Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Monday, 24 July 2023
  0 Replies
  521 Visits
0
Votes
Undo
  Subscribe
AEG Washer Dryer (L7WEG841R)
Washer not drying, washes correctly.
The Heating Element checks out correctly.
Dryer Duct Fan starts at the beginning of the Drying Sequence and continues to run until the end of the drying sequence.
240 volts appears at the terminals of the Heating Element shortly after the Duct Fan starts but only stays ‘live’ for about 10 seconds.
There is an over-temperature sensor (trip) mounted near to The Heating Element, this checks out (Closed Circuit).
There are two other sensors mounted on the Fan Duct, one towards the front of the machine and a second one towards the back of the machine mounted near the Duct Fan (presume these are NTC Thermistors)
I get a resistance reading when checking these with an Ohmmeter.
Could one or both of these sensors be defective?
The machine does not display a Fault Code. (Do you need to press Control Button(s) in order to display Fault Codes)?
If so, which Button(s)
Rate this post:
John Noons set the post as normal priority — 9 months ago
John Noons set the type of the post as  Issue — 9 months ago
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
6 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
6 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...