Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Saturday, 23 July 2022
  0 Replies
  391 Visits
0
Votes
Undo
  Subscribe
The aforementioned unit was installed in 2014.
Two days ago on switching on, nothing appeared to happen, did not activate, none of the normal lights appeared.
I switched off at the mains, and switched back on, and everything functioned as normal
The following day on switching on, nothing happened, and after switching off, and switching back on, all the control panel stayed off. The delayed time of a couple of hours when switched off before switching back on was tried, but was unsuccessful.
On closer inspection, it was noted that when looking from directly above the control panel, a series of LED's were flashing.
1 above the Activate/ deactivate switch
1 above the Stop & Go switch
1 above the lock/ unlock switch
2 above the activate/ deactivate outer ring
4 above the Timer
2 below & one above the deactivate & activate the extreme right outer ring

Can anyone please advise what the possible problem could b?
Rate this post:
Colin Wade set the post as Critical priority — 1 year ago
Colin Wade set the type of the post as  Issue — 1 year ago
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
6 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
6 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...