Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Sunday, 29 January 2023
  0 Replies
  376 Visits
0
Votes
Undo
  Subscribe
Hi, I have an aging ADG211 slimline dishwasher which has been functioning very happilt for many years. It's just started flashing a fault half way through a wash cycle, when it then stops and drains the wash. 3 lights come on flashing - power, wash and end, as is in the photo attached. These just blink constantly and the cycle stops. The water empties, so no blockage and the pump is working. The heater is also working fine. I suspect it may be overfilling a little as there is a small leak from the front door and when opening in the cycle it looks very full at the bottom - fuller than usual and then leaks around the door hinge when closing the door again.

Looking at the fault code list on this website it seems to indicate either pump failure or main board failure (I'm not sure which one is LED 1 - the power or the wash). However, it doesn't seem like either of these are the issue. I suspect the fill level sensor has got blocked with gunk. Does this sound reasonable? If so, where is this sensor located?

Many thanks for any help

Jon dishwasher_fault.jpg
Attachments (1)
Rate this post:
Jon Brown set the post as normal priority — 1 year ago
Jon Brown set the type of the post as  Advice — 1 year ago
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
6 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
6 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...