Monday - Friday: 08:00 - 20:00, Saturday: 09:00 - 18:00

Kitchen Appliance Fault Codes

Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges.

Error codes for Caple Dishwasher

  • Product Types: Dishwasher

Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.

Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.

Caple Dishwasher Error codes

These error code explanations can help you diagnose a problem with your Caple Dishwasher.

E1

Longer inlet time.

Issue:
Faucets is not opened, or water intake is restricted, or water pressure is too low.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

E3

Longer heating time, but not reaching required temperature

Issue:
Malfunction of temperature sensor or of heating element.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

E4

Overfilled

Issue:
Too much inlet water.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

E6

Failure of temperature sensor

Issue:
Open circuit or break of temperature sensor
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

E7

Failure of temperature sensor

Issue:
Short circuit or break of temperature sensor
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

Eco Light

The Eco light flicker fleetly - Longer inlet time.

Issue:
Faucets is not opened, or water intake is restricted,or water pressure is too low.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Caple Dishwasher Repairs in London.

The normal light and Eco flicker fleetly

Issue:
Longer heating time,but not reaching required temperature
Advice:
Malfunction of temperature sensor or of heating element.

The Rapid light flashes quickly

Issue:
Longer inlet time.
Advice:
The water is not switched on, or the water intake is restricted, or the water pressure is too low.

The ECO light flashes quickly

Issue:
Overflow
Advice:
Some element of the dishwasher is leaking.

The appliance is not working

Issue:
No water supply. The appliance does not load sufficientwater. There is a power failure. Starting the selected programme.
Advice:
  • Open the tap.
  • Clean the water supply tap filter.
  • Ensure there are no kinks in the water hose.
  • Insert the plug into the mains socket.
  • Press the Start button.
  • Close the door. Check the safety circuit breaker.
  • The programme can be set to "0" to start.

If crockery is notperfectly dry

Issue:
  • Insufficient rinse aid.
  • Residual water in cavities.
Advice:
  • Increase dosage *.
  • Load crockery at an angle

If crockery is not perfectly clean

Issue:
  • The water jet does not reach thecrockery.
  • Insufficient detergent.
  • Unsuitable programme.
  • Spray arms blocked.
  • Spray arm nozzles clogged.
  • Incorrect detergent/detergent too old.
Advice:
  • Arrange crockery so that items do not touch each other.
  • Load crockery upside down.
  • Follow recommended detergent dosage.
  • Select a more intense wash cycle.
  • The spray arms must be able to turn freely.
  • Remove any impurities obstructing the water flow.

Sandy or grainy residues

Issue:
Clogged filters.• Filters incorrectly assembled
Advice:
  • Check filters regularly/if necessary clean *.
  • Insert the filter correctly

Colour of plastic partsfaded

Issue:
Tomato/carrot juice, ...
Advice:
Depending on the material, if necessary use a detergent with a greater whitening power.

Identifying appliancefaults

Issue:
The START indicator lamp flashes. Indicator F... (if provided).
Advice:
  • Ensure the filter assembly is not clogged and that there is no interruption to the water supply (if necessary, clean the filters *).
  • Start the programme again.
  • Press the START button for 2 seconds, until the START indicator lamp switches off.
  • Select a new programme and press the Start button again.

Arrange a visit from a Dishwasher engineer

If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.

Book online or give us a call on 0208 226 3633

London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )

Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.

Read 1862 times

Comments (0)

Rated 0 out of 5 based on 0 voters
There are no comments posted here yet

Leave your comments

Posting comment as a guest. Sign up or login to your account.
Attachments (0 / 3)
Share Your Location

Ask a Question

Book Online

Arrange an engineer visit online (London only)

Book a Repair

Quick Question

Captcha

My Account

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Recent Discussions

I have a ariston washing machine. What does FO5 er
error code F05 Jayne...
14 Hits
0 Votes
0 Replies
Posted on Monday, 19 February 2018
  • New
    • #Washer Dryer

    Latest Replies

    Hi I have (had) the same problem. Fortunately I have hotpoint cover so called an engineer. He had never seen this code but took advice and decided it stood for H2O (water). He replaced a unit on t...

    Most Hit Discussions

    LOGIK Washing Machine Error Codes
    4164 Hits
    0 Votes
    0 Replies
    Posted on Wednesday, 09 August 2017
    • #Washing Machine
    Miele Dishwasher Error & Fault Codes
    1484 Hits
    0 Votes
    0 Replies
    Posted on Wednesday, 09 August 2017
    • #Dishwasher

    Most Likes Discussions

    Maytag Front Loading Neptune Washer Error Codes
    Guest
    No Ranking
    1 Likes
    1 Votes
    1 Replies
    Posted on Saturday, 05 August 2017
  • Resolved
    • #Washing Machine
    How to fix Samsung Washing machine Error Code OE?
    Guest
    No Ranking
    1 Likes
    1 Votes
    1 Replies
    Posted on Monday, 07 August 2017
  • Resolved
    • #Washing Machine