North London Appliance Repairs Domestic Appliance Repairs & Sales London Domestic Appliance Forum
Miele Washing Machine LED Display Error Codes:
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: The water inlet filter is clogged. (Water intake is blocked or restricted)
What To Check – How To Repair: Clean the water intake filter using the operating instructions.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: Water pressure is too low. (Water intake is blocked or restricted)
What To Check – How To Repair: Check water pressure to washer and home.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: Stopcock is not open. (Water intake is blocked or restricted)
What To Check – How To Repair:
-Stop the wash program using the operating instructions.
-Open the stopcock.
-Select the wash program and restart it.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: The inlet hose is kinked or bent. (Water intake is blocked or restricted)
What To Check – How To Repair: Check the inlet hose for kinks or bends.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The drain hose is too high.
What To Check – How To Repair: Make sure that the drain height is in the correct position.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The suds – drain fluff filter – drain pump are blocked.
What To Check – How To Repair:
– Clean the suds
– drain fluff filter
– drain pump as shown in the operating manual.
Miele Washing Machine Technical fault:
Shown On Miele Washer Display: An exclamation mark ! and “Technical fault” flashes in the display.
Possible Issue Or Problem: There is a technical fault.
What To Check – How To Repair: Remove and replace power, switch on and restart the program.
Miele Washing Machine WaterProof fault:
Shown On Miele Washer Display: An exclamation mark ! and “WaterProof fault” flashes in the display.
Possible Issue Or Problem: WaterProof system activated.
What To Check – How To Repair:
-Turn off the water supply to the washing machine at the stopcock.
-Disconnect from power.
-To remove contents of washer, refer to the “Opening the drum door in the event of a blocked drain outlet and/or power failure” in the manual.
Miele Washing Machine Stripes or Dashes in display:
Shown On Miele Washer Display: Display contrast not set to current lighting conditions.
What To Check – How To Repair: Reduce contrast. Refer to manual.
Miele Washing Machine The display is blank:
Shown On Miele Washer Display: The display switches off automatically in order to conserve energy = stand-by mode.
What To Check – How To Repair: Press any button to stop stand-by mode. Refer to Settings – Programmable Options, Stand-by mode, in the manual.
Miele Washing Machine The display is in a foreign language:
Possible Issue Or Problem: Incorrect language is set.
What To Check – How To Repair: The language can be modified as a programmable function via the Settings menu.
Miele Washing Machine The display requests entry of a PIN code:
Possible Issue Or Problem: The PIN function is active.
What To Check – How To Repair: Enter the correct PIN code and confirm. (The PIN code can be deactivated. Refer to the Settings – Programmable Options, Safety Lock in the manual.)
Miele Washing Machine 25% Load:
Shown On Miele Washer Display: The display shows 25% load when the washing machine is empty.
What To Check – How To Repair: This is the normal display when the washer is draining.
Miele Washing Machine F41 Error Code:
Shown On Miele Washer Display: The error message “F41” appears in the display with a program abort.
Possible Issue Or Problem: Fault in electronic controls.
What To Check – How To Repair: Turn the washer off for 15 seconds, then switch back on and try another wash cycle.
Miele Washing Machine beeps and says “Call Service”:
Shown On Miele Washer Display: The washing machine sounds an beep signal and “Call Service” is shown.
Possible Issue Or Problem: The drum lamp is not properly fitted.
What To Check – How To Repair:
Check that the drum lighting is in place and secure:
-Turn the appliance off and remove it from the electrical supply.
-Remove the yellow lever from behind the detergent drawer panel.
-Insert the lever into the slot in the drum lighting unit.
-Turn clockwise until you feel some resistance.
Miele Washing Machine Water inlet fault appears in display:
Shown On Miele Washer Display: Water inlet fault appears in display when machine is first used and machine will not spin.
What To Check – How To Repair:
-For safety, spinning is not possible until the machine has been prepared for using for the first time.
-The spin lock, programmed as standard, makes sure that spinning cannot be occur until a water intake has been connected.
