Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Tuesday, 02 August 2022
  1 Replies
  681 Visits
0
Votes
Undo
  Subscribe
I have a Hotpoint WDF740P Washer/Dryer that has started to display a F-01 error code. This would seem to be related to a possible triac fault or Control PCB / Module fault. One recommendation is to visually check the Control PCB / Module and it's connections. My problem is I cannot find a drawing showing the location of this PCB / Module for my machine. I have located and removed the "Display PCB" from behind the main panel with the LED display and selector knobs / buttons, however I am unclear if this is the Control PCB / Module that could be causing the F-01 fault. I cannot see any component that looks like a Triac on this PCB, nor can I see any AC - DC circuitry, this leads me to believe that there must be at least one other module somewhere in the machine, however I can't seem to locate it.
My first question is, "Is this PCB the Main Control PCB / Module, and is the Triac located on this board?".
My second question is "if not, where is this PCB / Module located?"

Many thanks in anticipation,

Best regards


Andy Fisher
Rate this post:
Andrew Fisher set the post as normal priority — 1 year ago
Andrew Fisher set the type of the post as  Advice — 1 year ago
1 year ago
·
#2908
0
Votes
Undo
Forget that post, I've found it.

Many thanks anyway.

Andy
  • Page :
  • 1
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
6 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
6 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...