Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Fisher & Paykel Dishwasher DD605/DD60/DD24 models Error Codes
These error code explanations can help you diagnose a problem with your Fisher & Paykel Dishwasher DD605/DD60/DD24 models.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
E1
Rinse LED - The flood sensor in the base has been activated for more than 20 seconds.
- Issue:
- Lid not closing Overfilling Foaming Not draining Lid seal damage Dispenser or water softener seals leaking Damaged water inlet or drain hoses Leaking heater plate or motor seals, or drain o-ring seals Yoke jammed or broken Inlet hose to inlet valve connection loose Inlet valve body leak Heater plate damaged (chipped enamel) Dry E1 - PCB mains filter, harness or connectors, electronic controller.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E2
Delicate LED - The controller has not sensed the motor rotating
- Issue:
- Foreign object has jammed the rotor. The rotor has failed hall sensor or wiring fault at the hall sensor or controller. The hall sensor has failed Motor stator winding or connection open circuit. The electronic controller has failed. PCB mains filter has failed.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E3
Delicate & Rinse LED's - The water temperature has been sensed as greater than 85 °C (185 °F)
- Issue:
- The incoming water is greater than 85 °C (185 °F). The element has failed closed circuit. The temperature sensor on the heater plate has failed. The electronic controller has failed
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E4
Fast LED - No temperature increase has been sensed for about 4 hours while element is on.
- Issue:
- The element is not connected. The element is failed open circuit. The temperature sensor has failed. The electronic controller has failed
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E5
Fast & Rinse LED's - Lid motor current too high during start
- Issue:
- The lid is jammed up or down. The electronic controller has failed
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E6
Fast &Delicate LED's - Fan fault
- Issue:
- Check fan harness connector. Check if fan open or short circuit. The electronic controller has failed
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E7
Fast, Delicate & Rinse LED's - Detergent diverter fault
- Issue:
- Check harness connections. Coil is open circuit. Coil is short circuit. The electronic controller has failed
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E8
Normal LED - Solenoid fault
- Issue:
- Check the harness connections at each solenoid. Coil is open circuit. Coil is short circuit
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
E9
Normal & Rinse LED - Microcontroller fault
- Issue:
- Badge isolator (if present). Detergent diverter valve. Check harness connections. MFB. Controller
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
EC
Normal & Fast LED's - Communications error
- Issue:
- Harness connections between the MFB and controller. MFB. Faulty top controller. Faulty bottom controller
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
U1
Heavy & Rinse LED's - Water Supply
- Issue:
- Water turned off. Insufficient water supply pressure. Blocked water softener filter (if fitted). Spilt rinse aid casuing over foam in tub. Incorrect detergent being used. Motor rotor. The machine is siphoning. Inlet valve has failed. Controller
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
U4
Heavy & Fast LED's - Other tub is faulting
- Issue:
- The other tub has a fault which is preventing operation of that tub. No repair is required to the tub showing a U4.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
U6
Heavy, Fast & Delicate LED's - Spray arm not detected
- Issue:
- Spray arm not sitting on rotor. Insufficent water pressure
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Dishwasher Repairs in London.
Arrange a visit from a Dishwasher engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