-To start the spin function, a wash program without laundry & without detergent should be ran.
Miele Washing Machine display is blank – Start Stop does not illuminate:
Shown On Miele Washer Display: The display remains blank and the “Start/Stop” button does not illuminate.
Possible Issue Or Problem: There is no power.
What To Check – How To Repair:
-The washer plug is not connected.
-A fuse or circuit breaker has tripped.
-Make sure the door is closed.
Miele Washing Machine Indicator LED Lights Flash or Solid Error Codes:
Miele Washing Machine Start LED Light:
Shown On Miele Washer Display: The “Start” LED does not illuminate.
Possible Issue Or Problem: The door was not correctly closed.
What To Check – How To Repair: Press against the lock side of the drum door, then press the “Door button”.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The drain hose has been fitted too high.
What To Check – How To Repair: Make sure that the maximum drain height of 3ft is not exceeded.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The suds – drain fluff filter – drain pump are clogged.
What To Check – How To Repair: Clean the suds – drain fluff filter – drain pump as described in the manual.
Miele Washing Machine Soak – Pre-wash Flashing:
Shown On Miele Washer Display: “Soak/Pre-wash” – “Main wash” – “Rinse” or “Rinse hold” indicator is Flashing.
Possible Issue Or Problem: A technical fault.
What To Check – How To Repair:
-Turn the program selector to “Finish”.
-Turn the washing machine off.
-Turn the washing machine on again.
-Start a wash program.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Stopcock is not open.
What To Check – How To Repair:
-Stop wash program.
-Open the stopcock.
-Reselect and start program.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water inlet filter clogged.
What To Check – How To Repair: Clean water inlet filter as described in manual.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Inlet hose is kinked.
What To Check – How To Repair:
-Make sure there are are no kinks/loops in the inlet hose.
-In the event of a bad inlet hose, replace it.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water pressure is too low.
What To Check – How To Repair: Check water supply pressure to washer and home.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: The end of the drain hose is too high.
What To Check – How To Repair: Ensure that the maximum height of 3 ft is not exceeded.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Drain filter and or drain pump clogged.
What To Check – How To Repair: Clean the drain filter and the drain pump as per manual.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water protection system activated.
What To Check – How To Repair:
-Turn off water supply to washing machine at the stopcock.
-Disconnect the washer from the power.
-To remove the laundry, refer to the “Opening the drum door in the event of a blocked drain outlet and/or power failure” in the manual.
Miele Washing Machine Start/Stop Button Not Illuminating:
Shown On Miele Washer Display: The display is blank and the “Start/Stop” button does not illuminate.
Possible Issue Or Problem: There is no power.
What To Check – How To Repair:
-The main washer plug is not connected.
-The fuse or circuit breaker may have tripped.
-The washer door is not closed.
Miele Washing Machine Excess Detergent Flashing:
Shown On Miele Washer Display: Flashing “Excess detergent” or “Start” indicator.
Possible Issue Or Problem: Wrong detergent dispensing setting has been selected.
What To Check – How To Repair: Check detergent package and follow instructions.
Miele Washing Machine Excess Detergent Flashing:
Shown On Miele Washer Display: Flashing “Excess detergent” or “Start” indicator.
Possible Issue Or Problem: The lock on inner lid of top load washer is not engaged.
What To Check – How To Repair: Check that the lid lock has engaged.
Miele Washing Machine Drain Light Flashing:
Shown On Miele Washer Display: The “Drain” indicator light is flashing.
Possible Issue Or Problem: The end of the drain hose is too high.
What To Check – How To Repair: Ensure that the maximum head height of 3 ft is not exceeded.
Miele Washing Machine Drain Light Flashing:
Shown On Miele Washer Display: The “Drain” indicator light is flashing.
Possible Issue Or Problem: Drain filter and or drain pump blocked.
What To Check – How To Repair: Clean the drain filter and the drain pump per operating manual.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: Stopcock is not open. (Water intake is blocked or restricted)
What To Check – How To Repair:
-Stop the wash program in accordance with the manual.
-Open the stopcock.
