Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00

Kitchen Appliance Fault Codes

Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges.

Error codes for Zanussi Dishwasher

  • Product Types: Dishwasher

Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.

Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.

Zanussi Dishwasher Error Codes

These error code explanations can help you diagnose a problem with your Zanussi Dishwasher.

Zanussi DE series dishwasher error codes

The machine does not fill with water

Issue:
Washing phase indicator light flashing (Alarm AL5)
Advice:
Ensure the water tap is open. Ensure the mains water supply has not been cut off. The inlet hose may be squashed or bent. Reposition the hose. The inlet hose may be blocked. Switch off the water supply and clean the filter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

The dishwasher will not drain

Issue:
Drying phase indicator light flashes (Alarm AL6)
Advice:
The drain hose may be squashed or bent. Reposition the hose. The sink may be blocked. Clear any blockages. The drain hose extension is not correct. Follow the instructions for connecting to the waste. There is no vent in the end of the drain hose.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

General

Issue:
One or more phase indicator lights are flashing (Alarms AL1, AL2, AL3, AL7, AL8)
Advice:
Switch off the dishwasher. Switch it back on and start the programme. If the alarm reappears, please arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Protection against flooding is active

Issue:
Washing and drying phase indicator lights are flashing (Alarm AL4)
Advice:
Close the water tap and contact an engineer..
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Zanussi ZDTS series, DX series, ZDI series dishwasher error codes

Continuous flash of the light of the running programme — 1 flash of the end-of-programme indicator light

Issue:
The water tap is blocked or furred with limescale. Clean the water tap. The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Continuous flash of the light of the running programme — 2 flashes of the end-of-programme indicator light

Issue:
There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. The hose can be kinked or squashed. Make sure that the connection is correct.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Continuous flash of the light of the running programme — 3 flashes of the end-of-programme indicator light

Issue:
Close the water tap and contact an engineer.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

The machine does not fill with water

Issue:
washing phase indicator light flashing (Alarm AL5)
Advice:
Ensure the water tap is open. Ensure the mains water supply has not been cut off. The inlet hose may be squashed or bent. Reposition the hose. The inlet hose may be blocked. Switch off the water supply and clean the filter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

The dishwasher will not drain

Issue:
Drying phase indicator light flashes (Alarm AL6)
Advice:
The drain hose may be squashed or bent. Reposition the hose. The sink may be blocked. Clear any blockages. The drain hose extension is not correct. Follow the instructions for connecting to the waste. There is no vent in the end of the drain hose.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Protection against flooding is active

Issue:
Washing and drying phase indicator lights are flashing (Alarm AL4)
Advice:
Close the water tap and contact our customer service centre to book an engineer on: 0208 226 3633

General

Issue:
One or more phase indicator lights are flashing (Alarms AL1, AL2, AL3, AL7, AL8)
Advice:
Switch off the dishwasher. Switch it back on and start the programme. If the alarm reappears, please arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Continuous flash of the light of the running programme

Issue:
The water tap is blocked or furred with limescale. The water tap is closed. The filter in the water inlet hose is blocked.
Advice:
Clean the water tap. Open the water tap. Clean the filter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

1 flash of the end-of-programme indicator light

Issue:
The water tap is blocked or furred with limescale. The water tap is closed. The filter in the water inlet hose is blocked.
Advice:
Clean the water tap. Open the water tap. Clean the filter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Intermittent audible signal

Issue:
The water tap is blocked or furred with limescale. The water tap is closed. The filter in the water inlet hose is blocked.
Advice:
Clean the water tap. Open the water tap. Clean the filter.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Continuous flash of the light of the running programme

Issue:
There is a blockage in the sink spigot. The connection of the water drain hose is not correct. The hose can be kinked or squashed.
Advice:
Clean the sink spigot. Make sure that the connection is correct.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

Intermittent audible signal

Issue:
There is a blockage in the sink spigot. The connection of the water drain hose is not correct. The hose can be kinked or squashed.
Advice:
Clean the sink spigot. Make sure that the connection is correct.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

2 flashes of the end-of-programme indicator light

Issue:
There is a blockage in the sink spigot. The connection of the water drain hose is not correct. The hose can be kinked or squashed.
Advice:
Clean the sink spigot. Make sure that the connection is correct.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Dishwasher Repairs in London.

3 flashes of the end-of-programme indicator light

Issue:
Advice:
Close the water tap and contact an engineer. We offer fixed price Zanussi Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Arrange a visit from an Appliance engineer

If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.

Book online or give us a call on 0208 226 3633

London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )

Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.

Read 80044 times

Ask a Question

Book Online

Arrange an engineer visit online (London only)

Book a Repair

Quick Question

Captcha

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Recent Discussions

Microwave tripped candy oven now it won’t turn on
611 Hits 0 Votes 0 Replies
Posted on Saturday, 04 November 2023
Hi, I turned on the microwave this morning and it switched my oven off and now ...

Latest Replies

RE: beeping noise from hoover next washing machine
4 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
5 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...