Monday - Friday: 08:00 - 20:00, Saturday: 09:00 - 18:00

Kitchen Appliance Fault Codes

Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges.

Error codes for Electrolux Tumble Dryer

  • Product Types: Tumble Dryer

Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.

Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.

Electrolux Tumble Dryer Error codes

These error code explanations can help you diagnose a problem with your Electrolux Tumble Dryer.

Error codes for Electrolux Tumble Dryer

E21

Canister fill pump triac faulty.

Issue:
Wiring faulty; Electronic board faulty. Cycle interrupted. OFF
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

E22

Triac “sensing” circuit for the canister fill pump faulty

Issue:
Electronic board faulty. Cycle interrupted.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

E51

Motor power triac short-circuited.

Issue:
Motor faulty; Wiring faulty; Electronic board faulty.
Advice:
Cycle interrupted If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E52

Intervention of motor overheating safety cut-out.

Issue:
Motor faulty; Intervention of motor overheating cutout; Wiring faulty; Electronic board faulty.
Advice:
Power to the heater unit and reversal of the direction of rotation are interrupted. If the problem does not re-occur, the alarm is memorized and the cycle continues. If the fault persists after several attempts to supply power (about 35 min.), alarm E51 is generated. If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E53

Motor triac “sensing” circuit faulty.

Issue:
Electronic board faulty.
Advice:
Cycle interrupted. If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E54

Motor in-operational.

Issue:
Excessive wash load; Voltage too low; Motor/transmission system inoperative
Advice:
Cycle paused after several attempts at powering the motor. If this fault indicator occurs again, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E61

Insufficient heating (maximum time exceeded).

Issue:
Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty.
Advice:
Cycle paused. If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E62

Power relay to heater unit faulty.

Issue:
Heater unit faulty; Wiring faulty; Electronic board faulty.
Advice:
Forced cooling cycle. If the problem persists, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E63

Intervention of auto-reset thermostat on the heater unit.

Issue:
Thermostat faulty (replace heater unit); Heater unit faulty; Wiring faulty; Electronic board faulty.
Advice:
Disconnects the power supply to the heater unit. If the problem does not re-occur, the alarm is memorized and the cycle continues. If, after several attempts to restore power, the fault persists, alarm E62 is generated. If this fault indicator occurs again, please arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

E64

Heater thermostat.

Issue:
Heater thermostat faulty: Wiring faulty; Electronic board faulty.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

E65

Fan motor triac faulty.

Issue:
Fan motor wiring not connected; Motor faulty; Triac interrupted.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

E66

Fan motor thermal protection.

Issue:
Fan motor wiring not connected; Motor faulty; Triac interrupted.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

E67

Triac control faulty.

Issue:
Fan motor wiring not connected; CRM board faulty.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Electrolux Tumble Dryer Repairs in London.

Arrange a visit from a Tumble Dryer engineer

If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.

Book online or give us a call on 0208 226 3633

London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )

Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.

Read 1634 times

Comments (0)

Rated 0 out of 5 based on 0 voters
There are no comments posted here yet

Leave your comments

Posting comment as a guest. Sign up or login to your account.
Attachments (0 / 3)
Share Your Location

Ask a Question

Book Online

Arrange an engineer visit online (London only)

Book a Repair

Quick Question

Captcha

My Account

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Recent Discussions

What does error code E67 mean
Hi, we have a IQ 500 washing machine and it has error code E67, what does that m...
8 Hits
0 Votes
0 Replies
Posted on Wednesday, 21 February 2018
  • New
  • Latest Replies

    Hi I have (had) the same problem. Fortunately I have hotpoint cover so called an engineer. He had never seen this code but took advice and decided it stood for H2O (water). He replaced a unit on t...

    Most Hit Discussions

    LOGIK Washing Machine Error Codes
    4226 Hits
    0 Votes
    0 Replies
    Posted on Wednesday, 09 August 2017
    • #Washing Machine
    Miele Dishwasher Error & Fault Codes
    1526 Hits
    0 Votes
    0 Replies
    Posted on Wednesday, 09 August 2017
    • #Dishwasher

    Most Likes Discussions

    Maytag Front Loading Neptune Washer Error Codes
    Guest
    No Ranking
    1 Likes
    1 Votes
    1 Replies
    Posted on Saturday, 05 August 2017
  • Resolved
    • #Washing Machine
    How to fix Samsung Washing machine Error Code OE?
    Guest
    No Ranking
    1 Likes
    1 Votes
    1 Replies
    Posted on Monday, 07 August 2017
  • Resolved
    • #Washing Machine