-Select a wash program and restart.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: The inlet hose is kinked or bent. (Water intake is blocked or restricted)
What To Check – How To Repair: Check the inlet hose for bends or kinked areas.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: The water inlet filter is clogged. (Water intake is blocked or restricted)
What To Check – How To Repair: Clean the water intake filter in accordance with the manual.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: Water pressure is too low. (Water intake is blocked or restricted)
What To Check – How To Repair: Check water pressure to washer and home.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: The water inlet filter is clogged. (Water intake is blocked or restricted)
What To Check – How To Repair: Clean the water intake filter using the operating instructions.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: Water pressure is too low. (Water intake is blocked or restricted)
What To Check – How To Repair: Check water pressure to washer and home.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: Stopcock is not open. (Water intake is blocked or restricted)
What To Check – How To Repair:
-Stop the wash program using the operating instructions.
-Open the stopcock.
-Select the wash program and restart it.
Miele Washing Machine Water inlet fault:
Shown On Miele Washer Display: An exclamation mark ! and “Water inlet fault” is indicated in the display.
Possible Issue Or Problem: The inlet hose is kinked or bent. (Water intake is blocked or restricted)
What To Check – How To Repair: Check the inlet hose for kinks or bends.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The drain hose is too high.
What To Check – How To Repair: Make sure that the drain height is in the correct position.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The suds – drain fluff filter – drain pump are blocked.
What To Check – How To Repair:
– Clean the suds
– drain fluff filter
– drain pump as shown in the operating manual.
Miele Washing Machine Technical fault:
Shown On Miele Washer Display: An exclamation mark ! and “Technical fault” flashes in the display.
Possible Issue Or Problem: There is a technical fault.
What To Check – How To Repair: Remove and replace power, switch on and restart the program.
Miele Washing Machine WaterProof fault:
Shown On Miele Washer Display: An exclamation mark ! and “WaterProof fault” flashes in the display.
Possible Issue Or Problem: WaterProof system activated.
What To Check – How To Repair:
-Turn off the water supply to the washing machine at the stopcock.
-Disconnect from power.
-To remove contents of washer, refer to the “Opening the drum door in the event of a blocked drain outlet and/or power failure” in the manual.
Miele Washing Machine Stripes or Dashes in display:
Shown On Miele Washer Display: Display contrast not set to current lighting conditions.
What To Check – How To Repair: Reduce contrast. Refer to manual.
Miele Washing Machine The display is blank:
Shown On Miele Washer Display: The display switches off automatically in order to conserve energy = stand-by mode.
What To Check – How To Repair: Press any button to stop stand-by mode. Refer to Settings – Programmable Options, Stand-by mode, in the manual.
Miele Washing Machine The display is in a foreign language:
Possible Issue Or Problem: Incorrect language is set.
What To Check – How To Repair: The language can be modified as a programmable function via the Settings menu.
Miele Washing Machine The display requests entry of a PIN code:
Possible Issue Or Problem: The PIN function is active.
What To Check – How To Repair: Enter the correct PIN code and confirm. (The PIN code can be deactivated. Refer to the Settings – Programmable Options, Safety Lock in the manual.)
Miele Washing Machine 25% Load:
Shown On Miele Washer Display: The display shows 25% load when the washing machine is empty.
What To Check – How To Repair: This is the normal display when the washer is draining.
Miele Washing Machine F41 Error Code:
Shown On Miele Washer Display: The error message “F41” appears in the display with a program abort.
Possible Issue Or Problem: Fault in electronic controls.
What To Check – How To Repair: Turn the washer off for 15 seconds, then switch back on and try another wash cycle.
Miele Washing Machine beeps and says “Call Service”:
Shown On Miele Washer Display: The washing machine sounds an beep signal and “Call Service” is shown.
Possible Issue Or Problem: The drum lamp is not properly fitted.
What To Check – How To Repair:
Check that the drum lighting is in place and secure:
-Turn the appliance off and remove it from the electrical supply.
-Remove the yellow lever from behind the detergent drawer panel.
