F00

Drain pump triac failure

Issue:

• Check drainage pump or possible PCB failure
• Check drainage pump
• Check wiring

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

FH

No incoming water detected

Issue:

• Check water supply and hose
• Check water valves
• Check pressure switch

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

FA

Aquastop failure

Issue:

Check Aquastop switch

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

FP

Failure to drain

Issue:

• Check drainage pump filter for blockages
• Check blockage in the drain hose in waste system
• Check drainage pump
• Check pressure switch

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F5

NTC Sensor (thermistor) failure

Issue:

• Check thermistor (NTC)
• Check the wirings to thermistor and the PCB

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F6

Motor tacho not detected, no motor action

Issue:

• Check motor tachometer
• Check wiring and connections to the motor and PCB
• Check motor carbon brushes

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F7

Triac short circuit

Issue:

• Check electronic module

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F8

Heating element open circuit

Issue:

• Check continuity on heating element
• Check relay (if fitted)
• Check heating element wiring to PCB

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F9

Overflow

Issue:

• Check the amount of detergent being used to ensure that there has been no excessive foam
• Check pressure chamber
• Check pressure switch
• Check wiring to pressure sensor

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F10

Motor control unit or motor thermal safety operated

Issue:

• Check connections to circuit board (PCB)
• Check motor thermal cut out

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F11

Communications error

Issue:

• Check wiring between boards where more than one is fitted
• Check electronic control units (PCB)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F12

Heater element short circuit

Issue:

• Check water heating element
• Check relay if fitted
• Check wiring to heating element and PCB connection

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F13

Dispenser circuit fault- normally door lock related

Issue:

• Check door interlock
• Check wiring to door interlock and PCB connection

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

F14

EEPROM failure

Issue:

• Check electronic module (PCB)

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Washing Machine Repairs in London.

OE

The pump is blocked

Issue:

Error code OE on The LG washing machines simply means the pump is blocked. Presumably the water isn’t being emptied properly you might have something blocking the pump.

Advice:

As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this error means as far as the washing machine is concerned it thinks the water isn't pumping out. A pump, or filter blockage is the most common cause but it could be caused by other faults such as a faulty pump, or even a blockage in the drain hose near the sink waste or somewhere else in the system etc.
We offer fixed price LG Washing Machine Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

3E

Motor tacho fault

Issue:

3E error code is a Motor tacho fault detected. Can also be caused by be main PCB

Advice:

If the motor tacho signals are inputted less than 2 for 2 seconds after main drive motor started, this error will occur on normal brush motors and direct drive motors.

• Check carbon brushes if fitted
• Check motor capacitor
• Check motor
• Check motor tacho
• Check all connections and blocks to the motor
• Check connections on the main control module
• Check main control module

3E

Tacho error

Issue:

3E error code is a Motor tacho fault detected. Can also be caused by be main PCB

Advice:

Switch off the power/reconnect and try again. If error code persists a service call is advisable, switchboard (motherboard) replacement possible.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

3E1

DD Motor fault

Issue:

Check DD (Direct Drive) motor

Advice:

Service call advisable.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

3E2

DD Motor fault

Issue:

Check DD (Direct Drive) motor

Advice:

Service call advisable.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

3E3

DD Motor fault

Issue:

Check DD (Direct Drive) motor

Advice:

Service call advisable.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

3E4

DD Motor fault

Issue:

Check DD (Direct Drive) motor

Advice:

Service call advisable.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

HE or TE

Faulty heater element and Ntc sensor

Issue:

Usually the error code HE is shown by the machine, when there is a problem with the heating element or the NTC sensor attached to it.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Samsung Washing Machine Repairs in London.

4E and E1

Samsung washing machine Not filling in allocated time error code 4E and E1 Fault

Issue:

This is essentially a fill timeout error which will normally mean that either the water isn't on or that an inlet valve has failed or pressure switch problem check pipes as well. Water fill time out: The washing machine has failed to fill with water in a reasonable time.

Advice:

If there is no higher change in water frequency than 100Hz for 2 minutes during the initial time of water supply and if water level doesn't reach the preset level in 10 minutes, this error will occur. This error will be released using Start/Pause button, the washing machine will restart and attempt to fill with water again.

dE

Door Interlock fault

Issue:

Samsung washing machine DE Error code means that the door is open or you may have a fault with the lock. if the door is clearly closed but the machine think it is open, presumably because it’s not getting power passed from the door interlock.

Advice:

The first thing to check is that the door is closed properly. When the door is closed, the latch on the door pushes into the door interlock and slides a bar over, it should latch firmly and activate a part inside the lock. At this point the power is passed from one side of the door lock to the other and on to the rest of the machine.

5E

Why is '5E' Error displayed on the Washing Machine?

Issue:

This is essentially a fill timeout error which will normally mean that either debris blocking the pump (example coin, hair clip, bra wire. these are all common things that block the pump.)

Advice:

You can perform following steps to resolve the issue :

• Clean the debris filter.
• Make sure the drain hose is not clogged.To make it unclogged, Detach the drain hose from washing machine. Attach the spray nozzle to the end of the hose. Aim the sprayer into the clogged washer hose and spray water kinetically down the hose. Continue spraying until the hose is no longer clogged.
• Make sure the drain hose is not frozen.
• Make sure the drain hose is installed correctly.

5E or 2E

Samsung washing machine Not emptying in allocated time error code 5E or 2E Pump fault

Issue:

This is essentially a fill timeout error which will normally mean that either debris blocking the pump (example coin, hair clip, bra wire. these are all common things that block the pump.)

Advice:

These error codes for not draining point at a pump fault or blockage, first thing to do is check the pump filter but, on Samsung washing machines, the drain pump itself is often faulty.