How to clear Samsung Dryer error code E3?

If the E3 error code displays on your Samsung dryer, this means the dryer has sensed an overload. This error occurs when the dryer has an overload of clothing. This error may also occur when there are too many items in the dryer at once or there is a heavy imbalance in the dryer. The E3 error may also show if the dryer air vent hose is blocked or there is a problem with the thermistor. A faulty control board can also cause the E3 error code. Usually, this error code can be cleared by reconnecting loose wire connections on the main control board. The information below will show you how to troubleshoot and reset the Samsung dryer to clear the e3 error code.

Samsung Dryer E3 Error Code = Dryer Motor Overload

(For Samsung Dryers starting with “DV” Model number)



WHAT CAN CAUSE THE E3 ERROR CODE ON A SAMSUNG DRYER?

1. Overload error – Too much clothing in dryer at one time or imbalance.

REMOVE SOME CLOTHING FROM DRYER

2. Wiring – Wires – Wire Harness on the main control board or motor are loose.

CHECK ALL WIRING TO THE MAIN CONTROL BOARD AND THE MOTOR

3. The air vent hose may be blocked or clogged with lint.

CLEAN OUT LINT FILTER, VENT HOSE, WALL EXHAUST OPENING

4. Thermistor in Dryer is faulty.

REMOVE AND REPLACE THERMISTOR

5. Main control board is faulty.

REMOVE AND REPLACE MAIN CONTROL BOARD

Definition of the Samsung Dryer E3 Error Code:
The E3 fault code for Samsung Dryers indicates that the dryer senses the motor is overloaded.

This indicates there may be too many articles of clothing in the dryer at one time and the dryer “sees” it as overloaded.

When the dryer is “overfilled” or has an “imbalance”, the dryer will throw the E3 error code.

Remove some clothing and start the drying cycle once again to see if the error code E3 has cleared.