-Insert the lever into the slot in the drum lighting unit.
-Turn clockwise until you feel some resistance.
Miele Washing Machine Water inlet fault appears in display:
Shown On Miele Washer Display: Water inlet fault appears in display when machine is first used and machine will not spin.
What To Check – How To Repair:
-For safety, spinning is not possible until the machine has been prepared for using for the first time.
-The spin lock, programmed as standard, makes sure that spinning cannot be occur until a water intake has been connected.
-To start the spin function, a wash program without laundry & without detergent should be ran.
Miele Washing Machine display is blank – Start Stop does not illuminate:
Shown On Miele Washer Display: The display remains blank and the “Start/Stop” button does not illuminate.
Possible Issue Or Problem: There is no power.
What To Check – How To Repair:
-The washer plug is not connected.
-A fuse or circuit breaker has tripped.
-Make sure the door is closed.
Miele Washing Machine Indicator LED Lights Flash or Solid Error Codes:
Miele Washing Machine Start LED Light:
Shown On Miele Washer Display: The “Start” LED does not illuminate.
Possible Issue Or Problem: The door was not correctly closed.
What To Check – How To Repair: Press against the lock side of the drum door, then press the “Door button”.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The drain hose has been fitted too high.
What To Check – How To Repair: Make sure that the maximum drain height of 3ft is not exceeded.
Miele Washing Machine Drain fault:
Shown On Miele Washer Display: An exclamation mark ! and “Drain fault” is indicated in the display.
Possible Issue Or Problem: The suds – drain fluff filter – drain pump are clogged.
What To Check – How To Repair: Clean the suds – drain fluff filter – drain pump as described in the manual.
Miele Washing Machine Soak – Pre-wash Flashing:
Shown On Miele Washer Display: “Soak/Pre-wash” – “Main wash” – “Rinse” or “Rinse hold” indicator is Flashing.
Possible Issue Or Problem: A technical fault.
What To Check – How To Repair:
-Turn the program selector to “Finish”.
-Turn the washing machine off.
-Turn the washing machine on again.
-Start a wash program.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Stopcock is not open.
What To Check – How To Repair:
-Stop wash program.
-Open the stopcock.
-Reselect and start program.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water inlet filter clogged.
What To Check – How To Repair: Clean water inlet filter as described in manual.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Inlet hose is kinked.
What To Check – How To Repair:
-Make sure there are are no kinks/loops in the inlet hose.
-In the event of a bad inlet hose, replace it.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water pressure is too low.
What To Check – How To Repair: Check water supply pressure to washer and home.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: The end of the drain hose is too high.
What To Check – How To Repair: Ensure that the maximum height of 3 ft is not exceeded.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Drain filter and or drain pump clogged.
What To Check – How To Repair: Clean the drain filter and the drain pump as per manual.
Miele Washing Machine Inlet/Drain Flashing:
Shown On Miele Washer Display: Flashing or solid “Inlet/Drain” indicator.
Possible Issue Or Problem: Water protection system activated.
What To Check – How To Repair:
-Turn off water supply to washing machine at the stopcock.
-Disconnect the washer from the power.
-To remove the laundry, refer to the “Opening the drum door in the event of a blocked drain outlet and/or power failure” in the manual.
Miele Washing Machine Start/Stop Button Not Illuminating:
Shown On Miele Washer Display: The display is blank and the “Start/Stop” button does not illuminate.
Possible Issue Or Problem: There is no power.
What To Check – How To Repair:
-The main washer plug is not connected.
-The fuse or circuit breaker may have tripped.
-The washer door is not closed.
Miele Washing Machine Excess Detergent Flashing:
Shown On Miele Washer Display: Flashing “Excess detergent” or “Start” indicator.
Possible Issue Or Problem: Wrong detergent dispensing setting has been selected.
What To Check – How To Repair: Check detergent package and follow instructions.
Miele Washing Machine Excess Detergent Flashing:
Shown On Miele Washer Display: Flashing “Excess detergent” or “Start” indicator.
Possible Issue Or Problem: The lock on inner lid of top load washer is not engaged.
