Er-13

Electronic control board failure

Issue:

The electronic controlled board has an internal component failure.

Advice:

Replace the electronic control board.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Dishwasher Repairs in London.

F0

Default F code-no failure

Issue:

The F0 code displays if there are no previous fault codes and you hold the CANCEL key for 5 seconds. Press CANCEL to clear the display.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F1

Defective electronic oven control (EOC)

Issue:

Disconnect power or unplug the wall oven. Replace the electronic oven control (EOC).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F2/E0

Keypad wire harness is disconnected

Issue:

Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F2/E5 or F2/E6

CANCEL key is defective

Issue:

Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F3/E0

CANCEL key is defective

Issue:

Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F3/E0

Oven temperature sensor defective or an open oven temperature sensor circuit

Issue:

Disconnect power or unplug the wall ovenF. Reconnect the oven temperature sensor wire harness connection if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F3/E1

Oven temperature sensor defective or a shorted oven temperature circuit.

Issue:

Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire harness if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F3/E2

Oven temperature is more than over 575 degrees F in BAKE mode.

Issue:

Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire if loose. Replace the wire harness if damaged Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F3/E3

Oven temperature is too more than 950 degrees F in CLEAN mode

Issue:

Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F4/E1

Meat probe malfunction – shorted

Issue:

Disconnect power or unplug the wall oven. Unplug the meat probe and measure the resistance of the meat probe using a volt/ohm meter. If the resistance isn't 59000 ohms at room temperature, replace the meat probe. If the resistance of the meat probe is okay, insert the meat probe in the jack and check for a firm connection between the probe and jack in the oven. If the jack is damaged or worn out, replace it. Reconnect the wire harness connection on the meat probe jack if loose. Replace the wire harness if damaged.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F5/E0

Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door)

Issue:

Test the oven door switch operation using the oven light. Open and close the oven door to see if the oven door switch turns the oven light on and off when the oven door is opened and closed. If the oven door switch is defective, replace it. Disconnect power or unplug the oven. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Check the door lock assembly for visible damage and replace it if broken.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F5/E1

Self-clean latch won’t lock/unlock

Issue:

Disconnect power or unplug the wall oven. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Check the door lock assembly for visible damage and replace it if broken.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.

F1

Circuit board defective

Issue:

Circuit board defective

Advice:

Replace control board

F2

Faulty Electronic Oven Control

Issue:

1. The oven temp has risen above 665F and the door is not locked or 2. The temp has risen above 965F with the door locked

Advice:

1. Check oven temp in mode that failure occurred. Replace EOC (Electronic Oven Control) if above limits 2. Check 8-pin connector. Check and replace oven temperature sensor if necessary

F3

Oven temperature sensor is open (above 3000 ohms)

Issue:

Oven temperature sensor is open (above 3000 ohms)

Advice:

Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor and control

F4

Oven temperature sensor is shorted (below 500 ohms)

Issue:

Oven temperature sensor is shorted (below 500 ohms)

Advice:

Check resistance of oven temperature sensor, check for shorted wiring between oven temperature sensor and control

F5

Internal watchdog circuit has detected a failure

Issue:

Internal watchdog circuit has detected a failure

Advice:

Defective EOC (Electronic Oven Control)

F6

Shorted buttons

Issue:

Shorted buttons

Advice:

Check push buttons and dome switches on control

F8

Logic interrupted

Issue:

Logic interrupted (lock motor switch sequence)

Advice:

Check door lock switches and wiring

…

…

Issue:

…

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Frigidaire Oven Repairs in London.