What To Check – How To Repair: Check that the lid lock has engaged.
Miele Washing Machine Drain Light Flashing:
Shown On Miele Washer Display: The “Drain” indicator light is flashing.
Possible Issue Or Problem: The end of the drain hose is too high.
What To Check – How To Repair: Ensure that the maximum head height of 3 ft is not exceeded.
Miele Washing Machine Drain Light Flashing:
Shown On Miele Washer Display: The “Drain” indicator light is flashing.
Possible Issue Or Problem: Drain filter and or drain pump blocked.
What To Check – How To Repair: Clean the drain filter and the drain pump per operating manual.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: Stopcock is not open. (Water intake is blocked or restricted)
What To Check – How To Repair:
-Stop the wash program in accordance with the manual.
-Open the stopcock.
-Select a wash program and restart.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: The inlet hose is kinked or bent. (Water intake is blocked or restricted)
What To Check – How To Repair: Check the inlet hose for bends or kinked areas.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: The water inlet filter is clogged. (Water intake is blocked or restricted)
What To Check – How To Repair: Clean the water intake filter in accordance with the manual.
Miele Washing Machine Inlet Light Flashing:
Shown On Miele Washer Display: The “Inlet” indicator light is flashing.
Possible Issue Or Problem: Water pressure is too low. (Water intake is blocked or restricted)
What To Check – How To Repair: Check water pressure to washer and home.
There are no replies made for this post yet.
Ask a Question
Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM
From 9:00AM To 6:00PM
My Account
Latest Replies
RE: beeping noise from hoover next washing machine
5 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
5 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...
Most Hit Discussions
How to clear LG Dryer error codes D80 D90 D95?
0 Votes 21 Replies 341705 Hits
Posted on Wednesday, 09 August 2017
LOGIK Washing Machine Error Codes
1 Votes 7 Replies 262570 Hits
Posted on Wednesday, 09 August 2017
Most Likes Discussions
How to fix Samsung Washing machine Error Code OE?
1 Votes 2 Likes 2 Replies
Posted on Monday, 07 August 2017
Kitchen Appliances
Unbeatable deals, free delivery and price match on the best range of cookers, ovens, washing machines, fridge freezers and more. Find everything you need at appliancentre.com or visit us in our Finchley store.
Get in touch
Visit us: 219 Regents Park road, London, N3 3LD
Order online: appliancentre.com
Email us: info@appliancentre.com
Kitchen Appliances
Our easy to use website hosts one of the largest collections of kitchen appliances online with up to 5000 home appliances and household electrical goods from leading appliance brands such as AEG, Miele, Bosch, Siemens, NEFF, Rangemaster, Smeg, Candy, Caple, CDA, De Dietrich, Hoover, Hotpoint, Indesit, Lec, Liebherr, Fisher & Paykel, Hisense, Samsung, LG, Haier, Blomberg and Zanussi. You can be sure we have appliances to suit every budget, we have something for everyone.
Deals & Offers
- Washing machines from £229
- Washer dryers from £299
- Dishwashers from £219
- Hobs from £99
- Built-in Ovens from £159
- Fridge freezers from £189
- Cookers from £199
- Range cookers from £499
Why choose appliancentre.com?
Rated Excellent - Rated Excellent with over 10000 happy customers
Free delivery - Next day delivery also available 6 days a week, or choose a date up to 530 days away
Hassle-free installation - Our experts deliver and install 100s of appliances every day
Price Match Promise - We'll match all retailers, even in the sales!
Order Now
The Appliance Centre is a leading retailer of kitchen appliances in London. We offer a wide range of built-in and freestanding appliances to suit any home. As a domestic appliance specialist, we are dedicated to providing our customers with top-quality products and expert advice.
Order Now
Simplified Solutions For London’s Landlords
At Appliance Centre we endeavour to take the hassle away from the agent or landlord by talking directly to the tenant to arrange site visits, delivery and training on the new appliances. We will offer free advice on all call-outs outlining the most cost effective solution for you whether that be a repair or replacement.